Side By Side in Canada

Gun ads within
of

Canada

Popular search terms:

Photo of Swiss M1882 Service Antique Revolver, 7.5mm/32 S&W  Swiss Ordnance $43500
$4350
Swiss M1882 Service Antique Revolver, 7.5mm/32 S&W Swiss Ordnance $43500
Please text anytime 6476871484. Fully functional double action revolver in ready to shoot perfect like new condition. No PAL required. Ammo is available but sold separately. (original ammo also can be bought in stores) Comes with FRT paperwork. Tested with smokeless powder and modern ammo. Swiss M1882 Service Revolver, 7.5mm Swiss Ordnance This is a very well made revolver, based on the Chamelot & Devigne and Nagant designs, modified by Swiss firearms designer Rudolf Schmidt. The gun utilized George Abatis' unique safety which disconnects the hammer from the trigger when the loading gate is open. This allows the shooter to advance the cylinder using the trigger to quickly load or unload the chambers. The gun is in excellent condition, with 99% of the blue intact. The straw colors on the hammer and trigger are still well visible. The action is crisp and accurate, and the cylinder indexes and locks properly with zero play. The bore of the 4 1/2inch barrel is good with sharp rifling. The barrel was replaced by arsenal with newer one dated 1902 but it doesn't affect antique status of the gun. Matching serial numbers and assembly numbers. The gun is chambered for the 7.5mm Swiss Ordnance cartridge, but shooters in Switzerland frequently use the .32 S&W Long cartridge instead. Excellent overall. History & Background Swiss M1882 military revolvers are fairly scarce on the Canadian antique market. Although the arsenal at Bern produced over 37,000 pieces between 1883 and 1937, only those with a serial number below 7508 are considered antique in Canada. The M1882 was produced by both the SIG Neuhausen and the Bern factories for military use and private sale. Specimens with a serial number below approximately 20,000 were fitted with plastic grips bearing the Swiss cross. Later models would be fitted with plain wooden grips. The M1882 saw a slight re-design in the 1920’s and was re-named the model 82/29. The M1882 was in service from 1883 until the 1970’s and was carried by military, police, border patrol and home guard forces. These Swiss revolvers are usually in extremely fine condition when sold on the antique market. This can be attributed to the following two facts: firstly, Switzerland has not been involved in a war since 1847, its last armed conflict, a short-lived civil war. The second reason for the fine condition is the Swiss government’s policy to allow soldiers leaving the service to keep their side arms. Given this opportunity, most soldiers were careful to maintain and protect their guns more diligently than if it had been just an issued piece to be returned to the arsenal. The Swiss Ordonanzrevolver of 1882 is chambered for the 7.5 Swiss Ordnance cartridge, but in Switzerland the .32 S&W Long is commonly used, as it is more readily available. ​
categories:Sporting GoodsGuns
15065 impressions
1267 views
Mississauga, ON1 week ago
Photo of Reduced - Winchester Model 1894 Ref #1041. Early five digit serial number. Dated 1897.
$1400
Reduced - Winchester Model 1894 Ref #1041. Early five digit serial number. Dated 1897.
Winchester Model 1894 Ref #1041. Early five digit serial number. Dated 1897. This Winchester is a lever action, sporting rifle, octagon barrel, full mag. Dated 1897 Stock is excellent, appears original. A few marks. Original metal recoil pad fits well. Barrel is 26” long with sights intact. The read sights are intact and appear original. Bore is very nice, no obvious corrosion, does not appear to have ever seen black powder. Rifling throughout. Bluing is 40-50%. There are bumps and scratches on metal expected on a plus 125-year-old firearm. The drivers side receiver has a few light scratches and bangs. Screws have been used but are still usable. There is one on the loading port side that may have been a replacement. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident and protrudes when pushed on. Ejector is intact and tight, and magazine follower functions correctly.  Overall, I grade this firearm as good and should be fully functional. I don’t see many from this time frame with bores looking this good. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations
categories:Sporting GoodsGuns
17671 impressions
1297 views
Medicine Hat, AB9 months ago
Photo of MAG1417-ODT – Magpul TMAG™ 30 AR/M4 GEN M3®
$45.99
MAG1417-ODT – Magpul TMAG™ 30 AR/M4 GEN M3®
The TMAG 30/5 AR/M4 GEN M3 is a highly reliable, translucent, 30-round magazine for STANAG-compatible weapons chambered in 5.56×45 NATO/.223 Remington. Molded from a durable translucent material with an olive drab hue, it provides shooters the ability to visibly verify various ammunition types and the current round count. Featuring ribbed front and rear straps for improved purchase during magazine changes, the sides are left smooth to enhance visibility. Like the rest of the GEN M3 family of magazines, the TMAG incorporates similar internal geometry which translates into unmatched reliability when firing. The four-way, anti-tilt follower is paired with a durable USGI-spec, stainless-steel spring with a painted coil, which maintains the “gas gauge” capability from the “Window” magazine product line. The magazine body is clearly marked to show approximate round counts when inserted in a magazine well, and the paint-pen dot matrix allows for custom markings to be applied by the shooter. The TMAG’s low-profile floor plate also allows for compatibility with the full line of PMAG® AR/M4 GEN M3 floor-plate accessories. The TMAG is optimized for Colt-spec AR15/M4 platforms, but modified internal and external geometry also permits operation with a range of other weapons such as the WK180C, HK® 416/MR556A1/M27 IAR, FN® SCAR™ MK 16/16S, and others. Made in the USA. Available for shipping only. Taxes will be added.
categories:Sporting GoodsGuns
22816 impressions
637 views
New Westminster, BC2 weeks ago
Photo of Various gun scopes.
$100.00
Various gun scopes.
01.UTG Accushot 1-4X28 30mm Mill-dot Long Eye Relief Scope, 36-Color Circle Dot by AccuShot.With rings.-$160.00 02.Hakko Marksman 3-9X40,made in Japan, 1" tube-$130.00 Japan (used,good condition,some scrathes and marks) 03.Grizzly 3-9—32 -$50.00(used,good condition,only little rings marks) 04.Pursuit 6x24x44 with Side focus.Tactical Rifle Scope Adjustable Objective Mil-Dot Reticle Matte.-SOLD 05.NcSTAR Vism Sniper 1.1-4—24 Evolution Series Rifle Scope, Matte Black Finish with Illuminated P4 Sniper Reticle, 30mm Tube.-$200.00 brand new. 06.NcStar Shooter II 3-9x40mm Riflescope w/ Dual Illuminated P4 Sniper Reticle-Sold 07.Husqvarna Jaktoptik 4x32.Duplex type reticle.Rifle scope in matte black.-$80.00(made in Japan). 08.Weaver 3-10x40 Grand Slam Rifle Scope, Matte, Dual-X,Shows Some Wear From Use-$150.00 (Japan). 09.Cabela AR Rifle Scope 3X-12X44 with Side focus.223,Cabela's AR .223 Reticle,30mm Tube,4" - 3.7" Eye Relief,FOV36.7" - 9.2" @ 100 Yards,Matte Black,Red/green illumination with 5 intensity levels-SOLD 01.BSA Sweet 22-3-9X40 AO 3-9X40 Hunting Rifle Scope With Compensation,Duplex Reticle.-$120.00 02.NCStar 4×20 11mm mount-$30.00(used,excellent condition,some little marks) 03.Bushnell 4X Banner 22,11mm mount-$40.00 Japan(used,excellent condition,some marks) 04.BSA Red/Green dot,11mm mount-$50.00 Excellent. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Please send message to: medal1958@gmail.com
categories:Sporting GoodsGuns
63397 impressions
2303 views
Toronto, ON4 days ago
Photo of Anschutz MPR 64 22LR, EP5 5-25x56 Rifle Scope
$2700
Anschutz MPR 64 22LR, EP5 5-25x56 Rifle Scope
Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g
categories:Sporting GoodsGuns
87770 impressions
2576 views
Calgary, AB1 day ago
Photo of Rare Antique Early Production Type I Remington Model 95
$3900
Rare Antique Early Production Type I Remington Model 95
This is a Rare Antique Remington Early Production Type I, A.K.A. The Double Derringer. Remington produced around 150000 model 95’s between 1866 and 1935. There were only around 1600 produced before the addition of an extractor. Making this one the hardest to find for collectors. This type is marked “E.Remington & Sons, Ilion, N.Y.” on one side of the barrel rib and “Elliot’s Patent Dec. 12, 1865” on the other. Later models would see the addition of an extractor and the barrel address moved to the top rib. This has a 3” barrel, is chambered in .41 rimfire and has a spur trigger. There are a a few light handling dings and almost no original finish left. The grips are in fine condition. Mechanically it is still very strong with the action working and cycling as it should. The hinges are intact. There is a slight play in the lock up which would be a fraction of a millimeter. These were carried by many people in the Wild West as they were easily concealed. Wild Bill Hickok is said to have carried a pair of these at times. This would make a great addition to a Remington collection and could be the centre piece to any collection. this is an antique so no PAL is required for purchase. Buyer must be 18 and able to prove it. Shipping is available at buyers expense. All used firearms should be inspected prior to any form of use. Short term layaway options are available.
categories:Sporting GoodsGuns
34922 impressions
2034 views
Calgary, AB6 months ago
Photo of Ruger 10/22 - Upgrade Parts/Kit Package
$20
Ruger 10/22 - Upgrade Parts/Kit Package
Prices A- Double Tap Trigger Over Travel Limiter - $20 B - Aperture Ghost Ring Sights Set - $20 C/D - Extended Magazine Release (Right and Left Handed) - $25 **$5 off each additional part for any order combo (2 or more) **Ex. A+B=$35-($5 discount)=$30 Total **A+B+C=$20+$20+$25=$65-2*($5 discount)=$55 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) Double Tap Trigger Over Travel Limiter - $20 Replaces the Factory Trigger Spring Plunger Reduce the Over Travel by 85% for Quick and easy "Double Taps" Machined Stainless Steel Aperture Ghost Ring Sights Set - $20 Replaces the Factory Open Sights Comes in a Set of Two (Large/Small Apertures) 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm) 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) Material: Precision Machined Stainless Steel Finish: Matte Black Oxide (Blued) Weight: 0.02oz (0.4g) **Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached** *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* Extended Magazine Release (Right and Left Handed) - $25 Replaces the Factory Magazine Release No Snag Design (Tab only on one side) Ergonomic Quick Index Finger Mag Release Compatible with the Charger Pistol Material: Precision Machined Aluminum Finish: Matte Black Anodize Weight: 0.56oz (16g) **Not compatible with older Metal Trigger Groups** **Mag Release does not fit certain aftermarket Archangel Stocks**
categories:Sporting GoodsGuns
61491 impressions
2558 views
Edmonton, AB3 weeks ago
Photo of Leupold Scopes
$400.00
Leupold Scopes
01.Leupold VX III 6.5-20×40 Long Range,Fine Duplex,30 mm tube,Matte.Long Range Scope.Low Profile Turrets.Side-Focus Parallax Adjustment.Slight ring marks, crystal clear optics.-SOLD 02.Leupold VX-Freedom 2-7x33 Riflescope, Hunt-Plex reticle,Waterproof, fogproof, & shockproof, black,1 inch tube.-SOLD 03.Leupold Vari X III 3.5x10 adjustable objective, gloss black finish,Duplex reticle, small use marks.Optics are as new.-$650.00 04.Leupold VX-III Rifle Scope 3.5-10X40mm, Clear bright optics with Duplex Reticle,Silver,1 inch tube. Some ring marks. Good condition.-SOLD 05.Leupold M8-4X Gloss Rifle Scope,Clear bright optics with duplex reticle-SOLD 06.Leupold VX-Freedom 4-12x40mm Riflescope,Eye Relief 3 inches, Duplex, Matte Black, 1 inch tube.-$580.00 As, new. 07.Leupold VX-6HD Rifle Scope 30mm Tube 1-6x 24mm,2ND GEN,SMR2 Reticle, MultiGun Custom Dial System (CDS-ZL2 ZERO LOCK ADJUSTMENT) Illuminated,Black Matte,30mm Tube.-$1950.00 08.Leupold VX-3i 4.5-14x40mm Riflescope, Black,1 inch Tube,Duplex reticle, Matte finish.-$300.00 (Not original/China).Not authentic Leupold products. 09.Leupold Mark-4 M1 3.5-10×40 Long range Illuminated R&G Side Wheel Optical Rifle Scope.-$350.00 (Not original/China). 10.Redfield Revolution 3-9x50mm.Matte,1" tube, 4-Plex reticle.Mint.-$500.00 (Manufactured by Leupold). Some scopes could be have some scratches and marks from being mounted. The buyer must pay Canada Post. Please send message to: medal1958@gmail.com
categories:Sporting GoodsGuns
94289 impressions
7560 views
Toronto, ON11 hours ago
auction, garage sale, or moving sale

Having a garage, estate, or yard sale?

Create an ad event to promote an auction, garage sale, or moving sale.

Item Type
Firearms113Optics16Parts8Storage2Ammunition1
Gun Type
Shotgun61Rifle20Handgun9Other5Replica-or-Deactivated3Muzzleloader2
Action
Double-barreled50Bolt18Semi-automatic14Lever9Revolver8Single-shot8Pump7
Caliber