For sale (Open to Trades) — Remington XCR II Key details Condition: Very good / fully functional — no issues. Receiver stamped 721. Re-barreled by first owner with a stainless steel barrel. Stock bedded for improved accuracy and consistency. Action: Remington (renowned reliability). Finish: XCR II features TriNitride coating — an extremely durable, high-performance surface treatment. Performance Fired at Genesee Range (Alberta): was able to hit steel at 500 m using a Bushnell 3–12×40 scope and Federal 150 gr / 180 gr ammunition. Functions reliably and as intended. Sale terms Local sale preferred. Shipping at buyer’s expense (buyer is responsible for transfer compliance). Open to trades — especially rifles in other calibres (this is surplus to my need) Notes XCR = Xtreme Condition Rifle.

categories:GunsSporting Goods

37755 impressions

2013 views

Introducing an innovative solution for mounting optics to your pistol slide: The Versa Tactical SIGHTSECURE dovetail mount. Available for Beretta and for Glock. To purchase, head to this link: https://partsonly.ca/product/glock-dovetail-optic-mounting-kit/ This system allows the user to install an optic on a slide that does not have an optic cut. Made of a solid piece of 4340 steel, this mount will not bend or break. Has been extensively field tested with thousands of rounds fired. There are no moving parts, latches or other components to wear/break. Simply slide the Versa Tactical mount in the slot where your factory rear sight goes, and install the 2 expander screws. Then your optic is ready to go on! This mount allows for mounting of any industry standard RMR footprint optic. We recommend using a small amount of blue loctite for installation of all the hardware. Ensure the expander screws are inserted until flush and snug, but do not over-tighten! We recommend tightening of the optic mounting screws to either 14in-lbs or to your optic manufacturer's specification, whichever is lower. The Glock mount is compatible with the following models: 9mm – G17,G19,G26,G34,G45 10mm Auto – G20,G29 .357 – G31,G32,G33 .40 SW – G22,G23,G24,G27,G35 .45 G.A.P. – G37,G38, G39 .45 Auto – G21,G30,G36,G41 This Glock dovetail optic mounting kit will not fit and is not suitable for the Glock MOS models! The Beretta mount is compatible with the following models: M9 M9 Exclusive M9A1 M9A3 M9A3 Black M9 22lr 92 Fusion Black 92 Fusion Blue 92 A1 92 Compact 92 Compact w/ Rail 92 Compact with Rail Inox 92 Vertec Inox 92FS 92FS Fusion 92FS Inox 92FS Brigadier 92FS Brigadier Inox 92G 92G-SD 92G Elite 92X Centurion 92X Compact 92X Compact w/ Rail 92X Full Size 98A1 98FS 98FS Inox 90 Series Inox This mounting kit will not fit and is not suitable for the following Beretta models (including but not limited to): ANY Beretta Optics Ready Models 92FS Centennial 92 Performance 92 Performance Defensive 92 RDO Compact M9A4 Centurion Taurus 92 Color: Black Material: 4340 Steel Kit includes: 1x Versa Tactical SightSecure™ optic mounting plate for rear sight dovetail 2x Expander screws 2x Optic retention screws 1x HEX driver

categories:GunsSporting Goods

21100 impressions

997 views

Once fired mixed head stamped 308 brass. Asking $40 Reasonble offer considered. Text 780-243-1911

categories:GunsSporting Goods

2145 impressions

139 views

32-40 Win - 170g PP - "Duke" Head Stamped - John Wayne - Limited Edition Winchester Ammunition 1 Box Available $275.00 --- Shipping can be arranged - Send full Address with Postal Code --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

23609 impressions

659 views

NEW TO CANADA The PB-223 is a non restricted semi automatic rifle chambered in 223. Using commonly available Ar15 pattern magazines, this is a must have for someone in the shooting sports. This is a brand new, unfired, in the box rifle. Multiple units/bulk pricing available The rifle has a top picatinny rail for mounting optics. The rifle does not come with sights but with the purchase of this rifle I will give you 40% off any in-stock optic that I sell on townpost or my website (specterarms.ca). The barrel is threaded 1/2x28 and comes with a free pepper-pot style muzzle break. But if you prefer the popular S8 or S9 linear compensator, I can sell you one of those for a sale price of $75 (reg $95) The version I sell, has an adjustable stock and pistol grip installed allowing your rifle to comfortably fit all body types. Did I mention it is non-restricted? It not only meets the criteria for a non restricted firearm (as laid out in section 84 of the criminal code), it also has been deemed non-restricted by the RCMP. They even issued it a non-res FRT number. This is NOT the Australian version. Shipping available at actual cost or pick up in SE Edmonton. PAL must be verified before any viewing, purchase or shipping. To verify: I will need your PAL number, date of birth and the email you have on file with the Canada firearms center. If you become evasive when I try to verify your firearms license, I will discontinue communicating with you; it is the law. When inquiring about shipping, please send your postal code. I can take multiple payment types, cash, credit card or EMT. WARNING: messages sent through townpost are not getting through. Please email me directly or text me.

categories:GunsSporting Goods

52246 impressions

1655 views

1) Husqvarna Rear Sight Ramp & Elevator - $145.00 2) Husqvarna Elevator - $45.00 3) Husqvarna Front Sight Hood - SOLD 5) 6-48 Filler Screws (4) - Blue $20.00 6) 6-48 Pan Head Filler Screws (4) - Blue $20.00 7) 6-48 Filler Screws (4) - Stainless $20.00 8) 8-40 Pan Head Filler Screws (2) $20.00 9) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

56919 impressions

2951 views

1) Savage 99 - Front Sight - Bronze - $110.00 4) Savage 1899 Rear Sight (FT) & Elevator (98%) (Stamped Pat Pend) - $165.00 6) Savage 99 Rear Sight (Early FT) & Elevator (95%) - $135.00 7) Savage 99 Rear Sight (Later FT) & Elevator (95%) - $145.00 8) Savage 99 Rear Sight (Semi- Buckhorn) & Elevator (95%) - $165.00 9) Savage Folding Rear Sight & Elevator - $145.00 10) Savage Flat Top Rear Sight (Reproduction) & Elevator - $75.00 13) Savage 25B Windgage Rear Sight (some pitting) - $90.00 14) Savage Folding Rear Sight & Elevator - $145.00 16) Savage 99 Rear Sight Elevator - $40.00 17) Savage 1899 Rear Sight Fishhook Elevator - $40.00 20) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 21) 8-40 Pan Head Filler Screws (2) - Blue - $20.00 22) 3/8" DT Filler - Curved Top - $40.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

74670 impressions

4295 views

1) Marlin S-25 Rear Sight & Elevator  -  $125.00  2) Marlin S-25 Rear Sight & Elevator - Stepped  -  $145.00 3) Marlin 39 (post 72) Folding Rear Sight & Elevator  -  $170.00 4) Marlin Front Sight Ramp (0.7" C-C) with Screws  -  $85.00 5) Marlin Front Sight Ramp Insert - (298")  -  $75.00 6) Marlin Hood (1972 to Present Day)  -  $60.00 7) Marlin Hood (pre 1972 Rifles)  -  $45.00 8) Marlin Bullseye Stock Inlay  -  $35.00 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45 10) 8-40 Pan Head Filler Screws (2) - Blue  -  $20.00 11) 6-48 Pan Head Filler Screws (2) - Blue  -  $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

44183 impressions

1483 views

Selling a brand-new, never-fired Savage Impulse Big Game rifle, still in the box. Chambered in 6.5 Creedmoor, this is a top-tier straight-pull bolt-action rifle designed for speed, accuracy, and performance in the field. Comes with the eye-catching and functional KUIU Verde 2.0 camo stock – perfect for serious hunters. Specs & Features: Caliber: 6.5 Creedmoor Straight-pull bolt action for rapid cycling Cerakote-finished barrel and receiver for durability AccuStock and AccuTrigger system 5-round detachable box magazine Adjustable stock kit. Factory swag bag: tool, lock, plugs, sticker, manual, KUIU Verde 2.0 camo stock – rugged and sleek Brand New in Box (never fired) Price: $1,550 CAD OBO, shipping $40 + your choice to insure. (Current retail value: approx. $1700-1,800 CAD) new tag price $1899.95 Located in Airdrie – willing to meet locally or ship. Occasionally in Red Deer - Will be in Edmonton Friday Oct 17th. This rifle combines speed, precision, and style – ideal for the backcountry hunter or precision shooter alike. Don’t miss out!

categories:GunsSporting Goods

34163 impressions

1223 views

Fabarm chokes EXIS HP, INNER HP & INNER All new most in packaging Exis HP 9/10 extreme 7/10 Long $45 per or both for $80 Inner HP Cylinder - SOLD OUT 2/10 Short IC 5/10 Medium Mod 7/10 Long IM 9/10 Xtreme 12/10 Ultimate $35 per Deals on multiple One choke case free with the first sale of 2 or more chokes Inner- all new in choke holder Cylinder Imp Mod Imp Mod Full $20 per, deals on multiples Choke wrench $40 or $20 if you buy more than $100 worth of tubes Shipping available

categories:GunsSporting Goods

15779 impressions

553 views

Once fired brass. Mixed head stamps. 95%+ Winchester. Uncleaned. Hand sorted. No dented or deformed brass. $55.00 / 1000, $30.00 / 500, $15.00 / 500 Tumbled cleaned and polished, primers in $80.00 / 1000 Will ship on buyer via Canada Post

categories:GunsSporting Goods

10849 impressions

773 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. These are brand new and unused. Several available. Rangeview Sports sells these for $51 + tax. My price = $40 223/5.56 crimped 10/20 round mags. Canadian compliant LAR-15 Pistol Magazine. Legally hold 10 rounds. Get yours while you still can. 410 Alloy Stainless. Steel Heat treated. Coated Black. The 10/20s mags offer benefits in terms of maneuverability and ergonomics, especially when shooting in prone or other shooting positions. $40 each. Will ship at buyer's expense but priority will be given to local sale in Calgary.

categories:GunsSporting Goods

37009 impressions

1457 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5141 impressions

172 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5238 impressions

147 views

Howdy Townpost! I've gotten my hands on some stubby steelies! These are new production Yugoslavian military patterned magazines made in Croatia. These are well made and the milling was done well too. These are all properly pinned to 5 rounds. And are nice for hunting with a shorter mag or hauling it around with a shorter and lighter mag when compared to standard a 5/30 rounder. These magazines will also work with an AK magazine coupler (I have these for sale for $20). Which for an SKS-D some plastic on the coupler must be removed first. The M10X should work with a coupler without issues the same goes for the WK-181 and modded mags in the Type-81. These can be modified to fit into a Type-81. I also have modded mags for sale which are $55 each. I am the only seller who has these Croatian 5/10's in Canada. Even the crappy Gen.1 KCI 5/10's are out of stock practically everywhere in Canada. This is a limited run, so don't miss out. The mags are $40 each. The mags will come in a plastic bag in preserving oil that can be easily cleaned up with any degreaser or simply hot water and dish soap in your kitchen sink with a quick scrub and then dried. It's a good idea too to apply a light coat of gun oil. A single drop rubbed across the entire mag is enough. These mags will fit in the SKS-D, the M10X series, and they might require some hand fitting to work in the WK-181, since Kodiak designed those things with odd magwell dimensions with PMAGS in mind. In all likelihood though, they will work out of the box for you. The magazines are located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $18.89 flat rate. If you order more than 6 mags, shipping will be $21. If you want to order a large amount 10+ shipping will definitely be more.

categories:GunsSporting Goods

47309 impressions

1222 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6617 impressions

241 views

1) Marlin 336 - 1894 - 1895 Folding Rear Sight & Elevator - $170 3) Marlin Front Sight Ramp (0.7" C-C) with Screws  -  $85.00 4) Marlin Front Sight Ramp (1.0" C-C) with Screws  -  $85.00 5) Marlin 336 Front Sight Ramp - Sight Insert - (298") - $75 6) Marlin 336 Hood (1972 to Present Day) - $60 7) Marlin 336 Hood (pre 1972 Rifles) - $45 8) Marlin S-27 Rear Sight & Elevator  - $155 9) Marlin Rocky Mountain Rear Sight with Elevator - $295 10) Marlin Fishhook Elevator - $35 11) Marlin 336 - 1894 Front Barrel Band Screw (pre 84) - $45 12) Marlin 336 - 1894 Front Barrel Band Screw (post 84) - $45 13) Marlin 336 - 1894 Rear Barrel Band Screw - $45 14) Marlin Bullseye Stock Inlay  -  $35.00 15) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 16) 8-40 Pan Head Filler Screws (2) - Blue  -  $20.00 17) 6-48 Pan Head Filler Screws (2) - Blue  -  $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

67287 impressions

1802 views

1) Sako - Tikka Rear Sight - (0.56" / 9/16" C-C) - $195.00 2) Sako - Tikka - Blade Rear Sight - 1 screw - $225.00 3) Sako - Tikka - Front Sight w/ Sight Insert & Screws (1.2" / 30mm C-C) - $275.00 4) Sako Front Sight Ramp (2 screws) - without Sight Insert (0.75" C-C) - $75.00 5) Sako 85 Front Sight Hood - $85.00 6) Sako / Browning Front Sight Hood - $85.00 7) Sako AIII - Finwolf Front Sight Hood - $85.00 10) 6-48 Filler Screws (4) - Blue - $20.00 11) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 12) 6-48 Filler Screws (4) - Stainless - $20.00 13) 8-40 Pan Head Filler Screws (2) - $20.00 14) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

84694 impressions

3454 views

For sale are: scorpion evo3 magazines in 9mm Individual magazines are $40 5 magazines are $175 These will fit in the Scorpion Evo3 These magazines are pinned by rivet (not crimped or welded) to reduce their capacity to 5 rounds (from the original 35) to comply with Canadian law. Shipping available at actual cost or pick up in SE Edmonton. Because of the Canada post strike I would need to ship by the more expensive UPS and UPS not ship to PO boxes. Please click on my user name to learn more about my business, see my other ads, trades or shipping policies. The section of C-21 that requires a PAL to purchase magazines has come into force. I don't need to run your PAL through the government website (like a firearms purchase) but I need to at least see it. This is the last magazine import of this type. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:GunsSporting Goods

40260 impressions

791 views

For sale is a federation firearms 1867 lever action in 410 bore. This version has a 13" barrel making it ideal for wilderness carry or a truck, tractor or quad gun. 410 is very versatile #6 is good for chickens, #4 for general use, while slugs impart better energy than a 357 magnum for predator defense. The gun is optic ready with a mounting rail right above the barrel. I suggest pairing this with a Vector Optics Frenzy. With the purchase of any gun, you can take 40% off any in-stock optic on the website or here on townpost. Please click my user name to see my other ads. PAL must be verified before any viewing, purchase or shipping. To verify I will need your PAL number, date of birth and the email you have on file with the Canada firearms center. If you become evasive when I try to verify your firearms license, I will discontinue communicating with you; it is the law. Shipping is available at actual cost or pick up in SE Edmonton. WARNING: messages sent through townpost are often not getting through. Please text me directly. I can take cash, emt or credit card payments.

categories:GunsSporting Goods

11252 impressions

856 views

Offering 7 various shell holders for $ 7.50 each or $50.00 for all of them. These are for calibers which I no longer reload and some of them were rarely used.....I have listed them by make and number and the caliber for which " I used them " , but most will also be usable and  are listed in the charts for dozens of other calibers:  RCBS # 22 for .43 MAUSER  ,  LYMAN # 3 for 7.62x39  ,  LYMAN # 13 for 300 WEATHERBY MAG  ,  LYMAN # 19 for .30 CARBINE  ,  LYMAN # 15 for 8MM MAUSER  ,  RCBS # 17 for .32 ACP  ,  Unmarked ( LEE ? )# 9 which was for 44-40 WIN. & .44 MAG. Please consult an online, or your own,  Shell Holder Cross Reference Chart to satisfy yourself and verify, what cartridge they will fit.  I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.        ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   *** 

categories:GunsSporting Goods

3991 impressions

126 views