223 10 boxes of Sellier and Bellot 55 Gr fmjs for $15 a box 1 box of Federal tactical 55 Gr Nosler ballistic tip for $20 303 British 1 box of federal powershok for $75 22 525 round box of Remington golden bullet for $50 Lots of little 50 round boxes of mixes brands for sale 16 gauge 2 boxes of standard velocity Aguila 2-3/4” size 6 birdshot shells for $20 a box Box of 22 shells of imperial 2-3/4” size 4 for $10 3 boxes of federal 2-3/4” rifled slugs for $10 a box 1 box of Winchester Super X 2-3/4” rifled slugs for $5 9MM Luger 10 boxes of 50 magtech 115 gr for $20 a box 1 box of 250 magtech 115 gr FMJ for $75 1 box of 49 federal 124 gr hydrashok jacketed HPs for $60 1 box of 50 federal 115 JHP for $40 1 box of 50 Winchester SXZ9 115 gr fmj for $20

categories:GunsSporting Goods

644 impressions

107 views

Primers Will split up the 1000 CT boxes into tins of 100 if needed 15 boxes of CCI No.41 small rifle primers for 5.56 ammunition(1000 each box) for $160 a box 7 boxes of federal small pistol gold medal match primers for $150 a box (1000) 1 box of federal small magnum pistol gold medal match primers for $150 (1000) 2 boxes of Remington No 7-1/2 small rifle bench rest primers for $150 a box (1000) 1 box of Remington No 5-1/2 small pistol primers for $140(1000) 9 trays of Winchester standard large rifle primers for $15 a box (100) 2 trays of Winchester standard small pistol primers for $10 a box (100) 5 trays of CCI Large pistol primers for $10 a box (100) 1 tray of CCI small Magnum pistol primers for $15 (100) 2 boxes of sellier and bellot small pistol primers for $150 a box (1000) 3 boxes of sellier and bellot small rifle primers for $160 a box (1000)

categories:GunsSporting Goods

474 impressions

65 views

I am selling off a large supply of reloading supplies and equipment for an elderly friend. If you don’t see something listed that your looking for, just contact me an ask and I might have it. Check my other listings for other reloading components and equipment as I am in the middle of posting lots of ads This listing includes bullets for the following calibers: 9mm, .355/380 ACP, .357/38 cal, 30 cal, 22 cal, 10mm, 7mm/.284, 270/6.8, .300 blackout, 303 cal, .358 diameter 9mm Hornady XTP 90 Gr all new unopened boxes. $40 for a box of 100. Have about 20 boxes for sale 1 box of Sierra 115 grain tournament master FMJ for $40 1 box of Sierra 125 gr tournament master FMJ $40 1 box of Sierra 95 gr tournament master FMJ $35 65 bullets of Sierra 115 gr Powerjacket sport master for $20 20 Bags of 100 Winchester 115 gr FMJ flat base for $20 per bag .355/380 ACP 40 bullets of Barnes 80 Gr tac XP bullets for $20 357/38 cal Bag of 100 Remington 125 gr SJHP bullets for $20 1 box of Hornady 125 gr HP for $40 63 bullets of Speer 158 Gr round nose for $20 30 Cal 9 boxes of Sierra 155 gr palma MatchKings for $60 a box 3 boxes of Lapua 200gr subsonic for $60 a box 83 bullets of Lapua 155 gr for $45 36 bullets of Sierra 110 gr HP Varminters for $15 47 bullets of Barnes TSX 110 Gr for $50 1 box of Hornady vmax 110 Gr for $60 38 bullets of Speer 110 gr hollow points for $20 65 bullets of Speer 165 Gr coattails for $30 50 bullets of xlc Barnes 150 gr solid dry film coated bullets for $20 22 cal(.224 diameter) 7 boxes of Sierra 52 gr match kings for $200 a box (each box has 500) 13 boxes of Sierra 52 gr match kings for $45 a box (each box has 100) A box of about 350 cheaper no name packaged 62 gr FMJ bullets for $50 1 box of about 250 34 gr midway USA dog town HP bullets for $50 1 box of 100 Speer 33 Gr jacketed HP bullets for $30 10mm 1 box of Hornady xtp 155 gr bullets for $35 1 box of 250 Nosler 150 Gr JHP for $100 1 box of 250 Nosler 180 Gr HP for $100 7mm/.284 1 box of Sierra 100 Gr HPs for $60 270/6.8 1 box of Hornady match 110 Gr BTHP for $50 .300 blackout Missouri bullet company 1 box of 250 bullets of 245 Gr RNFP for $100 .358 diameter 390 bullets of Missouri bullet company “cowboy #2” 125 gr TCFP bullets for cowboy action $150 303 cal 500 bullets of Sierra 174 gr Matchking HPBT for $450 Call or text for fastest response. Local pickup in or around Calgary and shipping available as well. If your patient I can drop off anywhere from Calgary to Medicine Hat and from Calgary to Edmonton

categories:GunsSporting Goods

843 impressions

105 views

Currently have glock, S&W MP, and Ruger pcc9/sr9's available. More are available by demand, including rifle base plates. Base plates for airsoft platforms also available. Those are +0 base plates that could be a reloading aid, that looks cool or extends a compact magazine for use in full-size guns.

categories:GunsSporting Goods

63246 impressions

2591 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

19904 impressions

731 views

Alliant 23 -$150 Alliant AR-Comp -$150 IMR 4350 -$90 Varget -$110 N-105 -$170

categories:GunsSporting Goods

5307 impressions

339 views

Alliant 17 powder 1 lbs. $150 IMR 4350 powder 1 lbs. $90 Win. 748 powder 1 lbs. $110 Alliant 23 powder. SOLD IMR 7828 SSC 8 lbs. SOLD Hod. H335 1 lbs. $110. Hod. Varget 1 lbs $110. IMR 4320 1 lbs SOLD Win. 6.5 Staball 1 lbs $100 H380 1 lbs $110 IMR 4895 1 lbs. $110 BLC 2 1 lbs. $110 IMR 4064 1 lbs. $110 Primers: Remington 9 1/2 Mag. 1000 $200.

categories:GunsSporting Goods

14817 impressions

831 views

One pound RL22 for 1 pound RL26, looking to trade as I only have a pound and would rather have 3 pounds for load consistency.

categories:GunsSporting Goods

9127 impressions

391 views

Was used a fair bit but remains in as new condition. No rust or scratches or such. Replaced the expander ball with the carbide version. Original expander plug is still in the case. Still has the original case holder. Includes spare decapping pin. I don't shoot 243win anymore so this is excess to my needs and I'd just as soon clear it out. Note that I am selling alot of other dies and other 243 winchester reloading equipment and cases,bullets, etc. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

4014 impressions

206 views

I don't have anything in 243win anymore so this is surplus to my needs. As to what this does; check out what RCBS says on their website: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

3159 impressions

175 views

This is the easiest and cheapest way to size and lube the bullets as there is no nose punch needed and no special separate press.  You can use your standard single stage press.  Note that Lee no longer includes the ALOX lube in their kits.  Mine have the ALOX lube included.  From the Lee Precision website I stole the following quote: Fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Intended for use on single stage presses only. The push through punch is used in place of a shell holder in the ram. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox (sold separately), push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter. Ebay has these for $60 + $40 shipping.   Amazon: w/o lube for $40 - $90  and lube is $25 extra.  Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

3530 impressions

308 views

Instead of Calibre specific micrometers I use a different system. So this is simply not used anymore and available to you. Check out what RCBS says on their website about using these: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:GunsSporting Goods

3520 impressions

198 views

Text or call - preferred communication. I do not check messages on Townpost and e-mail is checked only once daily. Howa 1500 Mini Action 6.5 Grendel. 20" Heavy Barrel, Green HTI Pillar Bedded stock. 5rd Detachable Mag. Warne Scope rail. This is 6.5 Grendel - not Creedmoor. Fun low recoil intermediate cartridge good for target, varmint and small game up to a deer-size. Like new both cosmetically and function. Asking $900.00 In original box, Manual, receipt. Scope rail is included with riflr. Excellent accuracy 0.5 - 0.75" with Hornady 120gr reloads. If interested will sell dies and ~50 used brass which were shot 2-3 times. Local sale in Calgary; prefer not to ship. Or the cost of shipping and the risks are on the buyer. PAL is a must and will be verified online as per currrent legislation prior to pick-up. Will ask for the picture of your PAL and the e-mail that you have on file with RCMP. Please no PMs on townppost as I am away from the computer most of the time.

categories:GunsSporting Goods

16804 impressions

900 views

For sale Hodgdon H1000 Reloading powder , new production. Located in Calgary  $100 per LB , 4 Available

categories:GunsSporting Goods

2568 impressions

224 views

If you’ve ever fought with stuck or stubborn older-style Lee dies, this little tool makes life a lot easier. My disabled daughter and I printed these to keep at each press station, and they’ve become a staple in our reloading workflow. Designed for older-style Lee dies (non-hex lock rings) Lightweight, durable PLA Perfect for quick adjustments without marring your dies Compact enough to hang on a peg or keep by the press 👉 $5 each — Veteran printed 🇨🇦 👉 Help support a Canadian Army veteran and his disabled daughter 👉 Visit my other ads: https://townpost.ca/user/younggunscanada

categories:GunsSporting Goods

2659 impressions

219 views

I run three Lee 4-Hole Turret Presses for case prep and general reloading. To keep my workspace organized, my disabled daughter and I printed these wall-mounted turret racks — they turned out great, so we printed extras to share. They’re perfect for light-duty use and free up valuable bench space, keeping your turrets neatly displayed and easy to swap out. Available in red, black, and blue. Printed from durable PLA filament. Designed for the Lee 4-Hole Turret Press. 👉 $10 each or 3 for $25 — Veteran printed 🇨🇦 👉 Help support a Canadian Army veteran and his disabled daughter 👉 Check out my other ads: https://townpost.ca/user/younggunscanada

categories:GunsSporting Goods

2373 impressions

291 views

I reload 9 mm, .45 ACP, and .40 S&W on my Lee Pro 1000 together with my disabled daughter. To free up bench space in our little workshop, we printed these wall-mounted turret racks — and they worked beautifully. Printed with PLA, they’re perfect for light-duty use and keeping your turrets organized and out of the way, so your press area stays clear and efficient. Available in Black, Blue, and Red. $10 each or 3 for $25 👉 Help support a Canadian Army veteran and his disabled daughter. 👉 Check out my other ads: https://townpost.ca/user/younggunscanada

categories:GunsSporting Goods

2101 impressions

224 views

Marlin 1895 in 45-70 Can meet in edmonton, grande prairie, calgary and the surrounding areas. Really good gun, shoots great and works awesome, down sizing but maybe interested in a partial trade for a 20 gauge Comes with the shell holder, xs lever scout rail, reloading dies and vortex crossfire II Hunting gun so has some little scratches and a chip out of the butt stock pictured Price is OBO but asking 2000 for the rifle and attachments and 2600 with ammo

categories:GunsSporting Goods

12793 impressions

784 views

This is a functional scarce and unique Antique Galand Model 1868 single and double action Revolver. Designed for 7 mm Perrin which gives it antique status, this revolver happens to accept the nearly identical .32 S&W short cartridge which can be reloaded at a low cost, and can even be made from cut down .32 S&W Long brass. There are very few antiques that will accept this caliber, so this is a lucky find. Unlike most antiques which are big and heavy, this is a small frame and compact revolver which still shoots a reliable round. Overall length is 7 inches. Mechanics are fair, with a working action in both single and double action. The hammer is strong and indexing is reliable. The rifling is still strongly defined down the 3" barrel, with evenly scattered patches of inactive oxidation from black powder use. The Galand patented mechanism involves a very unique lever which pulls the barrel and cylinder straight forward while ejecting spent shells. All components of this work fine. As a revolver that's a century and a half old, some wear and wiggle is evident in the lever and hinge mechanism, but it still works consistently and properly. Visually this revolver has an even gray/blue surface with some bits of lustre showing beyond the aged patina. No significant pitting is evident, though scattered dings and scratches are present. The grips are solid, with the left one showing an old crack that could be pretty easily stabilized and closed back up. No PAL, 18+ Ships Canada Check my ads for more antiques. I make no claims about the safety of shooting ANY antique! Check with a gunsmith.

categories:GunsSporting Goods

12116 impressions

673 views

Selling to get some cash flow, this is an antique, all matching and fully operational Smith & Wesson top break double action new model #3 revolver. These were the first double action guns ever made by S&W, driven by demand to increase rapid performance at close quarters while still having the choice to shoot with more accuracy in single action. These were mostly chambered in the popular .44 Russian round. These can be purchased in cowboy loads from myself as part of the deal, found online, or easily reloaded with .44 russian, magnum, or special brass. As an antique, this handgun requires no licensing or registration to buy or own in Canada. Do your own legal research! This gun is serial number 35XXX, dating its manufacture to the late 1880s. As a nearly 140 year old gun, the mechanical condition is strong, with all three positions of the hammer exactly as desired and both single and double action trigger pulls nice and light. Indexing is reliable with a lockup of both the cylinder and the top break hatch having less than 1mm wiggle room. The original hard black grips are still sturdy and nice. The 6 inch barrel on this bad boy still has loads of accurate lead to deliver. Ejector functions perfectly. Visually, the overall look is a peppered patina. Very little of the original nickel remains, with a mottled "in the white" surface being most dominant. No severe or active oxidation can be found. All of the two line address and patent info are clearly visible on the top strap, with the S&W stylized logo featured strongly on the right side. An dependable example from a world renowned manufacturer. No PAL, must be 18 Ships Canada Comes with digital FRT report Check my ads for more antiques! I make no claims about the safety of firing ANY antique gun. Check with a gunsmith!

categories:GunsSporting Goods

13149 impressions

943 views

Factory Loads: 1) 308 Win: 1 box new Barnes Vor-Tx 150gr TTSX BT. $60 2) .270 Rem: 16 of 20 Federal Trophy Bonded Tip 140gr $30 Reloading Components: 1) .30 cal: 1 box Speer 150gr BT, 1 box Speer 180gr BT, 1 box Speer 130 hollow pt, 1 box Barnes 175gr LRX BT. $OBO 2) 270 Win, Remington unprimed brass x 50 new. $40 Dies: 6.5x55 all RCBS $OBO

categories:GunsSporting Goods

34858 impressions

2340 views