Brand new This is a slightly extended-length barrel, to comply with restrictions in Canada and elsewhere, requiring a 106mm barrel length. This barrel will fit the MR918/MR920/XR920. The spiral fluting reduces weight and adds somewhere for dirt and debris to exit when cycling. This barrel improves the shooting accuracy with its precision-machined design to drop in more easily and fit tight in critical lock up areas. 1/10″ Broach Cut Rifling – Safe with lead bullets. Black Nitride Finish Compatible Gun Models Include: Shadow Systems MR918/MR920/XR920 Elite, Shadow Systems MR918/MR920/XR920 Combat, G19 (Gen1, Gen2, Gen3, Gen4, and Gen5 G19) Made in USA

categories:GunsSporting Goods

1957 impressions

361 views

Brand new Magnification:3-24 Parallax Adjustment:20-infinity Tube Diameter:34mm Objective Lens Diameter:56mm Focal Lens Position: First Focal Plane Lens Coating: Fully Multi-Coated, Full Wide Band, Waterproof Coated, Low Light Enhancement Reticle: ODEN, Illuminated Field of View at 100 yds: 35ft-4.6ft Material: 6061-T6 Eye Relief: 3.5in/90mm Exit Pupil: Low 6.6mm - High 2.23mm Click Value at 100 yds/mm: 1/10TH MRAD Adjustment Range: 35 MRADMounting Length: 6.87in/174mm Length: 13.87in/352mm Weight: 35oz/992g Coming with: Flip Up Lens Covers Lens Cloth Allen Wrench

categories:GunsSporting Goods

2374 impressions

367 views

Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)

categories:GunsSporting Goods

7050 impressions

465 views

If you want to make better steady shots on your game from gophers,coyote,bear,deer,elk,Moose. Our tripod shooting rest is not only the only shooting rest that has 2 rests on one shooting rest.. designed by a Canadian from St Albert Alberta Buy direct from us. Or see us at 1 of the many gun shows we do in Alberta,Saskatchewan . You can set this one rest into 2 positions to use at any time while hunting or shooting for better shot placement.you can go from prone(laying dow) to all other positions ,kneeling position ,to a full standing position. Steady shooter tripods work for shooters from 4 ft tall to 6'6"+ Fully ajustable and suited for all applications to steady your rifle. Made of the best materials. Other stands out there being sold are not built as well as ours but you will pay from $180-$250.00 plus tax limited time price : Shipping included : Buy 1- TRIPOD = $135.00 Buy 2 -TRIPODS = $240.00 Buy 3 -TRIPODS = $350.00 Above prices INCLUDES shipping. BUY NOW AND SAVE. Call us and order a FEW TRIPODS SAVE $$$ and make better shots,also use them as a walking stick too. E-TRANFERS on all orders Thanks for buying the best made SHOOTING REST ,Tripod. STEADY SHOOTER TRIPODS. (They make a great gift for the hunter that has everything.) 306-221-9599 text or call More information on the shooting tripod you may want to read below. The SteadyShooter is the best portable shooting support on the market. Price is about the best price on the market.   The SteadyShooter is light-weight (approx. 985 grams or 2 pounds) and the legs fold together which makes it easy to carry with you at all times when hunting.   SteadyShooter has a fully-adjustable side rest which can be used to instantly shoot from a kneeling or sitting position. In my experiences this is a very useful feature as sometimes getting up for a standing shot can spook your animal away. To my knowledge, no other shooting rest on the market has this feature.   The above-mentioned side-rest  can also be used to allow shooting from the prone position.   The legs have two telescoping sections so they can be varied in length from 32" to 75".  However, using the side rest you can support your rifle at a height as low as 6" (ie. prone position).   The SteadyShooter sets up in seconds when a hunter carries it with the legs extended to his/her preferred length.   The V-yoke rotates 360 degrees and provides a very steady support for your rifle.   The V-yoke and side-rest are both nicely padded with soft rubber to protect your gun.   SteadyShooter folds into a small convenient package (3½" X 35") for transport and storage.   The legs are aluminum and the other parts are molded plastic and/or rubber.

categories:GunsSporting Goods

78846 impressions

7789 views

Holosun AEMS Multi-Reticle Green Dot Sight The AEMS 211301-Green (Advanced Enclosed Micro Sight) is a compact optical sight with 2x larger lens surface area than standard 20mm micro style sights for increased FOV. AEMS-Green is made from 7075 aluminum and includes a 1.63” dot height (lower 1/3 co-witness) Picatinny mount. FEATURES Large FOV in a Compact, Lightweight package Motion On with Last Setting Recall Up to a 50,000 Hour battery life Solar Failsafe™ Multi-Reticle System™ (MRS): 2 MOA Dot, 65 MOA Circle, Circle-Dot Shake Awake Technology™ Super Green LED In the Box : Lower 1/3 Co-witness Mount Multi Tool Clear Flip-down Len Covers User Manual CR2032 Battery Lens Cloth SPECIFICATIONS OPTICAL DATA Reticle 2 MOA Dot & 65 MOA Circle Light Wavelength 590nm Reticle Color Green Parallax Free Yes Unlimited Eye Relief Yes Magnification 1x Multi-Coatings Yes ELECTRONIC DATA Power Source Solar & Battery Battery Type CR2032 Battery Life (Hours) 50,000 Brightness Settings 8 DL& 4 NV PHYSICAL DATA Window Size 1.1 x 0.87 Dimension (in) 2,2 x 1.54 x 1.7 Weight (oz) 3.9 MECHANICAL DATA Housing Material 7075 T6 Aluminum Surface Finish Anodized Adjustment per Click 0.5 MOA W&E Travel Range ±50 MOA ENVIRONMENT DATA Storage Temperature -40℃~70℃ Working Temperature -30℃~60℃ Submersion IPX8 Vibration 1000G

categories:GunsSporting Goods

3280 impressions

522 views

Brand new Model Number: EXPS3-2 The “E” is for “Extreme.” The EXPS3 offers true 2-eyes-open shooting and a 7 mm raised base that still allows for iron sight access. It features easy-to-adjust side buttons and an adjustable, locking, quick-detach lever for easy attachment and removal. It is also the optic of choice for the technologically advanced modern rifle hunter. Its night vision-compatibility makes it a versatile choice for day or night hunting. Night vision: Compatible Length/Width/Height: 3.8” x 2.3” x 2.9” (96.5 x 58.4 x 73.7 mm) Weight: 11.2 oz (317.5 g) Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1” Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings,10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp.

categories:GunsSporting Goods

3364 impressions

400 views

Introducing the AR-6 Compact Tactical Magazine Fed Crossbow. Developed by Steambow Austria, the AR-6 Stinger II uses a top-fed 6-shot magazine. The crossbow splits at the rear with the stock acting as a lever to draw the string, making actuation quick and easy. The fiber optic sight allows fast and intuitive aiming, while a red dot sight or scope can be attached to the front Picatinny rail for even more accurate shots. The AR-6 also features an internal accessory slot for use of an optional laser device. Made of high-quality reinforced polymer, the AR-6 Stinger II is extremely lightweight, rugged, reliable, and accurate to target at distances up to 80 feet. The AR-6 is easily disassembled and can compactly fit into a survival or bug-out bag. Weighing in at just 2.6lbs the AR-6 is easy and convenient to use and transport. The compact dimensions and light weight also make the AR-6 ideal for beginner and smaller statured shooters. Coming with: Vertical foregrip Telescoping AR-15 style buttstock (commercial-spec buffer tube) 6 training arrows 2 strings Stringing aid and manual. Note: Because these crossbows are over 500mm in length and are not designed or altered to be aimed and fired by the action of one hand (handgun style) they are not prohibited class and therefore non-regulated items. No PAL required. Features: •Open sights (rear sight & front sight) on top of the magazine •Top Picatinny rail for red dot sights •Full-length Picatinny rail on the bottom for foregrip or tactical light •Integrated accessory compartment for integral laser sight •2 external ports for attaching side picatinny rails

categories:Guns

11542 impressions

1016 views

Gunwerks Elevate 2.0 Bipod "The Widest Range Of Height Adjustment In Any Hunting Weight Bipod" -super light at 12oz -5-19" of usable height -120 degrees of cant along with 3 leg splay positions -mounts to picatinny rail -was $550 new -spiked feet were $60 new

categories:GunsSporting Goods

866 impressions

327 views

Brand new The RVG is a basic, light weight, cost effective vertical fore grip designed to be compatible with all 1913 Picatinny rails. Constructed from reinforced polymer with aggressive texturing for positive grip and manipulation, it is as durable as it is functional. It is ergonomically designed for use as a traditional vertical grip, but has also been optimized for use with the "Thumb Break Method" of shooting as taught by Magpul Dynamics. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards. Made in USA

categories:Guns

3527 impressions

467 views

X-TERMINATOR is a double-base spherical powder designed for the high volume 223 varmint hunters who demands a clean burning, accurate powder. Excellent flow characteristics and small grain size allow trouble-free loading in small diameter case necks. It performs extremely well with light to medium weight bullets in the 223 Remington. It is also an excellent choice for 17 Remington, 20 calibre cartridges, 222 Remington and the 45-70 Government. Made in Belgium.

categories:GunsSporting Goods

7359 impressions

500 views

This well balanced lightweight made by BSA in England has not been in use for 30 years or more, it is in very good condition with some ware to the blueing and scuffs on the stock. These rifles were manufactured with an integral muzzle brake to reduce recoil and the system works very well. Rifle is chambered in 30-06, hinged floor plate and left hand twist rifling and an adjustable trigger. Asking price is $850 would be happy to supply more pictures. Located west of Bentley. David

categories:GunsSporting Goods

2874 impressions

331 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:GunsSporting Goods

5259 impressions

522 views

Selling my airsoft rifle, used it literally 2 times. Don't need it since I'm moving out. Goes with belt, scope, 5 mags, flash light as on image. Perfect condition. Location: Calgary, AB, Canada Specs: Muzzle Velocity: 370 FPS (with 0.20g BBs) Material: Plastic + Metal Blowback: None Battery: LiPo 11.1V 1300mAh 20/40C (AN/PEQ Size - T-Connect) Gearbox: Ver 2 Metal, Fully Upgradable Hop-up: Adjustable Length: 805-855mm (Adjustable) Weight: 2300g Thread Action: 14mm Negative Magazine Capacity: 125 rounds Energy: 390 FP Inner Barrel Length: 380mm

categories:GunsSporting Goods

5896 impressions

1161 views

Hunting Clothing All prices 40% off Sitka and Kuiu retail price, No taxes and no import duty and fees. Prices are firm If you are near Airdrie feel free to stop by and see the items in person. Kuiu XL Guide Jacket Valo pattern Kuiu size 38 waist Guide pants Valo pattern Kuiu XL Pro quarter zip hoody Valo Pattern Kuiu XL light weight gloves Valo Pattern Kuiu balaclava Valo pattern kuiu Large Yukon Boot Gators Valo Pattern Sitka XL Gradient jacket Marsh Pattern Sitka XL Fahrenheit down Vest Marsh Pattern Sitka XL Hudson Bibs Marsh Pattern Sitka XL Hudson Jacket Marsh Pattern Sitka XLT Jetstream jacket Optifade open country pattern Sitka XLT core light hoody Optifade open country pattern Sitka size 38 waist timberline pant Optifade open country pattern Sitka XL Kelvin Aerolite Jacket Optifade Subalpine pattern Sitka XLT core light hoody Optifade Subalpine pattern Sitka size 38 waist timberline pant Optifade Subalpine pattern Rain Gear (used 50% off retail) Kuiu Large Yukon rain jacket VIAS Pattern Kuiu XL Yukon rain pants Vias Pattern Tripods Sirui T-024SK with the VA-5 video head Vortex optics Pro GT with binocular attachment

categories:GunsSporting Goods

2943 impressions

832 views

This is a great lightweight shotgun for cabin, boat, ATV, and hunting. Also, nice to have it as the backup gun in the bush. New and improved, comes with 3 chocks and a rifle sight. NON-RESTRICTED Calibre: 3"/ 76 mm GAUGE: .410 GA/ (12 GA separate also available) BARREL LENGTH: 13" STOCK: SYNTHETIC STOCK TYPE: HAMMER OUTSIDE OVERALL LENGTH: Folded 51/ Full Length 74 cm WEIGHT: 1.66 kg chokes

categories:Guns

17989 impressions

1979 views

Brand new Developed to improve precision and accuracy with any style or caliber of weapon, the Trijicon RMR (Ruggedized Miniature Reflex) Type 2 is designed to be as durable as the legendary ACOG. The RM01 is an LED sight powered by a standard CR2032 battery. Housed in rugged forged aluminum, the RMR Type 2 is extremely tough yet lightweight. New easy-to-use adjusters with audible clicks allow for quick windage and elevation adjustments. The new Trijicon RMR Type 2 is tougher than any alternative and suitable for military, law enforcement and hunting applications. Magnification:1x Bullet Drop Compensator: No Length: (in)45mm Weight: (oz)1.2 oz w/Battery Illumination Source: LED Reticle Pattern: 3.25 MOA Dot Day Reticle Color: Red Night Reticle Color: Red Bindon Aiming Concept: No Adjustment @ 100 yards (clicks/in): 1 Housing Material: Forged Aluminum Batteries: 1 CR2032 Lithium Battery Battery LifeUp to 2 years of typical use*, up to 5 years in dark storage. *When used at 70ºF (21ºC). Extreme temperatures (high or low) will affect lithium battery performance.

categories:Guns

4488 impressions

467 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 145 g/5.1 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

9902 impressions

411 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 34 mm/1.35” Length: 108 mm/4.25” Weight: 154 g/5.4 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

9391 impressions

334 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 147 g/5.2 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

9169 impressions

413 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 24.5 mm/1” Clearance: 3.4 mm/.133" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 134 g/4.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

8640 impressions

339 views

Brand new The M-LOK QD Sling Mount provides an alternate attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning. Mounts to all M-LOK compatible hand guards and forends Accepts any push-button QD swivel as well as the Magpul QDM Machined from Mil-Spec annodized aluminum for durability and light weight Beveled edges reduce snagging Anti-rotation design prevents swivels from spinning

categories:Guns

2429 impressions

413 views