I am offering my Sako 90 Hunter Stainless Rifle in 270 win caliber.  I have fired exactly 34 rounds through it.  This is a gorgeous rifle.  It is in terrific condition, and it's only blemish is a faint scratch on the side of its walnut stock (see pic).  These rifles retail new at $2750+ G.S.T.  It has a 3-10x42mm Swarovski Z3 rifle scopes mounted with Sako rings and bases.  These scopes are top-of-the-line optics and retail for >$1200+ G.S.T.  This rifle is also being sold with a leather padded Sako should sling. Also included in this package is various ammo: 48 rounds of Barnes VOR-TX .270 Win 130gr Ammunition 98 rounds of Federal Premium .270 win 130gr Nosler Partition Ammunition 20 rounds of Hornady Superformance SST .270 win 130gr Ammunition 40 rounds of Nosler Trophy Grade .270 win 130gr Ammunition 40 rounds of Winchester Ballistic Silvertip .270 win 130gr Ammunition  This is being sold only as a package.  I am asking $3800 for everything that is listed above. If you're interested please call (780) 621-6346

categories:GunsSporting Goods

2352 impressions

140 views

Anschutz 22LR, Model 1761 D HB G-20 walnut Classic - Bolt Action, 20" heavy barrel, second factory barrel -18" threaded (1/2-20) barrel - NEW not shot. Bushnell 4500 Series Scope 6-24 x 40 with side focus Parallax. Lapua Midas ammo. 22LR (450) Ammo. stays with rifle. Shot 100 rounds of Federal LR and 50 rounds of Lapua Midas.

categories:GunsSporting Goods

102615 impressions

5200 views

1500.00 - Browning Medallion 7mm Rem. Mag; 26'' barrel with Boss. With Boss you can adjust to shoot any bullet accurately and reduces recoil. Some minor scoff marks on stock. Shoots the HSM 168gr. at 3140 f/s and about 2'' group at 300 yds. Also have drop chart to 800 yds. Second magazine and reloading RCBS dies. 1200.00 - Bushnell tactical 4.5 x 30 x 50mm with side focus. Scope set for 250 yds. and tactical dial up to 800yds. 810.00 - 119 rds. - HSM 168gr. Berger bullets. 50.00 - 20 rds. - Federal Premium 150gr. boat tail soft point. 40.00 - 19 rds. - Federal Power Shok 145gr. Speer Grand Slam No message. Emails only!

categories:GunsSporting Goods

85661 impressions

2409 views

Magnificent rifle Antonio Zoli made in Italy. 30-06. With hard case, only used at the shooting range, 2- boxes.Bolt on the left side. In perfect condition, a magnificent beautiful wood . (New Hand forged knife. Skinner knife hardness 62. Handle Mammoth tusk blade Austrian steel Bohler. This is a bonus for those who buy AZ.).Browning carbon limited edition 7mm. Browning cenergy CX 12 gage. I would preferably want to sell everything together if the price would be higher separately. Super condition!!!! 9.9 from 10. All with boxes.

categories:GunsSporting Goods

153616 impressions

11753 views

Brand new-in-box Henry X Model Lever Action Rifle in .45 Colt, with a 17.4" barrel, side gate, and a 7-round capacity. Price is firm, no trades considered, and PAL verification is required. Prefer local transactions but can ship at the buyer’s expense.

categories:GunsSporting Goods

44550 impressions

1949 views

n-Restricted rifle Lee Enfield (Long Branch) NO 4 MK I* on-Restricted rifle Lee Enfield (Long Branch) model NO 4 MK |* .303 British Ten shot bolt action w/ bbl length 25" Blued barrel and receiver. Fixed front and adjustable flip up rear sight. Includes one detachable box magazine and sling. Full wood stock with metal butt plate. Matching serial number on receiver and bolt. Left side of receiver marked 1945. Fitted with less common two groove barrel. Mechanically appears to function reasonably well. Bluing worn in use and handling areas plus other use, handling and storage marks. serial # 88L7578 PAL required

categories:GunsSporting Goods

1376 impressions

82 views

British Pattern 1853 socket bayonet with leather scabbard and a frog This is a British M1853 Socket Bayonet for use with the Enfield, Snider, Martini rifles. This 1853 pattern was the standard bayonet carried by nearly every British infantryman of the mid-19th century and widely used during the Crimean War, Indian Mutiny, and in numerous colonial campaigns. Production of the1853 pattern socket bayonet continued throughout the life of the Enfield Muzzleloader and the Snider rifle and was finally terminated in 1875. The blade has a slight downward curve to allow easier reloading while fixed to the muzzle-loading Enfield rifle. Measuring 44 cm (17 inches), it features a triangular cross-section with fullers on all three sides, tapering to a narrow, down-turned point. Scabbard in good condition and includes a leather frog. The brass tip on the scabbard wiggles a bit but is still solidly attached. The scabbard is stamped W.D. (War Department) below the frog stud with the Broad Arrow symbol above the initials. The top of the blade at the base is stamped with an E over a crown over the number 25 Overall Length – with blade in scabbard - 21 3/4” Length of Bayonet – 20 5/8” Length of Grip including the Guard – 3 5/8” Blade Length – 17” $200.00 Thanks, Phil

categories:GunsSporting Goods

2224 impressions

60 views

Previous sale cancelled due to non payment.....Still 0ffering straight sided, paper patched ( .4035 to .4045 ) medium hardness 8/9 which were very accurate in my original 40-70 and 40-50 sharps rifles. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.  

categories:GunsSporting Goods

15087 impressions

699 views

**See below for specific box availability** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. Seeking various factory boxed cartridge ammunition trades for my 243 Win Factory Boxed Ammunition or cash prices are below. There’s a variety of brands and projectiles available. Looking for 6.5 Creedmoor, 270 Win and 300 Win Mag, I might consider 30-30 Win. This ammo is just a surplus calibre to me now and so trading off my left over ammunition. See pictures for more info. Available as detailed below: Full Boxes, 20rd count Winchester Super X, Power Point, 100gr, 11 boxes available $42ea *SOLD*Hornady Custom International Interlock SP, 100gr, 4 boxes available $42ea Federal Non Typical Whitetail SP, 100gr, 2 boxes available, $40ea Federal Power Shok SP, 100gr, 3 boxes available, $45ea Federal Power Shok Jacketed SP, 100gr, one box available, $45ea Hornady American Whitetail Interlock,  100gr, 2 boxes, $53ea Federal Power Shok SP, 80gr, 2 boxes available, $42ea Federal Premium ELD-X, 90gr, 2 boxes available, $65ea Winchester Varmit X, Polymer Tip Rapid Expansion, 58gr, 2 boxes available, $45ea Federal Premium V-Shok Nosler Ballistic Tip, 55gr, 2 boxes available, $45ea Partial Boxes *SOLD*Winchester Deer Season XP, 95gr, one box of 10rds, $25 *SOLD*PPU Rifleline Ammunition SP, 100gr, one box of 14rds, $23 Winchester Super X Power Point, 100gr, one box of 18rds, $37 **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Local only, Valid PAL required. First Paid, First Served. Holds only with deposit. Delivery Negotiable. 

categories:GunsSporting Goods

21911 impressions

1309 views

Hard to find especially in such excellent condition, bluing 99.9%, stock has a few surface minor dings but no cracks. Rifling clean bright and vivid. Drilled and tapped. 24 inch barrel, appears all original. Top feed. serial number 40425X, with "30" stamped in Left side nearest receiver. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:GunsSporting Goods

72011 impressions

2386 views

Fierce carbon rogue 300 win mag Aftermarket Threaded muzzlebreak (side exit not the factory radial break)  Pic rail for bi-pod mounting  Flush mounted Quick connect mounts in stock for sling 20moa Pic rail for scope  Mint rifle shoots fantastic, extremely low recoil  I shoot 1/2" groups and 220 yards with my hand loads (loaded ammo, ADG fire formed brass and Data can be worked into deal)  Scope and rings not included  Only selling to try a something else (rifles are my hobby and I just play with them and pass them down the line)  Shipping is available will ship in original  box and yes you need a PAL

categories:GunsSporting Goods

4571 impressions

315 views

British Pattern 1853 socket bayonet with leather scabbard This is a British M1853 Socket Bayonet for use with the Enfield, Snider, Martini rifles. This 1853 pattern was the standard bayonet carried by nearly every British infantryman of the mid-19th century and widely used during the Crimean War, Indian Mutiny, and in numerous colonial campaigns. Production of the1853 pattern socket bayonet continued throughout the life of the Enfield Muzzleloader and the Snider rifle and was finally terminated in 1875. The blade has a slight downward curve to allow easier reloading while fixed to the muzzle-loading Enfield rifle. Measuring 44 cm (17 inches), it features a triangular cross-section with fullers on all three sides, tapering to a narrow, down-turned point. The blade is in good solid condition but is badly tarnished. The scabbard is in fair condition. The bottom brass below the frog hook is pulled free from the leather scabbard. The brass tip on the scabbard wiggles a bit but is still solidly attached. The stitching on the scabbard in the last 3 ½” above the end cap is partially missing but the scabbard is solid and not separating. The scabbard is stamped W.D. (War Department) below the frog stud with the Broad Arrow symbol above the initials. This stamping is difficult to see. The top of the blade at the base is stamped with an E over a crown over the number 25 Overall Length – with blade in scabbard - 21 3/8” Length of Bayonet – 20 3/4” Length of Grip including the Guard – 3 5/8” Blade Length – 17 1/8” $125.00 Thanks, Phil

categories:GunsSporting Goods

636 impressions

33 views

Ojibway Style PomPom Snowshoes 11 x 54 They measure 11 inches across at the widest point and 54 inches in length. These are considered a Medium in size. Leather bindings Good Condition $75.00 or Best Offer. Thanks, Phil

categories:GunsSporting Goods

21492 impressions

594 views

Pre-WW1 British Pattern 1821 Canadian Artillery Officer's Sword – no Scabbard Savage and Lyman Montreal Sword This company name was used by the Montreal silversmiths Savage and Lyman between 1868-1878. The left side of the blade immediately in front of the guard Is marked Savage & Lyman Montreal Within the engraving on the left side is a Crown.  Believed to be indicative of Queen Victoria. The right side of the blade has a small brass insert which says PROOF.  Wilkinson Sword introduced these Proof Discs in 1844. In the engraving on the right side of the blade is the word ARTILLERY The guard is steel and has fish skin wire bound grips with most of the fish skin having been worn away.   Length of Sword – 40 1/2” Length of Grip including the Guard – 5 1/2” Blade Length – 34 1/2”   Savage & Lyman Montreal (or Savage & Lyman and Company) were manufacturers and suppliers of swords, known for military pattern swords like those for Canadian militia units (e.g., 1st Battalion Chasseurs Canadiens), marking them as producers/sellers, though like many firms, they likely had blades forged elsewhere (perhaps by specialists like J. Martin in Montreal) and then finished, hilted, proofed, and sold by Savage & Lyman in Montreal, a common practice for armsmakers then.  Key Points: Evidence of Manufacturing: Swords clearly marked "SAVAGE & LYMAN MONTREAL" exist in museum collections, showing they were a recognized name in arms. Role: They functioned as an arms dealer and supplier, customizing and selling weapons for Canadian military and militia. Production vs. Supply: While they might not have forged every single blade from raw steel in-house, they were responsible for the final product, including proofing and adding their own markings, as seen on a 1885 Chasseurs Canadiens sword. In short, they were a key player in the Montreal arms trade, making/selling quality military swords, even if blade forging was sometimes outsourced to other specialized smiths.    $500.00 Or Best Offer   Thanks,  Phil

categories:GunsSporting Goods

6961 impressions

195 views

DUPLEX RETICLE, 1" TUBE, SIDE FOCUS ADJUSTMENT, CLICK ADJUSTMENTS, WITH RINGS LENS COVERS AND FULL MANUAL, MISSING ADJUSTMENT COVERS, CLEAR BRIGHT SHARP VG-EXC CONDITION

categories:GunsSporting Goods

7783 impressions

246 views

Pelican Protective Case with Foam (New/ Uncut) and Castor Wheels (with locks) Dimensions: 24 1/8 " x 47 5/8 x 17 3/4 The set up retails for around $2600 Plus Taxes Will consider trades preferably for Browning Citori 725, Citori 825, Beretta 686, Beretta 694, Vortex Razor or Leupold LVPOs/ Scope. Will add cash on top. Can work on shipping

categories:GunsSporting Goods

51243 impressions

993 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

16200 impressions

478 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

14097 impressions

354 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

25595 impressions

891 views

Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1940” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1940” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Rarity of the early 1940 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.

categories:GunsSporting Goods

9171 impressions

165 views

Cal. 303 Brit. S# 94L8460. Bbl. 25 1/2”. Blade front sight with protective ears. MK3 ladder aperture rear sight graduated to 1200m. Mismatched numbers. Left side of the receiver is marked with No. 4 MKI*, Long Branch, and 1950 markings. Arsenal rework Suncoirte finish. Hardwood stock with grooves set with bottom-mounted sling swivels and canvas marked sling. MAG. one 10-rd. CONDITION: stock set has a darkened appearance with a few light, scattered dings, scratches, and handling wear. Metal shows overall fading to gray with a Suncorite and finish. Action functions properly when hand-cycled. Very good to excellent bore. Spiked Bayonet and metal scabbard can be added for an extra $50 Can ship anywhere in Canada, Please my other ads for rare and collectable firearms and accessories.

categories:GunsSporting Goods

51676 impressions

1938 views