I have 6 Brand new never used (well one was used to test fit) Pistol sleeves. They are lockable, and fit my 5.5 inch revolver with lots of room. I was able to zip it shut with a combo trigger lock on as well (kind of snug but doable). Did not fit into my locker. Price is each, shipped.

categories:Sporting GoodsGuns

1924 impressions

164 views

Have a 10rd MDT pistol mag $25. I don’t know that I used it more than once or twice. Meet in south Edmonton.

categories:Sporting GoodsGuns

5570 impressions

665 views

No pal req. 2x starter pistols. $600 shipped Firm.

categories:Sporting GoodsGuns

56945 impressions

3435 views

2 3 position handgun racks powder coated steel, excellent condition p/u in Millwoods. $40 for both.

categories:Sporting GoodsGuns

2798 impressions

390 views

Crossman .22 pistol 5 full C02 cartridges Full tin of X magnum pellets 

categories:Sporting GoodsGuns

11778 impressions

930 views

Large pistol primers, Federal No 155 and Winchester No WLP, 150$ per brick Used both brands for reload 7.62x39 (trade my rifle to bigger caliber for 800m and over range), groups at 100 m was perfect with Hornady150 FMJBT, probably will be good for small calibers like 223 too

categories:Sporting GoodsGuns

7735 impressions

591 views

Brand new pistol case

categories:Sporting GoodsGuns

2385 impressions

407 views

Vector Optic base plate for M&P pistol. New in package, never installed reason for selling, optic I have does not match the footprint on baseplate. Located Stony Plain.

categories:Sporting GoodsGuns

4320 impressions

576 views

Introducing an innovative solution for mounting optics to your pistol slide: The Versa Tactical SIGHTSECURE dovetail mount. Available for Beretta and for Glock. To purchase, head to this link: https://partsonly.ca/product/glock-dovetail-optic-mounting-kit/ This system allows the user to install an optic on a slide that does not have an optic cut. Made of a solid piece of 4340 steel, this mount will not bend or break. Has been extensively field tested with thousands of rounds fired. There are no moving parts, latches or other components to wear/break. Simply slide the Versa Tactical mount in the slot where your factory rear sight goes, and install the 2 expander screws. Then your optic is ready to go on! This mount allows for mounting of any industry standard RMR footprint optic. We recommend using a small amount of blue loctite for installation of all the hardware. Ensure the expander screws are inserted until flush and snug, but do not over-tighten! We recommend tightening of the optic mounting screws to either 14in-lbs or to your optic manufacturer's specification, whichever is lower. The Glock mount is compatible with the following models: 9mm – G17,G19,G26,G34,G45 10mm Auto – G20,G29 .357 – G31,G32,G33 .40 SW – G22,G23,G24,G27,G35 .45 G.A.P. – G37,G38, G39 .45 Auto – G21,G30,G36,G41 This Glock dovetail optic mounting kit will not fit and is not suitable for the Glock MOS models! The Beretta mount is compatible with the following models: M9 M9 Exclusive M9A1 M9A3 M9A3 Black M9 22lr 92 Fusion Black 92 Fusion Blue 92 A1 92 Compact 92 Compact w/ Rail 92 Compact with Rail Inox 92 Vertec Inox 92FS 92FS Fusion 92FS Inox 92FS Brigadier 92FS Brigadier Inox 92G 92G-SD 92G Elite 92X Centurion 92X Compact 92X Compact w/ Rail 92X Full Size 98A1 98FS 98FS Inox 90 Series Inox This mounting kit will not fit and is not suitable for the following Beretta models (including but not limited to): ANY Beretta Optics Ready Models 92FS Centennial 92 Performance 92 Performance Defensive 92 RDO Compact M9A4 Centurion Taurus 92 Color: Black Material: 4340 Steel Kit includes: 1x Versa Tactical SightSecure™ optic mounting plate for rear sight dovetail 2x Expander screws 2x Optic retention screws 1x HEX driver

categories:Sporting GoodsGuns

29255 impressions

1135 views

2 full boxes of 45 auto rounds 1 partial box with 22 rounds 50 rounds in each box PPU FMJ 230 grain Will trade for 243 rounds

categories:Sporting GoodsGuns

3390 impressions

392 views

6 boxes Lawman Handgun Clean-Fire Training 40 S&W 180 Grain 4 boxes Lawman Handgun Clean-Fire Training 40 S&W 115 Grain frangable 45$ per box

categories:Sporting GoodsGuns

12044 impressions

539 views

had one lookng for another

categories:Sporting GoodsGuns

3194 impressions

248 views

45 acp cleaned brass $20 / 200 pieces 40 sw cleaned brass $30 / 200 pieces 38 special cleaned brass $20 /100 pieces 10mm cleaned brass $35 / 100 pieces 9mm not cleaned $20 / 1000 pieces 9mm cleaned/deprimed/sized $20 / 250 pieces 308 cleaned/deprimed/sized mixed $30 / 100 pieces 308 once fired mixed 20 / 100 pieces 6.5 cm once fired mixed $25 /50 pieces 30-06 once fired mixed $20 / 50 pieces 270 once fired mixed $20 /50 pieces 243 once fired mixed $20 / 50 pieces 7mm mag once fired mixed $35 / 50 pieces All brass mixed head stamps

categories:Sporting GoodsGuns

19911 impressions

571 views

Regular set $40 each. Carbide pistol set $80

categories:Sporting GoodsGuns

2711 impressions

131 views

Handgun reloading/factory ammo -45 ACP - 185pcs 200gf FMJ bullets - 45 ACP - 166pcs grass/primed 300 cci - 9mm - 22pcs 115gr FMJ bullets - 9mm - 155pcs 123gr FMJ bullets - 9mm - 218pcs  158.3 gram FMJ bullets - 9mm 12pcs 124gr bullets HP/XTP - 357 mag.- 124pcs loaded cast 158 SWC blue wax c/ag cci 550 + 26pcs used brass - 357 mag - 82pcs loaded 158gr SP blue dot cci 550, H-110-15g - 357 mag - 88pcs factory ammo 125gr JSP -38 SP - 62pcs loaded cast 158g, W231-3.5g, cci primers -.30 Mauser - 100pcs 7.62mm Tokarev factory ammo - .30 Mauser - 120pcs 7.62mm Tokarev factory military ammo Pickup in Leduc, AB

categories:Sporting GoodsGuns

3376 impressions

153 views

I have a mint Pedersoli 1804 Potsdam Musket (smooth bore) in .75 (calibre)It is in immaculate condition with no rust or pitting. As it is a flintlock, it is listed as an antique so, no PAL is needed to own or possess this musket. Asking $1,500.00. Offers welcome. Local deals are preferred as shipping will be quite expensive for the buyer. So, I've had several comments that Antique firearms DO require a PAL and that I'm crazy. Well I am crazy but not about this subject. FYI Criminal Code of Canada Section 84(1) antique firearm means (a) any firearm manufactured before 1898 that was not designed to discharge rim-fire or centre-fire ammunition and that has not been redesigned to discharge such ammunition, or (b) any firearm that is prescribed to be an antique firearm; (arme à feu historique) Regulations Prescribing Antique Firearms Prescription 1 The firearms listed in the schedule are antique firearms for the purposes of paragraph (b) of the definition antique firearm in subsection 84(1) of the Criminal Code. SCHEDULE (Section 1) Black Powder Reproductions 1 A reproduction of a flintlock, wheel-lock or matchlock firearm, other than a handgun, manufactured after 1897. Section 84(3) Certain weapons deemed not to be firearms ·         (3) For the purposes of sections 91 to 95, 99 to 101, 103 to 107 and 117.03 of this Act and the provisions of the Firearms Act, the following weapons are deemed not to be firearms: ·         (a) any antique firearm;

categories:Sporting GoodsGuns

3778 impressions

174 views

-9MM ammo, Speerly G2 GOLD DOT, 147 GR. Top of the line. Cabela’s (bass Pro shops has it for $29.99 per box of 50 rounds per box. I will sell mine for $24/BOX of 50 rnds, minimum order of 5 boxes each at 50 rounds =$120.00. -I Also have 1 box of 20 rnds @ $40. -would prefer local pick up straight west of West Edmonton mall about 10 blocks west on 87th Ave. - I also have 1 box of calibre 270 Winchester PowerPoint 150 grain, 20 rounds for $35. - all transactions are cash only, no E transfers. Good for rifles or pistols

categories:Sporting GoodsGuns

2420 impressions

95 views

Weatherby MODEL 307™ ALPINE™ MDT CARBON. 7mm PRC 2 boxes through, harvested one animal. Absolutely a dream to shoot, $4550 Can Ship https://www.corlanes.com/weatherby-307-alpine-mdt-carbon-7mm-backcountry-20.html Through years of innovation and testing, the Model 307 action features a bolt that was designed to have a tool-less disassembly which allows hunters and shooters to easily field strip their bolt if needed. The bolt is equipped with an M16 style extractor for positive extraction and reliable ejection. The Alpine MDT comes standard with externally adjustable TrigerTech field trigger and PEAK 44 picatinny rail. The Alpine MDT sits on MDT’s lightweight HNT26 Chassis System, which is their first purpose-built hunting rifle chassis. This stock provides all of the benefits one expects from a chassis system such as v-block bedding, adjustable length of pull, adjustable comb, and AICS magazine compatibility. Weighing in at just 26oz, the chassis is constructed of a magnesium alloy stock, carbon fiber forend, carbon fiber pistol grip, and carbon fiber buttstock. The forend has an integral ARCA rail for easy attachment to a tripod and a foldable buttstock for compact storage. Available in standard short and long actions, the Alpine MDT not only offers some of Weatherby’s historic magnum cartridges but is also available in some of the most popular cartridges on the market. The Alpine MDT is compatible with most after-market 700® platform parts, making it the most open platform in the Weatherby line-up. Proudly built at our headquarters here in Sheridan, WY.

categories:Sporting GoodsGuns

10247 impressions

510 views

I have a collection of drilling jigs, tools and parts for the building of black powder muzzleloaders: a left hand L & R flintlock lock, L & R single set trigger, tang bolts, lock bolts, eschutceon pins, tang bolts, inlays, slotted wood screws, brass and German silver inlay wire, brass side plates and castings, pistol trigger guard, trade gun buttplate, and other numerous small items. Priced out; everything would cost over $800.00

categories:Sporting GoodsGuns

3868 impressions

205 views

Browning High Grade 1 of 5000 Commemorative Auto 5 12 Gauge Produced in Japan in 1984, with the engraving done in Belgium by Fabrique Nationale. Single nickel bead sight, 12 gauge with a 2 3/4" chamber. 28 inch vent rib barrel. Satin gray receiver, with photo-etched and engraved scrollwork, game scenes and John Browning. Fancy walnut round knob pistol grip stock, with dot-bordered checkering on the forearm and wrist, 14" pull and FN/ Browning buttplate. Pal is a must and will be verified. No trades, thanks. Price is firm. Shipping is only available on buyers expense. Serious inquires only please. If the ad is up, it is available. Will not respond to townpost messager.

categories:Sporting GoodsGuns

11434 impressions

614 views

**SOLD** Detailed ad, please read before messaging.  Cross posted on GunPost with a Five Star rating and reviews.  Deal with confidence. Please include phone # and/or your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have for sale a new Savage Mark II FVT bolt action 22LR, the 21” heavy carbon steel barrel is button rifled and weighs 6lbs. It has a Peep Sight with changeable front sight inserts (see pic), user adjustable accutrigger, and a 5rd detachable magazine. I am the first owner of this new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** First Paid, First Served.
 Holds only with deposit. Delivery Negotiable. 
 Buyer pays for shipping costs and makes arrangements for payment. MANUFACTURER DESCRIPTION Raising the bar in 22 LR performance, the Savage Arms Mark II FVT offers user-adjustable AccuTrigger technology for crisp, customized trigger pulls. The 21-inch, heavy carbon steel barrel is button rifled and paired with a rugged, matte black synthetic stock. Weighing 6 pounds, the rifle has a 5-round detachable box magazine and peep sights. FEATURES * Button-rifled, 21-inch heavy carbon steel barrel * Rugged, black matte synthetic stock; peep sights * 22 LR chambering; 5-round detachable box magazine SPECIFICATIONS SKU - 28800 Purpose - Small Game, Target Shooting Barrel Contour - Varmint Barrel Finish - Matte Barrel Length - 21" (53.34 cm) Barrel Material - Carbon Steel Rate of Twist - 1:16" Barrel Threaded - No Pistol Grip - No Interchangeable Grip Panel - No Magazine Capacity - 5 Magazine Release - Ambidextrous Receiver Material - Carbon Steel Feed Type - Detachable Box Magazine Sights - Front Metal Sights - Rear Metal AccuStock - No Stock Pull Length - Min. 13.9" (35.31 cm) Stock Pull Length - Max. 13.9" (35.31 cm) Stock Material - Synthetic Stock Type - Varmint AccuTrigger - Yes Trigger Adjustable - Yes Trigger Pull Force - Min. 2.5 lbs (40 ounces) Trigger Pull Force - Max. 6 lbs (96 ounces) Length - 39.75" (100.97 cm) Weight - 6.12 lbs (2.78 kg)

categories:Sporting GoodsGuns

21798 impressions

557 views