Sea Can in Cochrane

Free classified ads to buy and sell items locally in Cochrane, Alberta.
Ads within
of

Cochrane

Photo of Anschutz MPR 64 22LR, EP5 5-25x56 Rifle Scope
$2700
Anschutz MPR 64 22LR, EP5 5-25x56 Rifle Scope
Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g
categories:GunsSporting Goods
78083 impressions
2343 views
Calgary, AB2 days ago
Photo of John Forbes of Liverpool Sawhandle Smoothbore Adjustable Trigger .62 Calibre Percussion Conversion Fine Antique Dueling Pistol
$4950
John Forbes of Liverpool Sawhandle Smoothbore Adjustable Trigger .62 Calibre Percussion Conversion Fine Antique Dueling Pistol
Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.
categories:GunsSporting Goods
12601 impressions
418 views
Calgary, AB1 week ago
Photo of Hollis Screw-Barrel .40 Cal. Percussion Antique Coat Pistol
$1200
Hollis Screw-Barrel .40 Cal. Percussion Antique Coat Pistol
Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.
categories:GunsSporting Goods
10546 impressions
274 views
Calgary, AB1 week ago
Photo of Nock .40 Cal. Spring-Loaded Bayoneted Screw-Barrel Percussion Antique Coat Pistol
$1950
Nock .40 Cal. Spring-Loaded Bayoneted Screw-Barrel Percussion Antique Coat Pistol
Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.
categories:GunsSporting Goods
10842 impressions
236 views
Calgary, AB1 week ago
Photo of Custom-Made Ithaca M37 Featherlight "Stakeout" Sawed-Off 12 Gauge 2¾ Shotgun
$700
Custom-Made Ithaca M37 Featherlight "Stakeout" Sawed-Off 12 Gauge 2¾ Shotgun
Howdy there Townpost! I have another custom 12 Gauge delight for you to take a gander at! This is a custom-made one of a kind Ithaca M37 Featherlite put together by my gunsmith for me. As pictured, the overall length is 30 inches long and has a barrel length of 18.5 inches. It weighs 5 lbs, 7oz unloaded, so Featherlight is definitely even more apt than this when this thing was full length. Some fairly extensive work was done. Most notably the barrel and stock were cut down and reshaped the muzzle crown was nicely dressed with file work and reblued and it's nice, smooth and square to the barrel. The original red Ithaca fibreoptic front bead site was reinstalled at the new muzzle. The stock bolt with shortened and a nice decorative cast pewter medallion was added to the butt of the stock to cover up the bolt hole and add very nice piece of decorative flair. And sling swivels were added so this can carried around on sling. The action is very smooth the action release locks up properly, and the spring on it is in good condition. And it slam fires without a problem. What is slam fire you may ask? It means you can hold down the trigger and work the action and every time you close the action with the trigger held down the gun will fire. The gun will fire as fast as you can work the action. So needless to say it's pretty fun to shoot.  This would make an excellent hiking, camping or backpacking shotgun for predator defense in my opinion. Or if she just want a sawed-off shotgun that you can slam fire this is the gun for you. Ithaca started making short versions of the M37 for law enforcement called the Stakeout I believe those were mostly in 20 gauge and they came out sometime in the 70s or '80s. Inland Manufacturing to this day makes something similar to this called the Stakeout II for the US market with an MSRP of $750US. Short versions of the M37 have appeared in a lot of media, probably most notably is the shotgun in the movie Aliens where it's used for "close encounters". There's a well documented cut down Ithaca Featherweight by a Navy SEAL who put a duckbill spreader on it, put a magazine tube extension so that it held 8 and cut the stock off in much the fashion that this one is. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's very short when broken down, and light so it should be cheap to ship. PAL is a must!
categories:GunsSporting Goods
2348 impressions
226 views
Calgary, AB1 week ago
Photo of GL Rogue Loop, SW 350 dry bags
$280.00
GL Rogue Loop, SW 350 dry bags
Giant Loop Rogue Dry Bag The Rogue is an indispensable, easy-to-use roll-top dry bag that’s ideal for a wide variety of adventures. It features 17 liters of packable volume and seamlessly integrates with Giant Loop Saddlebags and Panniers. Openings on both ends mean quick and easy access without having to dig or unstrap from saddlebags, panniers, or remove from a rack. A handy air purge valve allows compact compression of gear and bag when packing. Upon arriving at your destination, two included carry straps convert the bag into a backpack. VOLUME • Max: 17 liters (1,030 cubic inches). • Minimum: 10 liters (610 cubic inches). DIMENSIONS • Flat: 32″ L x 13.5″ W (81 cm L x 34 cm W). • Loaded with gear and ends rolled three times for waterproof seal: 19″ L x 9″ W (48 cm L x 23 cm W). WEIGHT • 1 lb. 15 oz. (0.9 kg), with all included components. MATERIALS • Rugged Bomb Shell™ coated fabric construction with 100% waterproof radio-frequency (RF) welded seams. • Plastic side-release buckles, nylon webbing, and reflective trim. SW-Motech Drybag 350 Waterproof Tail Bag The Drybag 350 can be attached to your motorcycle in just a few simple steps and offers plenty of space for your travel essentials. The zip pocket on the side offers quick access to personal items, and a practical carrying handle makes it easy to transport the bag by hand. Thanks to the elastic PVC material, the bags can be easily rolled and transported compressed on the motorcycle regardless of the luggage load. The drybags are waterproof in the main compartment and are highly UV-resistant. The new arrangement of the straps allows easy combination with other Drybag models on the passenger seat or the rack. Thanks to their simple design, the new Drybags perfectly fit to the waterproof SysBag WP bags and the WP tank bags from the PRO line. Features: • Welded outer pocket • MOLLE adapter for attaching accessory bags • Universal fit for almost all motorcycles • Made of sturdy 500D PVC • Waterproof, extremely durable roll • Waterproof, extremely durable luggage roll • Additional loop straps allow the bags to be pulled closer to the motorcycle • Integrated handle on the side • Waterproof roll closure and taped seams • Reflective details for increased safety on the road
categories:Camping and Survival GearSporting Goods
934 impressions
133 views
Calgary, AB1 month ago
Photo of RCBS Precision Micrometer 243win
$90
RCBS Precision Micrometer 243win
I don't have anything in 243win anymore so this is surplus to my needs. As to what this does; check out what RCBS says on their website: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody
categories:GunsSporting Goods
3159 impressions
175 views
Calgary, AB1 month ago
Photo of 0.430" Lee Bullet Lubricating and Sizing Kits
$40
0.430" Lee Bullet Lubricating and Sizing Kits
This is the easiest and cheapest way to size and lube the bullets as there is no nose punch needed and no special separate press.  You can use your standard single stage press.  Note that Lee no longer includes the ALOX lube in their kits.  Mine have the ALOX lube included.  From the Lee Precision website I stole the following quote: Fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Intended for use on single stage presses only. The push through punch is used in place of a shell holder in the ram. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox (sold separately), push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter. Ebay has these for $60 + $40 shipping.   Amazon: w/o lube for $40 - $90  and lube is $25 extra.  Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody
categories:GunsSporting Goods
3530 impressions
308 views
Calgary, AB1 month ago
Photo of RCBS Precision Micrometer 300WinMag
$90
RCBS Precision Micrometer 300WinMag
Instead of Calibre specific micrometers I use a different system. So this is simply not used anymore and available to you. Check out what RCBS says on their website about using these: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody
categories:GunsSporting Goods
3520 impressions
198 views
Calgary, AB1 month ago
Photo of ANTIQUE (no PAL) Smith & Wesson .44 Russian Double Action New Model No. 3 Revolver
$3750
ANTIQUE (no PAL) Smith & Wesson .44 Russian Double Action New Model No. 3 Revolver
Selling to get some cash flow, this is an antique, all matching and fully operational Smith & Wesson top break double action new model #3 revolver. These were the first double action guns ever made by S&W, driven by demand to increase rapid performance at close quarters while still having the choice to shoot with more accuracy in single action. These were mostly chambered in the popular .44 Russian round. These can be purchased in cowboy loads from myself as part of the deal, found online, or easily reloaded with .44 russian, magnum, or special brass. As an antique, this handgun requires no licensing or registration to buy or own in Canada. Do your own legal research! This gun is serial number 35XXX, dating its manufacture to the late 1880s. As a nearly 140 year old gun, the mechanical condition is strong, with all three positions of the hammer exactly as desired and both single and double action trigger pulls nice and light. Indexing is reliable with a lockup of both the cylinder and the top break hatch having less than 1mm wiggle room. The original hard black grips are still sturdy and nice. The 6 inch barrel on this bad boy still has loads of accurate lead to deliver. Ejector functions perfectly. Visually, the overall look is a peppered patina. Very little of the original nickel remains, with a mottled "in the white" surface being most dominant. No severe or active oxidation can be found. All of the two line address and patent info are clearly visible on the top strap, with the S&W stylized logo featured strongly on the right side. An dependable example from a world renowned manufacturer. No PAL, must be 18 Ships Canada Comes with digital FRT report Check my ads for more antiques! I make no claims about the safety of firing ANY antique gun. Check with a gunsmith!
categories:GunsSporting Goods
13142 impressions
942 views
Calgary, AB4 months ago
Photo of RV HAULING - Western Canada Wide!
Free
RV HAULING - Western Canada Wide!
www.ihaulrvs.ca MATURE RV HAULER 30+ Years Experience!!! SPECIALIZING in ONLY RVs! Text: 403-669-2133 Please visit: www.ihaulrvs.ca 5TH WHEELS, HOLIDAY TRAILERS and DESTINATION TRAILERS HAULED ANYWHERE in WESTERN CANADA! Hauling RV’s up to 21,000 lbs GVW Class 3 Licensed! (a must for BC!) Service Highlights Include: Dealership Pick Ups Service Departments Storage Facilities Campgrounds Seasonal RV Sites Rural Destinations Long Distance Relocations Mountain Hauling BC Ferry Crossings Hauls from Wildfire Evacuation Alert zones. MANY YEARS of EXPERIENCE HAULING RVs in a SAFE and RELIABLE manner. Tons of experience hauling on high mountain passes throughout BC. When delivering to campgrounds, I place your trailer onto your camp site for you (some conditions may apply). Liability insured to tow your RV. NOTE: All RVs must be roadworthy and have a valid trailer plate, or have an in-transit permit. ************************************************ QUOTES are FREE!! Call or Text: 403-669-2133 Email: rvhauling@shaw.ca Visit: www.ihaulrvs.ca (online form) Or… Reply to this Ad! PLEASE PROVIDE ALL the FOLLOWING INFORMATION. 1. The DETAILS of YOUR RV Include Year, Make & Model 2. PRECISE PICKUP and DELIVERY LOCATIONS. Actual Addresses Please. (Street address/ Rural address/ campground name/ GPS location/ Google pin drop/ etc) 3. The requested pickup date. I require a close estimate of when you want the trailer hauled. If you’re simply wanting a very rough estimate for planning purposes, please state this when you reply. I can respond quickly if I know this. ************************************************ CASH or E-Transfer ONLY SERIOUS INQUIRIES ONLY ************************************************
categories:Business and Services
24248 impressions
902 views
Chestermere, AB7 months ago
Photo of Quechua4-Person Inflatable Camping Tent, Air Seconds
$550
Quechua4-Person Inflatable Camping Tent, Air Seconds
Brand new inflatable tent. 880 new with pump. Comes with brand new air pump. Never slept in. Incredible family tent. Very high quality. Pick up Cochrane An inflatable tent for 4 people with maximum comfort: two separate bedrooms, a spacious living room, and the Fresh & Black technology keeping the inside cool. Our motivation? To offer you a very fast-pitching inflatable tent with our Fresh&Black. Less heat and light in your tent, so you can decide when to wake up! Features Living room Living room of 5.8 sqm with a tent height of 1.95 m. This tent has several pieces of equipment: - a built-in groundsheet at the entrance in case of rain - mosquito net windows with blackout cover - storage pockets in the bedrooms and living room Pitching/Striking Inflatable all-in-one structure with pre-assembled bedrooms and fly sheet. Using our Quechua red 5.2-litre pump with built-in pressure gauge, we advise you to inflate the tubes to 7 psi pressure. To view this pump, copy the reference 8243066 and paste it into the search engine of our website. Sun protection Our Fresh&Black technology relies on a UPF 50+ sun protection fabric. Important: be careful, a large amount of UV rays can pass through an open door. Ventilation The ventilated flysheet on the living room lets you ventilate and limit condensation inside your tent. Outside each room is a high ventilation hatch. Inside each bedroom is a large, low ventilation hatch. The living room is equipped with a mosquito net and the bedrooms with high mosquito nets. Wind resistance We test all our tents in a wind tunnel on a turntable. The goal is to expose each side of our tent to the same wind intensity. When the tent is properly pitched and the guy ropes are in place, it should remain habitable in a force 7 wind, measured at 60 km/h. Waterproofing We test our tents to validate their waterproofing. The first test is done in the laboratory: 4 hours under 200 litres of water/hour/m², the equivalent of a tropical rain shower of 200 mm per hour. The second test is done by our teams in the field under real conditions. This tent is equipped with a polyurethane-coated polyester flysheet with 2000 mm water resistance. It also has seams taped using heat-sealed strips and a 190 g/m² polyethylene groundsheet. Size and weight Rectangular cover | 75 x 39 x 39 cm | 114 litres | 17.5 kg Guarantee As designers and users who love our playground, we care about the durability of our products. That's why all our tents are designed to be repairable. Spare parts and repairs of inflatable poles are available at the workshop of your Decathlon store or on our website at the following address: http://bit.ly/sav-tentes. Should you have a problem with this tent, check the after-sales file: http://bit.ly/tente-gonflable-4p-2ch Poles, pegs Inflatable poles - All our inflatable poles have a two-layer arch structure: an air chamber in thermoplastic polyurethane (TPU) and a 600 denier* polyester cover. Living room reinforcement - There's an aluminum bar in the living room to stiffen the structure. Tent pegs - All our pegs are made of steel and have a diameter of 6 mm. *600 deniers indicates a weight of 600 g for a length of 9 m. Sleeping width Each bedroom of this tent is designed to accommodate a maximum of two 70 cm-wide mattresses.
categories:Camping and Survival GearSporting Goods
2506 impressions
622 views
Cochrane, AB8 months ago
Showing 21 of 44 records