Savage Elite Precision 300 win mag All accessories are not included No trade Description The 110 Elite Precision is the pinnacle of the Savage’s 110 designs. They’ve begun with the time tested Model 110 action and then rethought every aspect of the rifle. The overhaul includes all of the upgrades demanding shooters make to their long range tack drivers. The 110 Elite Precision has an Adjustable Core Competition chassis from Modular Driven Technologies (MDT). From its full length ARCA rail to its titanium nitride coatings, this is a rifle built for a lifetime of Elite Precision. FEATURES * Savage factory blueprinted action * MDT ACC aluminum chassis with fully adjustable stock * ARCA Rail along the entire length of the chassis * Stainless steel, flash nitride target receiver * Titanium Nitride bolt body * 1.5 – 4 lb user adjustable AccuTrigger * Self timing taper aligned muzzlebrake (Short Action Calibers Only) * MDT Vertical Grip and AICS magazine * Modified Palma contour barrel * 1-Piece 20MOA Rail Action: Bolt Ejection Port: Right Barrel Color: Natural Barrel Finish: Matte Barrel Length (in)/(cm): 30 / 76.200 Barrel Material: Stainless Steel Caliber: 300 WIN MAG Magazine Quantity: 1 Magazine Capacity: 5 Hand: Right Length of Pull (in)/(cm): 14-15.5 / 35.560 Magazine: Detachable Box Magazine Overall Length (in)/(cm): 49.75-50.7 / 126.365 Rate of Twist (in): 1 in 10 Receiver Color: Black Receiver Finish: Matte Receiver Material: Stainless Steel Type: Centerfire Stock Color: Grey Stock Finish: CeraKote Stock Type: Chassis Weight (lb)/(kg): 14.95 / 6.78

categories:Sporting GoodsGuns

91590 impressions

5020 views

Brand new Match-grade precision drop-in barrel 1:10 Twist / 6 groove rifling CNC-machined from 416R stainless steel billet results in superior corrosion resistance and durability Low-temperature vacuum PVD coating creates a durable barrier against wear and tear even in the harshest environments BORSLICK™ Boron Nitride DCD (Dynamic Compound Deposition) inner bore treatment resists heat and carbon buildup Target crowned muzzle Individually hand inspected for accuracy No gunsmith required Limited lifetime warranty Made in USA

categories:Sporting GoodsGuns

3296 impressions

509 views

Brand new Non restricted Action: Bolt Caliber: 308 WIN Capacity: 4 Straight pull bolt action rifle User-adjustable AccuTrigger(1.5-4 lbs) Ambidextrous, removable, multi-positional bolt handle Aluminum receiver with integral 1-piece 20 MOA rail Adjustable length-of-pull and comb height with AccuFit technology AccuStock technology with three dimensional aluminum bedding Proof Research carbon fiber wrapped stainless steel barrel with threaded muzzle (5/8-24) Sling swivel studs 2-Position tang safety Rugged, gray synthetic stock Muzzle brake standard Weight: 7.2lbs Sights: None Length: 44.8" Barrel Twist: 1:10 Barrel Length: 22" Length Of Pull: 12.75-13.75" Made in USA

categories:Sporting GoodsGuns

7755 impressions

564 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2953 impressions

494 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2743 impressions

407 views

Brand new SureFire SFMB muzzle brake suppressor adapters greatly reduce both recoil impulse and muzzle rise so that your weapon tracks straight back, keeping you on target for faster shot-to-shot recovery. The proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated for extreme durability, they are available for a variety of weapon calibers and muzzle thread specs, and every SFMB serves as a rock-solid mounting adapter for SureFire’s combat-proven SOCOM Series Fast-Attach® suppressors. The SFMB design incorporates multiple bearing surfaces to ensure superior suppressor alignment. Blind pilot holes at the 3 o’ clock and 9 o’clock positions enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. Blind pilot holes at the 6 o’clock position enable indexing the adapter at bottom dead center. All that’s required is a basic hand drill and appropriate drill bits. Offset porting delivers greatly reduced recoil impulse and muzzle rise, so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery Multiple bearing surfaces for superior suppressor alignment Precision machined from U.S. mill-certified heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Inspected for all critical dimensions including concentricity and alignment Pilot holes for tuning of muzzle brake and to pin-and-weld to rifle barrel as needed DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system Model Number: SFMB-762-M18x1.5 Caliber: .308(7.62) Thread Pitch: M18X1.5

categories:Sporting GoodsGuns

8414 impressions

574 views

Brand new Patent-pending design provides more than 98% flash elimination; virtually eliminates muzzle rise Serves as a rock-solid mounting adapter for SureFire SOCOM suppressors Multiple bearing surfaces provide suppressor alignment and prevent tines from ringing inside suppressor Port direction may be timed to optimize for right hand, left hand or neutral Precision machined from U.S. mill-certified, heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Individually inspected for all critical dimensions, including concentricity and alignment DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Installation requires no permanent modifications to weapon Durable construction delivers a long service life Color: Black Model No.: WARCOMP-556-M15x1 Caliber: 5.56x45mm NATO Finish: Matte black DLC coating Fabric/Material: US mill-certified heat-treated stainless steel Threads per Inch: M15x1 Gun Model: Heckler & Koch G36/HK MR223 Length: 3.6 in Weight: 3.9 oz Included Accessories: Suppressor Adapter

categories:Sporting GoodsGuns

6339 impressions

617 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2775 impressions

492 views

Brand new Compatible with short action AICS (Accuracy International Chassis Systems) pattern bottom metal and cartridges built on a 0.470" case head such as 7.62x51/.308 Winchester, 7mm-08 Remington, 6.5mm Creedmoor, .260 Remington, .243 Winchester, and others Accepts a cartridge overall length of up to 2.86" Next-generation impact and crush resistant polymer construction Self-lubricating follower for increased reliability Long life stainless steel spring Paint pen dot matrix panels on the bottom of the body to allow for identification marking Flared floorplate aids magazine handling and is easy to disassemble for maintenance NOTE:  Not compatible with smaller base diameter cartridges such as .220 Swift, .223 Remington, .300 AAC Blackout, etc. or larger short action magnums. In addition, due to the wide variety and potential combinations of aftermarket receivers, stocks, chassis, and bottom metal that accept AICS pattern mags, minor fitting may be required. Not compatible with Accuracy International AE rifles or semi-auto platforms utilizing SR25/M110 pattern magazines.

categories:Sporting GoodsGuns

33008 impressions

728 views

Brand new Heavy-Duty quick-disconnect (QD) sling swivel Push-Button quick-detach function for 1-1/4" webbing Rugged manganese-phosphate finished steel construction Compatible with standard QD sling attachment points The Magpul QD Sling Swivel keeps your rifle sling rock steady when you depend on it most. This heavy duty quick-disconnect tactical rifle sling swivel features a push-button quick-detach function specifically for 1-1/4" webbed strapping. The rugged manganese-phosphate finished stainless steel construction lets you know it's ready to work as hard as you do. The Magpul QD Sling Swivel works perfectly with standard QD tactical sling attachment points.

categories:Guns

2419 impressions

379 views

Brand new Includes One Magazine, Speed loader and carry case Fits Glock 20/21 GEN 4 Features Adjustable Sights The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. Last Round Lock Open The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol. Internal Firing Pin Safety Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. Finish All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. 10 Second Installation Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. One Year Factory Direct Warranty Warranty covers any defects in materials or workmanship. (Excluding S&H Charges). Note: Do not use Stinger or any other hyper velocity ammo Do not use Remington Thunderbolts Made in USA

categories:Guns

15418 impressions

1332 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

4193 impressions

485 views

Brand new Match-grade precision drop-in barrel 1:10 Twist / 6 groove rifling CNC-machined from 416R stainless steel billet results in superior corrosion resistance and durability Low-temperature vacuum PVD coating creates a durable barrier against wear and tear even in the harshest environments BORSLICK™ Boron Nitride DCD (Dynamic Compound Deposition) inner bore treatment resists heat and carbon buildup Target crowned muzzle Individually hand inspected for accuracy No gunsmith required Limited lifetime warranty Made in USA

categories:Guns

9982 impressions

768 views

Brand new Match-grade precision upgrade slide Recessed slide cuts for compatibility with RMR® or other optic (cover plate included) CNC machined from 416 stainless steel billet for superior corrosion resistance and durability Quench-Polish-Quench (QPQ) thermo-chemical case hardened to resist normal wear Front and rear serrations for easy slide manipulation Window cuts for more efficient cooling and airflow Individually hand inspected for accuracy No gunsmith required Limited lifetime warranty

categories:Guns

7265 impressions

823 views

Brand new Match-grade precision drop-in barrel 1:10 Twist / 6 groove rifling CNC-machined from 416R stainless steel billet results in superior corrosion resistance and durability Low-temperature vacuum PVD coating creates a durable barrier against wear and tear even in the harshest environments BORSLICK™ Boron Nitride DCD (Dynamic Compound Deposition) inner bore treatment resists heat and carbon buildup Target crowned muzzle Individually hand inspected for accuracy No gunsmith required Limited lifetime warranty Made in USA

categories:Guns

5863 impressions

525 views

Brand new Manufacturer: SGM Tactical Fits: GLOCK 22/23/27/35 Caliber: .40 S&W Capacity: 10/31 Rounds Spring Material: Stainless Steel Spring Body Material: Polymer With Heat Treated Metal Lining Follower Material: Polymer

categories:Sporting GoodsGuns

11044 impressions

1136 views

Type: Pellet Pistol. Distributer: UMAREX Model: Stainless Ruger Mark IV. Materials: Metal and polymer build. Weight: 1.56 pounds (708 grams). Barrel: 5.3 inches (135mm). Total Length: 11 inches (279mm). Propulsion: Spring Piston. Action: SAO Break Barrel. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 1 round. FPS: 320.

categories:Guns

24335 impressions

2391 views

Brand new Match-grade precision drop-in barrel 1:10 Twist / 6 groove rifling CNC-machined from 416R stainless steel billet results in superior corrosion resistance and durability Low-temperature vacuum PVD coating creates a durable barrier against wear and tear even in the harshest environments BORSLICK™ Boron Nitride DCD (Dynamic Compound Deposition) inner bore treatment resists heat and carbon buildup Target crowned muzzle Individually hand inspected for accuracy No gunsmith required Limited lifetime warranty Made in USA Not interested in trade Thanks

categories:Sporting GoodsGuns

17615 impressions

1817 views