The rifle is like new, only fired once. Great if you want to experience shooting something old school and atypical of the current cartridge firearms. This rifle doesn’t love the CCI musket caps so sourcing some of the stronger Scheutzen or equivalent would be ideal.  Comes with the manual, rifle and Pedersoli box.  Price is firm, shipping extra. Local pickup available near Wainwright, AB. For local sale, I can include several hundred 58 cal round balls for a little extra.   No trades. 

categories:Sporting GoodsGuns

4670 impressions

233 views

New in box 300 Win Weatherby Meateater series in a 26" barrel. 3+1 Mag capacity. 7.15 pounds. 1:10" Twist Rate. Lightweight and effective The Vanguard MeatEater Edition is the culmination of in-field experience, trends, and MeatEater’s personal touches rolled into a collaboration between two top brands in the outdoor industry. Full Tungsten Cerakote® finish on barreled action to prevent corrosion while accenting the spiral fluted #2 contour barrel. Lightweight and effective, the Vanguard MeatEater Edition features a unique color pattern that highlights the current trends of gray and brown accents on a black stock base. The black Cerakote® fluted bolt matches the MeatEater logo located on the floorplate. The 1/2x28tpi threaded barrel with included seamless thread protector gives options for future Accubrake ST or suppressor installation.

categories:Sporting GoodsGuns

10442 impressions

694 views

Beautiful condition and very accurate with 168 grain Barnes TTSX handlaods (sob moa). The stock has been modified from factory. Length of pull has been shortened to 13.5" and European style cheek weld professionally sanded flat. Nice compact rifle with open sights (installed) and a threaded 20" barrel. Comes as a package with a Bushnell Prime 4-12x40 scope installed and sighted in. With the current Canada Post debacle I will drive a reasonable distance around Medicine Hat for a face to face deal.

categories:Sporting GoodsGuns

6359 impressions

307 views

Various Glock slides back in stock! Visit our website to take a look at the current selection - www.partsonly.ca Please note: proof of RPAL required at checkout when you order Direct link to Glock slides - https://partsonly.ca/product-category/glockplatform/glockslidesupparts/ You can email us at info@partsonly.ca or message us through townpost to inquire! Thanks for looking

categories:Sporting GoodsGuns

40484 impressions

4380 views

Chambered in 300 Win Mag Comes with upgraded 6x24x50 FFP optic and over $550 in ammunition (8 boxes) Cabela’s is currently selling the same rifle chambered in a .308 for over $1200 Will consider trades - Send me what you have and maybe it’ll work out! FCFS - No Holds Located in Northwest Calgary

categories:Sporting GoodsGuns

28416 impressions

2494 views

Selling my 25 gun safe, purchased from cabelas in 2015. (Rebranded liberty safe) Few dings in the paint from moving the safe, currently empty in my garage and need the space. Door still functions flawlessly, have to re install some interior panels before I update the photo in the add.

categories:Sporting GoodsGuns

4669 impressions

626 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

3171 impressions

520 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2869 impressions

419 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2899 impressions

502 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

4312 impressions

498 views

Howdy Townpost. I'm selling some of my tin hoard. All of these ingots were cast from pewter mugs, plates, cups, candleholders etc. I included a few pictures of examples I melted into ingots. I'm currently asking $30/lb. The ingots are in Calgary, AB for local sales or shipped anywhere nationwide on buyer's dime (I can do flat rate $20 for up to 11lbs).

categories:Sporting GoodsGuns

25775 impressions

1376 views

First Gen weatherby vanguard badlands edition in 270 win. Bought it thinking id like the internal magazine and Im just not a fan. Bought for 1300 plus the scope rail was 100. Has 24 inch barrel, full cerakote bronze everything. Asking 1000 for it. Willing to consider trades for a 6.5 cm Just received a 10 round detachable magazine kit for it, currently installed. With the magazine kit id ask 1100. Without, would be the listed 1000

categories:Sporting GoodsGuns

7936 impressions

536 views

For sale is a Weatherby Vanguard in 7mm Rem with Burris Fullfield 3-12x56 (Illuminated) with PLEX reticle. This is the burnt bronze edition. 24'' barrel, 7lbs. Has been an excellent rifle, but i recently got myself a Weatherby MarkV as i needed something a little lighter for my shoulder. Rifle is in excellent condition, cerakote has no blemishes or scratches and the monte carlo stock has no signs of wear or damage. Always cleaned and stored properly. Only two boxes of Barnes through the rifle and was mostly at the range besides the one round used while hunting this last season. Two stage trigger, currently set at the lowest 2.5lb pull. If you have ever owned a Weatherby before, you know they don't lie about the guaranteed 100yrd sub MOA out of the box. I went from a Browning to Weatherby and i will never go back. Looking to sell, not interested in trades. Will not ship. Willing to deliver or meet WITHIN REASON central Alberta. Valid PAL and transfer documentation with RCMP is mandatory and i will not budge on that.

categories:Sporting GoodsGuns

18405 impressions

1262 views

Completely untouched. These have been sitting around for a year in my safe. Selling all for $420 which is 10% lower than you can currently find in the retail market. Must have PAL. Text or call at (587) 966-8996

categories:Guns

2745 impressions

169 views

Savage 25 Lightweight Varminter 17 Hornet. 24" Barrel. Laminate Stock. Glass Bedded. Asking $1000.00 firm. Exceptionally accurate with both factory 20gr VMAX loads and my reloads with same bullet and CFE BLK powder. I have Hornady Dies, Fired and new brass. Bullets. These will be sold at an additional price if interested or AFTER the rifle is gone. ~ I will not sell these unless the rifle is taken. We can work-up a deal if you want components together with rifle (~200 fired cases + 100 new brass, ~150 20gr bullets, some loaded ammo factory and reloads) Local sale in Calgary; prefer no shipping - especially if bought with bullets). PAL is a must and will be verified online as per current legislation prior to the transfer. Text or call - preferred communication. Please no PMs on townppost as I am away from the computer most of the time.

categories:Sporting GoodsGuns

5271 impressions

651 views

Henry's mares leg chambered in 357 low round count and have 2 stocks the origanal and the big boy stock on it currently . You can actually shoulder the gun .

categories:Sporting GoodsGuns

3659 impressions

343 views

Howdy Townpost. I've got a number of these brand new Allen slings for sale. The slings I have here are an improvement over the regular Allen Endura. This batch of slings has cam buckles (sometimes called toggle clips) instead of tri-glides. They're easier to use and make attaching the webbing loops to sling swivels really quick and easy. The sling loop sections are longer and could even be used as a carry strap for small logs or something heavy in a pinch. The slings can be adjusted from 28" to 52" so they're quite versatile. The slings are $5 each. I'm currently offering a buy 3 get 1 free deal. The slings are located in SW Calgary and can be picked up almost anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping these as regular or expedited parcels should be fairly cheap since I can roll up the sling into a little roll and put it into a very small box or mailer. I may be able to ship this as an oversized lettermail if I fold one or two slings flat and get them into a large envelope too. So I expect shipping to be $5-19 depending on what option you go with, where the is the package destination and how many slings you want.

categories:Sporting GoodsGuns

21544 impressions

561 views

4037146542 Ashley doucette and 5877860051 gerry. Sold me this gun and some reloading stuff.. I paid for it but never got a tracking number after being promised he'd send one as of Thursday. Today I called again with a different number and the gun was still available. She currently is trying to another gun on town post.. they're from grande Prarie

categories:Sporting GoodsGuns

10338 impressions

1100 views

Up for grabs reluctantly, is my Rossi Ranch Hand chambered in .44 magnum as I honestly just don’t use it at all. These guns are near unobtainable in Canada currently (Discontinued as well) especially in .44 mag. The rifle is in as new condition as you could hope to get without being in the box brand new. Located in olds for local pick up but willing to ship on buyers dime. Looking for $1950 cash or e-transfer. Text is best to reach me 4035079555.

categories:Sporting GoodsGuns

342 impressions

28 views

Unfired, 12G girsan mc312 Comes with full choke kit, +2 Tube extension, however currently plugged to 2 (3 inch shells) in the tube and one in chamber as regulations for hunting. Comes with QD for sling and ris rail. Has minor safe kisses from the store.

categories:Sporting GoodsGuns

1484 impressions

225 views

Hello everyone. I have for sale a Savage 10 Law Enforcement Edition in .308 that has been my go-to hunting rifle for the last 3 years. It has a cheek riser, directional muzzle break, 24 in heavy fluted barrel, 20 MOA rail, long range scope with heavy duty hand lapped rings, 2 proprietary Savage magazines,an extra rubber butt pad to reduce recoil even more, 3 position safety and tactical bolt knob. The stock is with the bedded aluminum chassis for rigidity and precision. The AccuTrigger is adjusted at 2 lb. This is a very very accurate rifle. Here are some bullets tested with a 3 shot group at 100 yards: Sako powerhead blade 162 gr - 0.4 in Herters soft point 150 gr -0.45 in Federal berger hybrid hunter 168 gr - 0.48 in Sellier & Bellot soft point 180 gr - 0.48 in Norma soft point 150 gr - 0.74 in Sako superhammerhead 180 gr - 0.8 in Did load development for it with Barnes TTSX 130 gr and obtained 0.35 in at 100 yards . The scope is a SKW Optics 5x30x56 FFP in 0.5 MIL/click. The scope is high quality and tracks well. It s a 34 mm tube with lots of internal adjustment. It comes with everything already done and researched. You don t have to do anything.The rifle was $900 ,scope was $700 muzzle break $100 ,butt stock pad $40, scope rings $100,scope rings handlapping $50, extra magazine $100,trigger adjustment $50. The rifle is ready to shoot. Doesn't need anything. About 300 rounds through it. Currently sighted at 300 yards. Sold as a package since the scope rings are hand lapped for this rifle. No lowballers. Gun case not sold with the rifle. Willing to ship at owner's expense about $70. Thanks 

categories:Sporting GoodsGuns

39655 impressions

1648 views