Brand new Non-restricted Lever Action Caliber: .22 LR Capacity: 16+1 Barrel Length:  20″ Barrel Type:  Octagon Blued Steel Rate of Twist:  1:16 Overall Length:  38.5″ Weight:  6.75 lbs. Receiver Finish:  Nickel Plated Rear Sight:  Fully Adj. Semi-Buckhorn w/ Diamond Insert Front Sight:  Brass Bead Scopeability:  Drilled and Tapped Scope Mount Type:  GB-CSM Stock Material:  American Walnut Buttplate/Pad:  Brass Length of Pull:  14″ Safety:  1/4 Cock Best Uses:  Target/Hunting/Collector Embellishments/Extras:  Receiver Engraving with 24K Gold Plating. Engraved/painted stock and forearm Made in USA

categories:Sporting GoodsGuns

15795 impressions

632 views

Brand new Non-restricted Lever Action Caliber: .22 LR Capacity: 16+1 Barrel Length:  20″ Barrel Type:  Octagon Blued Steel Rate of Twist:  1:16 Overall Length:  38.5″ Weight:  6.75 lbs. Receiver Finish:  Nickel Plated Rear Sight:  Fully Adj. Semi-Buckhorn w/ Diamond Insert Front Sight:  Brass Bead Scopeability:  Drilled and Tapped Scope Mount Type:  GB-CSM Stock Material:  American Walnut Buttplate/Pad:  Brass Length of Pull:  14″ Safety:  1/4 Cock Best Uses:  Target/Hunting/Collector Embellishments/Extras:  Receiver Engraving with 24K Gold Plating. Engraved/painted stock and forearm Made in USA

categories:Sporting GoodsGuns

17363 impressions

673 views

*Prior to sale, a valid PAL (gun license) will be required. Please send a picture of your PAL. Selling my Derya TM 22 lever action to clear up some space in my safe. Selling for $600. Barely used; I have put about 200 rounds through it. Will meet in the Calgary area; local sale only.

categories:Sporting GoodsGuns

3985 impressions

373 views

Brand new Non-restricted Lever Action Caliber: .22 LR Capacity: 16+1 Barrel Length:  20″ Barrel Type:  Octagon Blued Steel Rate of Twist:  1:16 Overall Length:  38.5″ Weight:  6.75 lbs. Receiver Finish:  Nickel Plated Rear Sight:  Fully Adj. Semi-Buckhorn w/ Diamond Insert Front Sight:  Brass Bead Scopeability:  Drilled and Tapped Scope Mount Type:  GB-CSM Stock Material:  American Walnut Buttplate/Pad:  Nickel Plated Length of Pull:  14″ Safety:  1/4 Cock Best Uses:  Target/Hunting/Collector Embellishments/Extras:  Receiver Engraving with 24K Gold Plating. Made in USA

categories:Sporting GoodsGuns

13076 impressions

868 views

Gently used Browning Citori CX O/U. 30” barrel, 3” chamber. Like new condition. Bought new in 2019. Comes with full set of Invector Plus Diana chokes and the original 2 Midas chokes. Valid PAL required. Pick up only. Will trade for Marlin SBL series .357 lever action. $2250.00 OBO

categories:Sporting GoodsGuns

4014 impressions

237 views

Vortex razor HD LHT 3-15x42 SFP MOA with HSR-5i reticle. Package deal with kestrel glassing system throw lever, Alberta tactical rifle systems Ultra-lite rings (height low), vortex low pro bubble level. Comes with everything that originally came in box, sunshade, zero stop, cleaning cloth and unused voucher for a custom ballistic strip from Kenton industries. Scope was gently used for one hunting season lived in a neoprene scope cover and is in perfect condition. No scope ring marks or scratches on lenses. This package new before tax would cost $2219 if bought locally in Calgary. Willing to sell scope separately from accessories but will not sell accessories until scope is sold. Package $1750 OBO scope alone $1550 OBO  Call or text 587-227-6321 for any further questions or arrange pickup

categories:Sporting GoodsGuns

2471 impressions

221 views

TRADE FOR SEMI AUTO shotguns or LEVER ACTION. This is a Limited edition Rizzini 12 gauge I have about 400 shells through it used for sporting clays, has been rigorously cleaned and looked after. No damage like new.

categories:Sporting GoodsGuns

7692 impressions

685 views

Red Dot mount for Win 94 lever gun. This is the cleanest and easiest way to add a red dot to your rifle. If you have the AE version use two bolts to secure via the front scope mount holes. If not, any competent gunsmith can drill/ tap two  holes easily.  fits RMR footprint,  (2) available,  $100 shipped.  *please see my other ads*  

categories:Sporting GoodsGuns

13448 impressions

332 views

This is a functional scarce and unique Antique Galand Model 1868 single and double action Revolver. Designed for 7 mm Perrin which gives it antique status, this revolver happens to accept the nearly identical .32 S&W short cartridge which can be reloaded at a low cost, and can even be made from cut down .32 S&W Long brass. There are very few antiques that will accept this caliber, so this is a lucky find. Unlike most antiques which are big and heavy, this is a small frame and compact revolver which still shoots a reliable round. Overall length is 7 inches. Mechanics are fair, with a working action in both single and double action. The hammer is strong and indexing is reliable. The rifling is still strongly defined down the 3" barrel, with evenly scattered patches of inactive oxidation from black powder use. The Galand patented mechanism involves a very unique lever which pulls the barrel and cylinder straight forward while ejecting spent shells. All components of this work fine. As a revolver that's a century and a half old, some wear and wiggle is evident in the lever and hinge mechanism, but it still works consistently and properly. Visually this revolver has an even gray/blue surface with some bits of lustre showing beyond the aged patina. No significant pitting is evident, though scattered dings and scratches are present. The grips are solid, with the left one showing an old crack that could be pretty easily stabilized and closed back up. No PAL, 18+ Ships Canada Check my ads for more antiques. I make no claims about the safety of shooting ANY antique! Check with a gunsmith.

categories:Sporting GoodsGuns

16029 impressions

924 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:Sporting GoodsGuns

6266 impressions

614 views

Introducing the AR-6 Compact Tactical Magazine Fed Crossbow. Developed by Steambow Austria, the AR-6 Stinger II uses a top-fed 6-shot magazine. The crossbow splits at the rear with the stock acting as a lever to draw the string, making actuation quick and easy. The fiber optic sight allows fast and intuitive aiming, while a red dot sight or scope can be attached to the front Picatinny rail for even more accurate shots. The AR-6 also features an internal accessory slot for use of an optional laser device. Made of high-quality reinforced polymer, the AR-6 Stinger II is extremely lightweight, rugged, reliable, and accurate to target at distances up to 80 feet. The AR-6 is easily disassembled and can compactly fit into a survival or bug-out bag. Weighing in at just 2.6lbs the AR-6 is easy and convenient to use and transport. The compact dimensions and light weight also make the AR-6 ideal for beginner and smaller statured shooters. Coming with: Vertical foregrip Telescoping AR-15 style buttstock (commercial-spec buffer tube) 6 training arrows 2 strings Stringing aid and manual. Note: Because these crossbows are over 500mm in length and are not designed or altered to be aimed and fired by the action of one hand (handgun style) they are not prohibited class and therefore non-regulated items. No PAL required. Features: •Open sights (rear sight & front sight) on top of the magazine •Top Picatinny rail for red dot sights •Full-length Picatinny rail on the bottom for foregrip or tactical light •Integrated accessory compartment for integral laser sight •2 external ports for attaching side picatinny rails

categories:Guns

12540 impressions

1093 views

I have a Rossi R92 forsale lighty used super fun to shot great bush gun. Reason for selling bought another lever and this one just sits now... asking 1200.00

categories:Sporting GoodsGuns

4619 impressions

280 views

Want a new optic, and want to buy Canadian? There's a new option for Canadian glass, sort of: Apex Optics is based in Calgary, but its scopes are actually manufactured in Japan. Apex Optics was founded in early 2020 by a group of western shooters from a range of competitive disciplines. Their goal was to create a new optics brand for competition and long-range shooting reflecting their backgrounds (IPSC, Steel Challenge, 3-Gun, Precision Rimfire, Extreme Long Range, etc.). Several of these shooters are well-known in the west's shooting scene, with long history of competition. Apex's first release will be the Rival 4-32x56 mm, which it's been developing for about 18 months. Apex partnered with Japan Optics to actually manufacture the scope, although it's designed here in Canuckistan. The scopes also undergo quality control testing in Japan, and a secondary round of quality control in Calgary. This scope has some unique features due to its design process, including Apex's proprietary CLR competition reticle. This first focal plane reticle is designed for long-range matches where shooters need their scope to handle quick transitions, with top half of the reticle unobstructed. It comes with ranging marks, for scenarios where you can't use electronic rangefinders, and has six-level illuminated main stadia. You can see a full explanation of the CLR reticle design at Apex's website. The scope also comes with elevation turret that features 15 MILs per revolution; windage and elevation adjustments are 0.1 MIL per click. The turrets are not locking, but come with mechanical zero stop and two-turn indicators (future scopes may come with locking turrets). There's a stainless steel pop-up turn indicator. Apex says it has the industry's first see-through integrated and removable throw lever. The new Rival scope has parallax knob indicators for approximate value for 100-, 200-, 500-, and 800-yard distances. There's a proprietary hydrophobic seven-layer multi-coated lens, and other features selected to give Apex's customers top performance. The scopes are certified IP67 dustproof/waterproof, and 1200G shockproof. THE BEST WARRANTY YOU'LL NEVER HAVE TO USE. WORLD-CLASS SUPPORT WHEN YOU DO, THAT IS OUR OATH TO YOU! All of our products carry a Lifetime Warranty. We’ll replace any product if it’s not up to our standards of quality and durability, no questions asked. If something stopped working as it should, then let us know and we’ll take care of it at no cost to you. The only things we don’t cover are “Acts of God” like fire, lighting strikes and flooding. Most of those scenarios are typically covered by your insurance. We also don’t cover theft or intentional/neglectful damage or destruction.

categories:Sporting GoodsGuns

82084 impressions

5173 views