Winchester 25 in Alberta

Browse ammo, gun accessories, parts, as well as new and used non-restricted and restricted firearms for sale in Alberta.

Popular search terms:

Photo of Winchester 1894 & (pre 64) Model 94 - Sights, Parts, ......
$40.00
Winchester 1894 & (pre 64) Model 94 - Sights, Parts, ......
1) Winchester pre 64 M94 - Carbine Blade Gold Beaded Insert - $95.00 2) Winchester pre 64 Model 94 - Front Sight Hood - $40.00 3) Winchester pre 64 Model 94 - Front Sight Beaded Insert - $75.00 4) Winchester pre 64 Model 94 - 22B Rear Sight - $350.00 6) Older Original 1A - 1B - 1C Elevators - $60.00 7) Winchester pre 64 Model 94 - 22G Rear Sight - $250.00 8) Winchester Model 94 - Rear Sight 3C - 6 Step Elevator - $50.00 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 12) Winchester 1873 - 1892 Saddle Ring Staple (only) - $65.00 Screws 14) 6-48 Filler Screws (4) - Blue   $20.00 15) Win 1890-06-62 Tang Screw  - 40.00 16) Win 1894-1892-1873 PG Tang Screw - 60.00 17) Win 1876-1886 Tang Screw  -  40.00 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 21) Win 1894 (pre 64) Magazine Plug Screw Long -   35.00 22) Win 1894 (pre 64) Finger lever pin stop screw - 40.00 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 24) Win 1894 (pre 64) Loading gate screw - 40.00 26) Win 1892 -1894 Forend Cap Screw (2) -  45.00 27) Win 1892 -1894 SRC Front Band Screw  - 40.00 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 29) Win 1885 Low Wall Tang Screw - 40.00 30) Win 1885 High Wall Tang Screw - 40.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads
categories:GunsSporting Goods
117953 impressions
7538 views
Lacombe, AB1 day ago
Photo of Hard to Find  -  Rear Sight Elevators - Lifters - Risers + Front Sight Hoods
$20.00
Hard to Find - Rear Sight Elevators - Lifters - Risers + Front Sight Hoods
2) Ithaca High Standard Elevator - .850" W x 1.00" L - $30 3) Elevator X - .104" W x 0.89" L - OAL = 1.65" - $35 4) Cooey Elevator - .075" x 1.21" - $15 5) Husqvarna Elevator - $45 6) Marble Double Step - Rifle Elevator - $35 7) Marble Double Step - Carbine Elevator - $35 8) Marlin Elevator M1 - Marlin S-25 Sight - .046" W x 1.60" L - $35 9) Marlin Elevator M2 - Marlin S-25 Sight - .055" W x 1.60" L - $35 10) Marlin Elevator (336 - 1894 - 1895) - .115"W x 1.43"L - SOLD 11) Marlin Early Fishhook Elevator- .075" W x 1.22" L - $35 12) Marlin Elevator - Marlin S-27 Sight - .095" W x 1.15" L - SOLD 14) Remington 98 1/2 Sight - 105 Elevator - Round Barrel Model 12 Rifles - $45 15) Remington "R" Elevator (701 1/2) - .057" W x 1.11" L - SOLD 16) Savage Folding Sight Elevator - .061" W x 1.13" L - $40 17) Savage Fishhook Elevator - $40 18) Savage 1899 Elevator - .095" W x 1.05" L - OAL = 1.27" - SOLD 19) Savage 99 Elevator - .095" W x 1.15" Lo - $40 21) Savage 24 Elevator (Replacement Style) - $25 22) Win Early Elevator - $40 23) Winchester 1A Elevator - dated (.207") - $60 24) Winchester 1B Elevator - dated (.162") - $60 25) Winchester 1C Elevator - no date (.175") - $60 28) Win 2C Elevator - .60"W x 1.625"L - $35 29) Winchester 3C - 6S Elevator - $50 - 31) 6-48 Filler Screws (4) - Blue $20.00 32) 6-48 Pan Head Filler Screws (4) - Blue $20.00 33) 6-48 Filler Screws (4) - Stainless $20.00 34) 8-40 Pan Head Filler Screws (2) $20.00 35) DT-1 - 3/8" DT Filler - Blue - Curved Top - $45.00 36) DT-2 - 3/8" DT Filler - Stainless - Curved Top - $50.00 - 40) Husqvarna Front Sight Hood - $85 41) Marlin pre 72 Round Front Sight Hood - $45 42) Marlin post 72 Front Sight Hood - $60 43) Sako - Finnwolf Hood - $85 44) Browning (Japan) BLR - BAR Front Sight Hood - SOLD 45) Parker Hale Front Sight Hood - $85 46) Browning (Belgium) Safari Front Sight Hood - $85 47) Winchester Model 9422 Front Sight Hood - $40 48) Winchester post 64 Model 94 Front Sight Hood - $40 49) Winchester pre 64 Model 94 Front Sight Hood - $40 50) Winchester Model 70-88-100-64-65 Front Sight Hood - $40 51) Winchester post 64 Model 70 Front Sight Hood - $75 52) Winchester post 64 Model 70 Front Sight Hood (Long) - $85 53) Winchester (97 Sight - Model 69) Front Sight Hood - $75 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads
categories:GunsSporting Goods
175568 impressions
2613 views
Lacombe, AB2 days ago
Photo of Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
$4750
Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.
categories:GunsSporting Goods
11648 impressions
520 views
Calgary, AB4 days ago
Photo of Winchester Model 94 125th Anniversary High Grade Rifle 30-30 Win
$3200
Winchester Model 94 125th Anniversary High Grade Rifle 30-30 Win
Winchester Model 94 125th Anniversary High Grade Rifle 30-30 Win Brand new in box. Factory fired only. 24 inch barrel. Special Limited Edition - Celebrate by giving your self the greatest lever action in history. Hand-chased engraved, nickel finish receiver, gloss blued, button rifled, full octagon barrel, grade III/IV Walnut, spade checkering It is really quite remarkable what can be accomplished by an artist when working with a Model 94 Winchester canvas. Compelling? Remarkable? Classic? Exquisite? Timeless? Mysterious? The answer is all of the above. The best and most revered lever action of all time can be yours in a special 125th Anniversary High Grade version. Let's face it, you missed your chance to buy one in 1894, but there is still time to get a new one of these very special rifles. Very limited numbers remain. RECEIVER – Steel; Nickel finish; Hand-chased engraving on both side of the receiver; Drilled and tapped for scope mounts BARREL – Gloss blued finish; Button rifled, Full octagon; Special barrel marking ACTION – Lever-action; Top tang safety STOCK – Grade III/IV Walnut; Spade checkering FEATURES – Drilled and tapped hammer for hammer spur extension (included) Pal is a must and will be verified. No trades, thanks. Price is firm. Shipping is only available on buyers expense. Serious inquires only please.
categories:GunsSporting Goods
70949 impressions
1572 views
Stony Plain, AB4 days ago
Location
Find places in Alberta within
of
auction, garage sale, or moving sale

Having a garage, estate, or yard sale?

Create an ad event to promote an auction, garage sale, or moving sale.

Item Type
Firearms57Ammunition27Parts4
Gun Type
Rifle10Handgun8Shotgun5Other5
Action
Bolt22Lever21Semi-automatic6Revolver5Pump3Double-barreled1Single-shot1
Caliber