British Pattern 1853 socket bayonet with leather scabbard and a frog This is a British M1853 Socket Bayonet for use with the Enfield, Snider, Martini rifles. This 1853 pattern was the standard bayonet carried by nearly every British infantryman of the mid-19th century and widely used during the Crimean War, Indian Mutiny, and in numerous colonial campaigns. Production of the1853 pattern socket bayonet continued throughout the life of the Enfield Muzzleloader and the Snider rifle and was finally terminated in 1875. The blade has a slight downward curve to allow easier reloading while fixed to the muzzle-loading Enfield rifle. Measuring 44 cm (17 inches), it features a triangular cross-section with fullers on all three sides, tapering to a narrow, down-turned point. Scabbard in good condition and includes a leather frog. The brass tip on the scabbard wiggles a bit but is still solidly attached. The scabbard is stamped W.D. (War Department) below the frog stud with the Broad Arrow symbol above the initials. The top of the blade at the base is stamped with an E over a crown over the number 25 Overall Length – with blade in scabbard - 21 3/4” Length of Bayonet – 20 5/8” Length of Grip including the Guard – 3 5/8” Blade Length – 17” $200.00 Thanks, Phil

categories:GunsSporting Goods

2225 impressions

60 views

WW1 French M1886 bayonet for the Lebel rifle. This is the war time simplified version without the quillion (hook) and with the brass handle. This version with the brass handle is of a type produced during the First World War, from the 25th of October 1914 until July of 1917.   The left side of the blade has the initials SG stamped just in front of the guard to identify the Maker.  The "S.G." mark on a French bayonet from the World War I era stands for Sutterlin Lippmann & Cie., a manufacturer located in Saint Étienne. The base of the guard has a stylized letter P with the number 45979 stamped into it. The scabbard has this matching serial number. The base of the grip has the number 11 stamped into it. The release button works as designed.   Overall Length – with blade in scabbard  - 25 3/4” Length of Bayonet – 25 1/8” Length of Grip including the Guard – 4 5/8” Blade Length – 20 1/4”   $250.00   Thanks, Phil

categories:GunsSporting Goods

2455 impressions

79 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have a brand new Browning X-Bolt Target McMillan A3-5 Ambush Rifle in 6.5 Creedmoor for sale. It’s a precision bolt-action target rifle in a Carbon Fiber McMillan A3-5 stock w/adjustable comb and with a stainless steel 26" fluted bull barrel with muzzle brake. Featured in Urban Carbon Ambush camouflage it’s got an 60 degrees bolt throw with an extended bolt handle, an adjustable feather trigger, 4 rd detachable clip, Pachmayr Decelerator recoil pad, 20 MOA Picatinny optics rail and bipod rail. I am the first owner of this new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served. 
Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION Browning X-Bolt Target McMillan A3-5 Ambush Rifle, 6.5 Creedmoor. Made to the high standards you expect from Browning, this quality X-Bolt Target McMillan A3-5 Ambush Rifle is chambered in 6.5 Creedmoor and comes equiped with numerous features. These features include the Carbon Fiber McMillan A3-5 stock with an ajustable comb, a free-floating fluted barrel with a muzzle brake on 5/8-24 suppressor threads, picatinny rail for bipod mounting, a gray stainless steel 26" bull barrel, an adjustable feather trigger, detachable rotary magazine, a urban carbon ambush finish and more. Included with this bolt action rifle is two quick detach swivel cups, a 20 MOA picatinny rail, and a glass bedded receiver with a matte blued finish. The McMillan A3-5 stocks are US Marine proven tough, and are proudly featured on these X-Bolt models. PRODUCT FEATURES - Carbon Fiber McMillan A3-5 Stock Marine proven tough, this premium Carbon Fiber stock comes with an installed adjustable comb, textured gripping surfaces, palm swell, a Pachmayr Decelerator recoil pad, and finished in an Urban Carbon Ambush. This stock is a variation of McMillan's famous A-3 stock but with the addition of an A-5 type butt hook on the bottom of the butt. The flat on the bottom of the hook is about 3/4" wide. This stock comes with a thumbwheel elevator system which allows for precise vertical adjustments. With the adjustable comb you can adjust and align your sight plane to match the scope - Decked out 26" Long Bull Barrel Manufactured from gray stainless steel, this free-floating fluted barrel includes a muzzle brake on 5/8-24 suppressor threads, a thread protector, and an embedded target crown - Extended Bolt Handle, Feather Trigger, and 20 MOA Picatinny Rail This ambush rifle includes a steel constructed, glass bedded receiver that features a matte blued finish, a 60 degrees bolt lift with an extended bolt handle, an adjustable feather trigger, detachable rotary magazine, top tang safety, and bolt unlock button. The X-Bolt's three-lever gold plated Feather Trigger provides a clean, crisp pull with no take-up or creep and minimal overtravel. Attaching the ideal scope or accessory is easy with the aluminum manufactured 20 MOA Picatinny rail as well attaching a bipod or light to the included bottom rail SPECIFICATIONS Model Code - 035451282 Action Length - Short Action Barrel Length - 26" Overall Length - 46" Length of Pull - 13 5/8" Weight - 10 lbs 0 oz Magazine Capacity - 4 Twist Rate - 7" Barrel Finish - Satin Gray Stock Finish - Urban Carbon Ambush Receiver Finish - Matte Blued Chamber Finish - Polished Barrel Material - Stainless Barrel Contour - Bull Stock Material - Carbon Fiber Recoil Pad - Pachmayr Decelerator Checkering - Textured Grip Panels Sling Swivel Studs - 2 QD Cups Receiver Material - Steel Trigger Finish - Gold Plated Bolt Slide Finish - High Gloss Magazine Type - Detachable Trigger Material - Alloy

categories:GunsSporting Goods

26228 impressions

972 views

*PENDING* More available if interested! Please include phone # with communications.  Best to use text, TownPost messaging or request email. NEW! Savage AXIS XP 25-06 Rem Bolt Action Compact Rifle w/Weaver 3-9x40mm scope combo package for sale.  All ready to go for target shooting and hunting seasons.  I am the first owner of this rifle combo and never fired the rifle. It has a 22” button-rifled barrel and a 4 round detachable clip.  With its flat shooting trajectory it’s a good option for deer and other game - see weblink: https://www.ronspomeroutdoors.com/blog/25-06-remington-beats-6-5-creedmoor#:~:text=The%20unheralded%2025%2D06%20Remington,2.5%20inches%20at%20600%20yards! SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS Valid PAL required, will come with transfer # as per new laws. First Paid, First Served. Holds only with deposit. Delivery Negotiable. Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION It's the fastest way to go from the store to the stand. The AXIS XP comes with a factory-mounted and boresighted 3-9x40mm scope that extracts maximum accuracy from the rifle's button-rifled barrel. It features a tough synthetic stock and detachable box magazine. FEATURES Factory-mounted and boresighted 3-9x40mm scope Detachable box magazine Tough synthetic stock Button-rifled barrel Smooth bolt action Thread-in barrel headspacing SPECIFICATIONS AXIS XP SKU - 57262 Calibre - 25-06 Rem Barrel Length - 22" (55.88 cm) Rate of Twist - 1:10" Mag. Cap. - 4 Magazine - Detach. Box Stock Pull Length - 13.75" (34.93 cm) Stock QD Studs - 2 Length - 42.5" (107.95 cm) Weight - 7.37 lbs (3.34 kg)

categories:GunsSporting Goods

4551 impressions

382 views

*Still available if posted* Please include phone # with communications. Best to use text, TownPost messaging or request email. NEW! Savage AXIS XP 223 Rem Bolt Action Compact Rifle w/Weaver 3-9x40mm scope combo package for sale. All ready to go for target shooting and hunting seasons. I am the first owner of this rifle combo and never fired the rifle. It has a 20” button-rifled barrel, 4 round detachable clip, and is a nice compact size, perfect for a first hunting or shooting rifle. *SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS* Valid PAL required, will come with transfer # as per new laws. First Paid, First Served.
 Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION It's the fastest way to go from the store to the stand. The AXIS XP comes with a factory-mounted and boresighted 3-9x40mm scope that extracts maximum accuracy from the rifle's button-rifled barrel. It features a tough synthetic stock and detachable box magazine. FEATURES • Factory-mounted and boresighted 3-9x40mm scope • Detachable box magazine • Tough synthetic stock • Button-rifled barrel • Smooth bolt action • Thread-in barrel headspacing SPECIFICATIONS AXIS XP SKU - 57265 Calibre - 223 Rem Barrel Length - 20" (50.8 cm) Rate of Twist - 1:9" Mag. Cap. - 4 Magazine - Detach. Box Stock Pull Length - 12.75" (32.39 cm) Stock QD Studs - 2 Length - 39.5" (100.33 cm) Weight - 7.32 lbs (3.32 kg)

categories:GunsSporting Goods

3591 impressions

191 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have a brand new Sako 85 Finnlight II Rifle, 30-06 SPRG, in a Cerakote Tungsten treated stainless steel action with an elastomer grip/black composite stock. It’s got a 22.4” fluted barrel, adjustable trigger (2-4lbs), 5rd magazine, and adjustable cheekpiece. SAKO Model #SBW3114A1930B4 I am the first owner of this brand new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served.
 Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION Building on the famous Finnlight name, the Sako 85 Finnlight II is an icon reborn. The lightweight RTM fiberglass stock makes the rifle light to carry and the barrel has been treated with a weather resistant Cerakote® coating, which makes this rifle the perfect choice for all conditions. The fully adjustable cheek piece also makes the rifle perfectly customizable for your preferences. SPECIAL FEATURES * HIGH QUALITY RTM FIBERGLASS STOCK 
The composite stock is manufactured with aerospace grade RTM technology. All Finnlight II stocks have carbon fiber bedding to ensure maximum accuracy and stability in all temperatures.
 * BARRELED ACTION 
Cerakote® treated stainless steel action for maximum weather resistance.
 * SECURE GRIP 
The grip surfaces and the cheek piece are made from robust elastomer.
 * ADJUSTABLE CHEEK PIECE 
Maximum precision and unique comfort for each shot. STANDARD FEATURES * ACTION 
Sako 85 actions come in six different sizes (CSA), providing reliable functioning for each caliber. All Sako 85 models feature controlled cartridge feed (RCS) to eliminate double feed or cartridge jams. The turn-bolt handle places the hand in a natural position during bolt operation, which allows for rapid repeated firing.
 * BARREL 
Sako 85 barrels are manufactured with a passion for craftsmanship and the very best knowledge of Sako. Barrel blanks are drilled, honed, cold- hammer forged, finished and finally individually inspected by an optical fine-tuning instrument: the human eye. Twist rates are chosen for each caliber to optimize accuracy and bullet performance. Sako 85 barrels, blued or stainless, have a non-reflecting, satin-like surface – with the exception of the Sako 85 Deluxe and Safari models that have a highly polished finish.
 * MAGAZINE 
The staggered, two-row magazine of the Sako 85 is made of stainless steel. The detachable magazine can also be loaded through the ejection port. The Total Control Latch (patent pending) of the Sako 85 prevents accidental magazine release.
 * SAFETY 
The special two-way Sako safety locks both the trigger and the bolt handle. The unique bolt release button of the Sako Safety System allows you to load or remove a cartridge from the chamber while the safety is engaged.
 * SIGHTS 
Most of the Sako 85 models with a blued finish on the barrel are available with either standard or optional adjustable iron sights. The front bead is adjustable in elevation and the rear blade in windage.
 * STOCK 
The ergonomics of Sako 85’s walnut and synthetic stocks are built for an optimal shooting posture. The excellent balance and smooth bolt operation of Sako 85 rifles enable fast, straight and accurate operation.
 * TRIGGER 
The weight of pull of the single- stage Sako 85 trigger unit is adjustable from 1 to 2 kg (2–4 lbs). An optional single-set trigger is available for most Sako 85 models. All Sako 85 rifles have an extremely durable, all-steel trigger guard that protects the trigger. An exception to this are the Finnlight and Carbonlight models, which have a lightweight hard-anodized aluminium trigger guard. SPECIFICATIONS MPN - SBW3114A1930B4 Caliber - 30-06 Sprg Receiver Size - M Handedness - Right Weight - 2.8 kg / 6.17 lbs Total Length - 1090 mm / 42.9 in Barrel Length - 570 mm / 22.4 in Rate of Twist - 1:11" Magazine - Detachable Magazine Capacity - 5 + 1 Trigger - Single Stage Trigger Stock Material - Composite Stock Finish - Black Material - Cerakote Tungsten Muzzle Thread - No Cheek Piece - Adjustable Open Sights - No

categories:GunsSporting Goods

32188 impressions

943 views

**SOLD** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. New! TriStar Viper G2 Semi-Auto Shotgun 12 Gauge, 28” vent rib barrel, 3 inch, synthetic stock, righthanded, 5+1 rd, Mobilchoke, and fiber optic front sight.
Comes with length of pull shims and 3 chokes - Full, Improved Cylinder and Modified(factory installed in the barrel). The TriStar Viper G2 is model number 24105. I might be interested in a 243 Win rifle/combo depending on brand and condition - local trade. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served.
Holds only with deposit. Delivery Negotiable.
Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION The TriStar Viper Series Semi Automatic Gas Operated Shotguns are reliable, functional and hard working. Synthetic models have 3″ chambers to take 2 3/4″ or 3″ shells. Chambers are chrome lined. Barrels are threaded for the Beretta/Benelli style choke tubes and every gun comes with 3 tubes (IC, M, F) standard. Manual E-Z Load Magazine Cut-Off. Vent Rib with Matted Sight Plane. Fiber Optic Front Sight. 3 Beretta/Benelli Style Chokes (IC, M, F). 5 Round Magazine. Chrome-line Chamber and Barrel. Soft Touch on all Synthetic Models. WEIGHT - 6.9 lbs LENGTH OF PULL - 14.25”

categories:GunsSporting Goods

26960 impressions

885 views

Great little rifle made in Germany Diana R-22 22LR, Carbon fiber wrapped barrel, super accurate, less than 200 rounds shot, all the rounds were shot CCI mini mag 36gr. Diana R-22 features an ergonomic all-weather polymer stock in an attractive OD Green. The hammered precision carbon fiber wrapped barrel comes with a 1/2” UNF muzzle thread with countersunk muzzle. The dry-standing direct trigger offers an adjustable trigger weight of approx. 2-2.9 lb. Picatinny rails on receiver and forend allow for sturdy optics and bipod mounting. With a proven heritage of precision and accuracy the new Diana R-22 rimfire rifle sets the new standard in performance rimfire target shooting. Caliber: .22LR Capacity: 10 Rounds Action: Bolt Action Stock: Fixed, Polymer, OD Green Sights: Open Barrel: 18.5" Carbon Fiber Trigger Weight: 4 lbs. Overall Length: 37.5" Weight: 6.1 lbs. *** Notice, in order to purchase this rimfire rifle must comply with the law, I am required by law to see possession of legal firearm license and verify by RCMP website***

categories:GunsSporting Goods

18035 impressions

727 views

British Pattern 1853 socket bayonet with leather scabbard This is a British M1853 Socket Bayonet for use with the Enfield, Snider, Martini rifles. This 1853 pattern was the standard bayonet carried by nearly every British infantryman of the mid-19th century and widely used during the Crimean War, Indian Mutiny, and in numerous colonial campaigns. Production of the1853 pattern socket bayonet continued throughout the life of the Enfield Muzzleloader and the Snider rifle and was finally terminated in 1875. The blade has a slight downward curve to allow easier reloading while fixed to the muzzle-loading Enfield rifle. Measuring 44 cm (17 inches), it features a triangular cross-section with fullers on all three sides, tapering to a narrow, down-turned point. The blade is in good solid condition but is badly tarnished. The scabbard is in fair condition. The bottom brass below the frog hook is pulled free from the leather scabbard. The brass tip on the scabbard wiggles a bit but is still solidly attached. The stitching on the scabbard in the last 3 ½” above the end cap is partially missing but the scabbard is solid and not separating. The scabbard is stamped W.D. (War Department) below the frog stud with the Broad Arrow symbol above the initials. This stamping is difficult to see. The top of the blade at the base is stamped with an E over a crown over the number 25 Overall Length – with blade in scabbard - 21 3/8” Length of Bayonet – 20 3/4” Length of Grip including the Guard – 3 5/8” Blade Length – 17 1/8” $125.00 Thanks, Phil

categories:GunsSporting Goods

637 impressions

33 views

2) Ithaca High Standard Elevator - .850" W x 1.00" L - $30 3) Elevator X - .104" W x 0.89" L - OAL = 1.65" - $35 4) Cooey Elevator - .075" x 1.21" - $15 5) Husqvarna Elevator - $45 6) Marble Double Step - Rifle Elevator - $35 7) Marble Double Step - Carbine Elevator - $35 8) Marlin Elevator M1 - Marlin S-25 Sight - .046" W x 1.60" L - $35 9) Marlin Elevator M2 - Marlin S-25 Sight - .055" W x 1.60" L - $35 10) Marlin Elevator (336 - 1894 - 1895) - .115"W x 1.43"L - SOLD 11) Marlin Early Fishhook Elevator- .075" W x 1.22" L - $35 12) Marlin Elevator - Marlin S-27 Sight - .095" W x 1.15" L - SOLD 14) Remington 98 1/2 Sight - 105 Elevator - Round Barrel Model 12 Rifles - $45 15) Remington "R" Elevator (701 1/2) - .057" W x 1.11" L - SOLD 16) Savage Folding Sight Elevator - .061" W x 1.13" L - $40 17) Savage Fishhook Elevator - $40 18) Savage 1899 Elevator - .095" W x 1.05" L - OAL = 1.27" - SOLD 19) Savage 99 Elevator - .095" W x 1.15" Lo - $40 21) Savage 24 Elevator (Replacement Style) - $25 22) Win Early Elevator - $40 23) Winchester 1A Elevator - dated (.207") - $60 24) Winchester 1B Elevator - dated (.162") - $60 25) Winchester 1C Elevator - no date (.175") - $60 28) Win 2C Elevator - .60"W x 1.625"L - $35 29) Winchester 3C - 6S Elevator - $50 - 31) 6-48 Filler Screws (4) - Blue $20.00 32) 6-48 Pan Head Filler Screws (4) - Blue $20.00 33) 6-48 Filler Screws (4) - Stainless $20.00 34) 8-40 Pan Head Filler Screws (2) $20.00 35) DT-1 - 3/8" DT Filler - Blue - Curved Top - $45.00 36) DT-2 - 3/8" DT Filler - Stainless - Curved Top - $50.00 - 40) Husqvarna Front Sight Hood - $85 41) Marlin pre 72 Round Front Sight Hood - $45 42) Marlin post 72 Front Sight Hood - $60 43) Sako - Finnwolf Hood - $85 44) Browning (Japan) BLR - BAR Front Sight Hood - SOLD 45) Parker Hale Front Sight Hood - $85 46) Browning (Belgium) Safari Front Sight Hood - $85 47) Winchester Model 9422 Front Sight Hood - $40 48) Winchester post 64 Model 94 Front Sight Hood - $40 49) Winchester pre 64 Model 94 Front Sight Hood - $40 50) Winchester Model 70-88-100-64-65 Front Sight Hood - $40 51) Winchester post 64 Model 70 Front Sight Hood - $75 52) Winchester post 64 Model 70 Front Sight Hood (Long) - $85 53) Winchester (97 Sight - Model 69) Front Sight Hood - $75 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

207361 impressions

2865 views

Smith Ent - Tempe Arz - 42A Rifle Ladder Sight . Standard 3/8" Dovetail . As new Condition . $325.00 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

2639 impressions

94 views

Bushnell scope that tells you how many yards an object is. Great for multiple rifles. Has a hand devise that makes it easier to sight in the yardage. Great visual and is a really great scope! My shots were always accurate! Great if you don’t wanna make the extra travel and don’t want to just free stand. Well taken care of. Hate to part with it, but wanted a different scope for my oak 270 rifle.I am open to any offers. Please message me for more info.

categories:GunsSporting Goods

16015 impressions

564 views

Quick Release Walking/Climbing Rifle Sling Stabilizer. Made from 1" heavy webbing with 1" Side Release Buckles. Hand free to climb tree stands, riding quads. Will fit most slings. Patent Pending.. Live around Busby, Onoway area. Will ship anywhere in Canada for $5

categories:GunsSporting Goods

37448 impressions

1404 views

HAD A STROKE AND MOVING CLOSE TO KIDS. 1980 BOXFORD MODEL 330 IS 13X40, 1/12 BORE, 3PHASE 220VOLT (PHASE CONVERTER INCLUDED) 2.5/1.75HP 2SP MOTOR,30-3000 RPM, ELECTROMAGNETIC BRAKE, CHANGE GEARS FOR 31/2-128 TPI (.2-7MM),TAPER ATTACHMENT, COOLANT PUMP, 4-JAW PRATT BURNERD CHUCK, 3 JAW PRATT BURNERD,6 TOOL HOLDERS DREHBLITZ 7.5 DEGREES ADJUSTMENT, 10'' FACEPLATE, STEADY REST,MISC TOOL ACCS. $50,000.00 #1 MILLING MACHINE,R8 SPINDLE, USED FOR MOSTLY FLUTEING BARRELS, 220-3400RPM, PULLEYS, 1''X 8"X 36'' ALUMINUM TABLE EXT., 20'' TABLE TRAVEL,SERVO POWER FEED,TILT HEAD 45 DEG., SWIVEL HEAD, $15,000. LARGE TOOL BOX WITH INSERTS, DRILL BITS & MISC.MEASURING INSTRUTMENTS. $3000.00. RIFLE BARREL CART WITH MISC TAKE OFFS, $1000.00 #2 MILL IS A CRAFTEX 601, 33 X 81/2 TABLE, CUSTOM STAND FOR COOLANT,DC VARIABLE SPEED, 50-2300RPM, 110VOLT- 12AMP, 4"HOLME VISE, 6'' DIVIDING HEAD, R8 SPINDLE, $8000.00. GUN RACK FOR STANDING GUNS, 2- 6'' GRINDERS'. WORK BENCH WITH VICE & BBL VICE, $3000.00. MISC. JIGS AND FIXTURES, DRILL PRESS WITH HEAVY STAND MADE WITH VICE AND 2 TON ARBOUR PRESS, $1000.00 BALDOR 10" BUFFER WITH STAND, POLISHING GRIT, WHEELS, $2000.00-4 BLUING TANKS WITH STAND AND SOME RUST BLUE, $1000.00 8"BANDSAW LIKE NEW, $750.00. BLASTING CABINET IS SILICONE SEALED FOR INDOOR USE, ALO GRIT, NEEDS A VACUM, $1000.00 3 MONTHS OF TRAINING WITH MACHINES(I HAVE LOTS OF WORK)$10.000 MONTH IF NEEDED.

categories:GunsSporting Goods

3702 impressions

295 views

Brand new Non restricted Lever Action Caliber: .44 Magnum Capacity: 6-Rounds Front Sight: Drift Adjustable Rear Sight: Adjustable Buckhorn Trigger: Standard Frame: Alloy Steel Barrel: Alloy Steel Barrel Length: 12" Finish: Black Oxide (Barrel) and Black Oxide (Frame) Stock: Wood Safety: Thumb Safety Length: 24" Weight: 88.00 Oz. Part #: RH92044121

categories:GunsSporting Goods

3965 impressions

258 views

Brand new Non-restricted Caliber: .223 Remington / 5.56 NATO Capacity: 5 Action: Lever Action Safety: Transfer Bar Receiver Finish: Hard Anodized Black Barrel: 16.5" Round Blued steel Front Sight: None Rear Sight: None Scopeability: Picatinny Rail Included Scope Mount Type: Rings/Mount for Standard Picatinny Rail Stock Material: Birch Laminate Buttplate: Black Solid Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:9 Overall Length: 37" Weight: 7.0 lbs. Made in USA

categories:GunsSporting Goods

2747 impressions

139 views

Brand new Non-restricted Caliber: 308 WIN Action: Bolt Action Barrel Length: 57 cm / 22.4" Barrel Type: Standard light - 16mm - Brunita - senza mire Full Length: 109.5 cm / 43.1" Rate Of Twist: 1/10" Stock: Standard - Pistol grip standard Weight Unloaded: 3300 (57cm barrel & no scope) Stock Finishing/Color: Synthetic Black Barrel Thread: M14 Magazine Capacity: 5 Recoil Pad: Extralight® Trigger: Adjustable Made in Italy

categories:GunsSporting Goods

1833 impressions

76 views

Description New in box Unleash the power of tradition with the Marlin 70432 1894 SBL, a modern take on a classic lever-action design, perfect for Canadian hunters, sport shooters, and collectors. Chambered in .44 Magnum, this rifle combines rugged performance with exceptional craftsmanship, making it an ideal companion in the field or on the range. The Marlin 1894 SBL is designed to meet the needs of Canadian firearms enthusiasts who value quality, versatility, and performance. Its .44 Magnum chambering offers outstanding stopping power, while its rugged construction ensures reliability in tough Canadian conditions. Features Stainless Steel Barrel and Receiver Durable Grey Laminate Stock Large Loop Lever XS Lever Rail w/ Ghost Ring Sights 8+1 Round Capacity 16.1″ Barrel Length Specifications Model# 70432 44 Rem Mag / 44 Special Chambering Grey Laminate Stock Stainless Steel Material Polish Stainless Finish Fiber Optic Front Sight w/ Tritium Rim Adjustable Ghost Ring Rear Sight 6.3 lbs. Overall Weight 33.25″ Overall Length 13.38″ LOP 16.1″ Barrel Length 5/8-24 Threaded Barrel Match-Polished Thread Cap Cold Hammer-Forged Stainless Steel Barrel 1:20″ RH Twist, 6 Grooves

categories:GunsSporting Goods

65833 impressions

2510 views

Want a new optic, and want to buy Canadian? There's a new option for Canadian glass, sort of: Apex Optics is based in Calgary, but its scopes are actually manufactured in Japan. Apex Optics was founded in early 2020 by a group of western shooters from a range of competitive disciplines. Their goal was to create a new optics brand for competition and long-range shooting reflecting their backgrounds (IPSC, Steel Challenge, 3-Gun, Precision Rimfire, Extreme Long Range, etc.). Several of these shooters are well-known in the west's shooting scene, with long history of competition. Apex's first release will be the Rival 4-32x56 mm, which it's been developing for about 18 months. Apex partnered with Japan Optics to actually manufacture the scope, although it's designed here in Canuckistan. The scopes also undergo quality control testing in Japan, and a secondary round of quality control in Calgary. This scope has some unique features due to its design process, including Apex's proprietary CLR competition reticle. This first focal plane reticle is designed for long-range matches where shooters need their scope to handle quick transitions, with top half of the reticle unobstructed. It comes with ranging marks, for scenarios where you can't use electronic rangefinders, and has six-level illuminated main stadia. You can see a full explanation of the CLR reticle design at Apex's website. The scope also comes with elevation turret that features 15 MILs per revolution; windage and elevation adjustments are 0.1 MIL per click. The turrets are not locking, but come with mechanical zero stop and two-turn indicators (future scopes may come with locking turrets). There's a stainless steel pop-up turn indicator. Apex says it has the industry's first see-through integrated and removable throw lever. The new Rival scope has parallax knob indicators for approximate value for 100-, 200-, 500-, and 800-yard distances. There's a proprietary hydrophobic seven-layer multi-coated lens, and other features selected to give Apex's customers top performance. The scopes are certified IP67 dustproof/waterproof, and 1200G shockproof. THE BEST WARRANTY YOU'LL NEVER HAVE TO USE. WORLD-CLASS SUPPORT WHEN YOU DO, THAT IS OUR OATH TO YOU! All of our products carry a Lifetime Warranty. We’ll replace any product if it’s not up to our standards of quality and durability, no questions asked. If something stopped working as it should, then let us know and we’ll take care of it at no cost to you. The only things we don’t cover are “Acts of God” like fire, lighting strikes and flooding. Most of those scenarios are typically covered by your insurance. We also don’t cover theft or intentional/neglectful damage or destruction.

categories:GunsSporting Goods

77941 impressions

5017 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:GunsSporting Goods

81156 impressions

2411 views

Brand new Non-restricted Bolt action Caliber: 6.5 Creedmoor Capacity: 4 Magazine: Flush Fit Material: Alloy Steel Stock: Olive Green Synthetic Sights: Weaver Rail Barrel: 22", Cold Hammer Forged Twist: 1:8" RH, 6 Grooves Finish: Matte Black Overall Length: 42" Weight: 7.6 lbs. Equipped with a factory-installed Vortex® Crossfire II® riflescope with the Dead-Hold BDC reticle mounted on one-piece Picatinny scope base. Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user adjustable between 3 and 5 pounds, allowing shooters to make that perfect shot. Ergonomic, lightweight synthetic stock designed for quick, easy handling blends a classic look with modern forend contouring and grip serrations. Soft rubber buttpad is crafted for maximum recoil reduction. The one-piece, three-lug bolt with 70° throw provides ample scope clearance and utilizes a full diameter bolt body and dual cocking cams for smooth, easy cycling from the shoulder. Patented Power Bedding®, integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy. Factory-installed, one-piece Picatinny scope base. Outstanding accuracy helps make every hunt a success. Heavier tapered, threaded barrel with factory-installed thread protector is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity. The visible, accessible and easy-to-actuate tang safety provides instant security. Coming with: Vortex Crossfire II 4-12 x 44 Riflescope w/ Rings 1x Magazine 1x Cable Lock Manual Made in USA

categories:GunsSporting Goods

19739 impressions

833 views