Just in time for Christmas , Overall, the condition of this model eight is in good to very good condition. The pictures hopefully speak for themselves. No cracked wood. Everything appears to function as it should. Serial Number: 40571 on receiver and 40571 on the band in front of receiver. *I also have ammunition that can be purchased and shipped separately at additional cost If needed. Can ship anywhere in Canada, Please see my other ads for collectible, firearms, and accessories.

categories:GunsSporting Goods

32206 impressions

856 views

Cal. 303 Brit. S# 94L8460. Bbl. 25 1/2”. Blade front sight with protective ears. MK3 ladder aperture rear sight graduated to 1200m. Mismatched numbers. Left side of the receiver is marked with No. 4 MKI*, Long Branch, and 1950 markings. Arsenal rework Suncoirte finish. Hardwood stock with grooves set with bottom-mounted sling swivels and canvas marked sling. MAG. one 10-rd. CONDITION: stock set has a darkened appearance with a few light, scattered dings, scratches, and handling wear. Metal shows overall fading to gray with a Suncorite and finish. Action functions properly when hand-cycled. Very good to excellent bore. Spiked Bayonet and metal scabbard can be added for an extra $50 Can ship anywhere in Canada, Please my other ads for rare and collectable firearms and accessories.

categories:GunsSporting Goods

40793 impressions

1506 views

Wow look at this find! I would say in pretty good condition overall 8+ out of 10 with very few bumps and bruises for its age but no crack stock, Rifling looks very present as well. Comes with original canvas carrying case as well as seen in the pictures. Can ship anywhere in Canada please see my other ads for rare and collectable rifles and accessories,

categories:GunsSporting Goods

40741 impressions

1194 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5141 impressions

172 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5238 impressions

147 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11648 impressions

520 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6617 impressions

241 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

9889 impressions

640 views

This is an Antique Harpers Ferry U.S. Model 1842 Smoothbore Percussion Musket. The overall length is 57-3/4” with a 42” long barrel and coming in at just under 10 pounds. This is a .69 caliber musket. These were designed in 1842 and were produced from 1844 to 1855, with this one being made in 1849. There is a partially visible eagle over US forward of the hammer. Rear of the hammer is the markings HARPERS FERRY 1849. Inspection marks can be found on the barrel near the breech and on the trigger guard. Overall condition is very good with a low amount of handling dings and a small crack in the wood by the butt plate. Mechanically in excellent condition with a strong action. The Model 1842 was the first U.S. musket to be produced with a percussion lock. It had an effective range of 100-300 yards and a maximum range of 400 yards. The 1842 was the last U.S. regulation .69 caliber musket. Many of these muskets later had the bores rifled and saw service in the American Civil War. This would make a great addition to any antique collection of would even be suited as a stand alone piece. This is an antique so no PAL is required for purchase. Buyer must be 18 or older and able to prove it. Shipping is available at buyers expense. All used firearms should be inspected by a competent gunsmith prior to any form of use.

categories:GunsSporting Goods

18366 impressions

1011 views

Winchester Model 1894 Lever Action 38-55. Date 1909 The stock was varnished at some point. The wood on forearm and butt stock is very good with just some minor bangs from use. Original curved steel recoil butt plate is in place. The bluing on barrel, magazine and lever is approximately 75% and the receiver is < 10%. The metal is good but has some minor scratches, etc. and evidence of minor surface rusting. The non-load side of the received looks like course steel wool was used on it. Buck horn sights are in excellent condition and period correct. The barrel is 26” with a full magazine, and the muzzle looks good. Bore is polished & shiny and shows very minor past corrosion, probably from black powder use. Rifling is in good condition. Screws have been used but are in very good condition. All lettering and the serial number are crisp and clear. Operationally everything checks out. The trigger is good. The firing pin extends out when pushed, The cartridge lifter works well and the ejector is tight. Spring on loading port is tight. Half cock safety works and hold when bumped, when at full cock or fire ready the hammer does not fall when bumped. Overall, this firearm is graded as good. A good addition to any collection. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:GunsSporting Goods

8007 impressions

649 views

Winchester Model 1894 Ref #1041. Early five digit serial number. Dated 1897. This Winchester is a lever action, sporting rifle, octagon barrel, full mag. Dated 1897 Stock is excellent, appears original. A few marks. Original metal recoil pad fits well. Barrel is 26” long with sights intact. The read sights are intact and appear original. Bore is very nice, no obvious corrosion, does not appear to have ever seen black powder. Rifling throughout. Bluing is 40-50%. There are bumps and scratches on metal expected on a plus 125-year-old firearm. The drivers side receiver has a few light scratches and bangs. Screws have been used but are still usable. There is one on the loading port side that may have been a replacement. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident and protrudes when pushed on. Ejector is intact and tight, and magazine follower functions correctly.  Overall, I grade this firearm as good and should be fully functional. I don’t see many from this time frame with bores looking this good. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:GunsSporting Goods

12715 impressions

900 views

Winchester Model 1894 Lever Action 32-40 Ref #1043 This firearm comes with a Winchester letter indicating it was originally an Octagon barrel, it has however been rebarreled to a round barrel which is marked Model 94. The action is a Model 1894. The butt stock is near perfect, the forend has two hairline cracks that had been professionally repaired at one time, probably when rebarreled. The finish is period correct. Original curved steel recoil butt plate is in place. The bluing on barrel, magazine and lever is approximately 75% and the receiver is 20%. Barrel is 26” with a 2/3 magazine, and the muzzle looks excellent. The metal is excellent with no dings, scratches, etc. There is no rust or corrosion evident. A few rub marks on the right side of action. Sights are in excellent condition and period correct. Bore is clean and does not appear to have seen black powder, there is no corrosion, it’s nice and shiney, with rifling in good condition. Screws have been used but are in very good condition. All lettering and the serial number are crisp and clear. Operationally everything checks out. The trigger is good. The firing pin extends out when pushed, The cartridge lifter works well and the ejector is tight. Spring on loading port is tight. Half cock safety works and hold when bumped, when at full cock or fire ready the hammer does not fall when bumped. Overall, this firearm is graded as a shooter due to being rebarreled, but it is in good condition and a good addition to any collection. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:GunsSporting Goods

17243 impressions

1368 views

Weatherby XXII 22 lr,original made in Italy, c/w with Weatherby Supreme 3-9X scope with Duplex rectilcle. Some handling marks, overall in very good shooting condition.. Asking $1750 or best reasonable offer, shipping available by purchaser. Serious inquiries only, NO trades, located in Lloydminster, Ab Call/text 780 808 9777 anytime

categories:GunsSporting Goods

8898 impressions

724 views

Winchester Model 1895 30-40 Krag Ref #1047 This Winchester is a lever action, sporting rifle, round barrel, shotgun style rear stock. Dated 1903. Stock is in good shape, forend has a few chips missing next to metal, the rear stock is excellent, finish is period correct. Original metal recoil pad fits well. Barrel is 28” long with period sights intact. Bore is nice and clean with minimal to no corrosion, excellent rifling top to bottom. Bluing appears original and app. 20% throughout. There are very few minor scratches on metal. Screws are mostly unused, one does appear to have seen a screwdriver but is in very good shape. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident. Ejector is intact and tight, and magazine follower is correct. Overall, I grade this firearm as very good and should be fully functional. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:GunsSporting Goods

15555 impressions

580 views

Winchester Model 1894 38-55 Ref #1040 This Winchester is a lever action, sporting rifle, octagon barrel, full mag. Dated 1895 Stock is very good – good. Small tang crack 1” long, and a minor chip gone at tang. Forearm has an app. 2” crack and a few very minor cracks. The stock has typical bang marks. Finish appears original or period correct. Original metal recoil pad fits well. Barrel is 26” long with sights intact, rear sight may have been replaced at one time, again period correct. Bore has black powder corrosion but it’s clean now and has rifling top to bottom. Bluing appears original and app. 75-85% throughout. There are bumps and scratches on metal and evidence of minor surface rusting. Screws have been used, but in very good shape. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident and protrudes when pushed on. Ejector is intact and tight, and magazine follower functions correctly. Overall, I grade this firearm as very good and should be fully functional. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:GunsSporting Goods

18786 impressions

615 views

Winchester Lever Action Repeating Rifle, .38-40 WCF, mfg. 1890. This is a good honest original ‘73 fresh out of a very old local collection. Standard length 24" octagon barrel retains it’s original dovetailed blade front sight and adjustable buckhorn rear. The metal has a mottled dark gray patina overall with some traces of original bluing remaining within protected areas around the sideplates, trigger, and along the dust cover rail. Sharp edges with generally smooth surfaces throughout. Some very light surface oxidation spotting forming toward the muzzle. The stock retains about 40% factory varnish with the balance worn to a pleasing dark untouched patina. Tight wood-to-metal fit with moderate wear overall and a just really honest, unmolested appearance. There is some very minor chipping along the edges of the butt and a super tight old 1" hairline crack at the front left side of the forearm. Original hammer, trigger, lever & locking nut, loading gate, dust cover, buttplate with trapdoor compartment (cleaning rod absent), forend cap, and magazine tube & band. Screws appear to be original. Crystal clear original barrel address, caliber marking, model designation, and serial number "336159" on lower tang. Action is very smooth, crisp, and secure and functions perfectly. Rifling is worn and pitted at the very tip of the muzzle but otherwise the bore shows good rifling overall with moderate/heavy blackpowder frosting and pinprick pitting scattered throughout. A very solid original '73 Winchester with a great Western look..

categories:GunsSporting Goods

6347 impressions

94 views

Gun is in overall good shape, missing lock piece for action. Needs a good cleaning Very rare gun Open to reasonable offers Text or email for more details **SALE PENDING**

categories:GunsSporting Goods

8317 impressions

940 views

Howdy Townpost. I have a really interesting piece for you here. This is a conversion of a conversion rifle. This is a German made Ludwig Loewe Gew 88 that was later converted by the Germans into a Gew 88/05 and most likely given to the Ottomans in WWI as war aid. Many of these were retained and later converted in the 1930's to a Mauser 1935 pattern type rifle. They converted a large portion of their arsenal to this pattern including SMLE's a plethora of their different Mausers, and Gew 88's they had in inventory. This rifle was rebarreled to shoot the modern 8mm Mauser cartridge and re-stocked into a more Mauser-esq stock. This stock features Mauser bolt disassembly disks despite them not being required for the Gew 88 action. The stock on this particular example had a fairly large wood defect that the Turks neglected to address has been fixed. It was cleaned out and filled with Brownells Acraglas epoxy so it's rock solid now. The overall condition is good. The stock was professionally refinished. The bore is excellent, very sharp and clean rifling. The rifle is located in Calgary AB for pickup or I can ship it nationwide on the buyer's dime. PAL will be verified as per C-71

categories:GunsSporting Goods

7068 impressions

513 views