1) Husqvarna Rear Sight Ramp & Elevator - $145.00 2) Husqvarna Elevator - $45.00 3) Husqvarna Front Sight Hood - SOLD 5) 6-48 Filler Screws (4) - Blue $20.00 6) 6-48 Pan Head Filler Screws (4) - Blue $20.00 7) 6-48 Filler Screws (4) - Stainless $20.00 8) 8-40 Pan Head Filler Screws (2) $20.00 9) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

60448 impressions

3021 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. These are brand new and unused. Several available. Rangeview Sports sells these for $51 + tax. My price = $40 223/5.56 crimped 10/20 round mags. Canadian compliant LAR-15 Pistol Magazine. Legally hold 10 rounds. Get yours while you still can. 410 Alloy Stainless. Steel Heat treated. Coated Black. The 10/20s mags offer benefits in terms of maneuverability and ergonomics, especially when shooting in prone or other shooting positions. $40 each. Will ship at buyer's expense but priority will be given to local sale in Calgary.

categories:GunsSporting Goods

40946 impressions

1574 views

Looking for a mint condition Ruger Number 1 RSI/ Ruger No. 1/ Ruger# 1 preferably in Stainless Not too picky for the caliber Tag: Ruger Number 1, Ruger No. 1, Ruger No 1, Ruger# 1

categories:GunsSporting Goods

4702 impressions

224 views

Frankford Arsenal bullet press $300 and stainless steel pin brass cleaner $250 Brand new. Used once

categories:GunsSporting Goods

14001 impressions

343 views

NOT for SALE - LILJA Warranty reference only. MAY 7, 2024 - Fifth anniversary. News Update; By acquiring a quality bore scope, I was able to see the problem with barrel. The rifling lands in front of the chamber had separated from barrel for about 1.25" and 1 land was protruding into bore. Cut off 2" of barrel chamber end. Machined new barrel end to fit receiver tighter by .002" and rechambered for 22 short only. At range gun shot 1/4" - 5 shot group at 50 yds. shooting CCI 22 short - 27 gr. HP. Seems the rifling is not shot out but can not understand rifling land separation. UNIQUE -- NO WARRANTY or REFUND from LILJA. Call phone or e-mail only. No messages. Aug. 27/24: Over the past 3 years I just added 3817 rds. of CCI 22 shorts to round count. Still shooting 1/4" groups at 50 yds.

categories:GunsSporting Goods

217593 impressions

17827 views

Tikka T3x 7mm REM Mag Stainless Limbsaver MDT 20 MOA rail MDT Elite Rings Sterk Swept Bolt handle and shroud Bushnell Elite 4500 4-16x50 Unfired Over $3,000 invested. $2,400 firm.

categories:GunsSporting Goods

7526 impressions

321 views

Just got in 454 Casul Rossi M92 carbines stainless steel .NEW holds nine rounds.will shoot a 300 gr. Bullet at 2000 fps. 20% more power than 44 magnum. you can also use 45 long, colt ammunition. all fire I’m 15% off all ammunition 20% off.

categories:GunsSporting Goods

70387 impressions

5279 views

As of 2024-12-05, this product is no longer available for sale. Next expected availability October 2025. Stay strong Canada! Shipping across Canada included, *Email only please* 1 Part - $25 Shipped 2 Parts - $35 Shipped 3 Parts - $45 Shipped 4 Parts - $55 Shipped (Full Upgrade) *+$10 for the Low Profile Front Optic Rail **Any combination of the parts are available ***EMT is King Shipping via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design/invention/product) Double Tap Trigger Over Travel Limiter - Replaces the Factory Trigger Spring Plunger - Reduce the Over Travel by 85% for Quick and easy "Double Taps" - Material: Precision Machined Stainless Steel Extended Charging Handle - Replaces the Factory Charging Handle - 50% Longer and Knurled Finish for Easy Access - Material: Black Anodized Aluminum Extended Magazine Release Button - Replaces the Magazine Release Button - Larger Textured Protruded Release Button for Easy Access and Quick Magazine Change - Material: Black Anodized Aluminum Barrel Mounted Optic Rail - Mounts on the Barrel (Replaces Factory Rear Sights) - Prevents Optics from Losing Zero from Take Down - Rail Height is the same as the Receiver - Optional 3rd Mounting Hole. Rail can now be mounted forward/backwards 1/2". *Only 2 of 3 screws is sufficient for mounting. - Material: Black Anodized Aluminum Low Profile Front Optic Rail M-Lok - Mounts on the M-Lok handguard - Rail Height is the same as the Receiver - Designed to fit most front backup sights (BUS) secured via a single screw - 2x M-Lok Screw/Nut included - Black Anodized Aluminum

categories:GunsSporting Goods

159705 impressions

13813 views

Prices A- Double Tap Trigger Over Travel Limiter - $20 B - Aperture Ghost Ring Sights Set - $20 C/D - Extended Magazine Release (Right and Left Handed) - $25 **$5 off each additional part for any order combo (2 or more) **Ex. A+B=$35-($5 discount)=$30 Total **A+B+C=$20+$20+$25=$65-2*($5 discount)=$55 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) Double Tap Trigger Over Travel Limiter - $20 Replaces the Factory Trigger Spring Plunger Reduce the Over Travel by 85% for Quick and easy "Double Taps" Machined Stainless Steel Aperture Ghost Ring Sights Set - $20 Replaces the Factory Open Sights Comes in a Set of Two (Large/Small Apertures) 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm) 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) Material: Precision Machined Stainless Steel Finish: Matte Black Oxide (Blued) Weight: 0.02oz (0.4g) **Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached** *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* Extended Magazine Release (Right and Left Handed) - $25 Replaces the Factory Magazine Release No Snag Design (Tab only on one side) Ergonomic Quick Index Finger Mag Release Compatible with the Charger Pistol Material: Precision Machined Aluminum Finish: Matte Black Anodize Weight: 0.56oz (16g) **Not compatible with older Metal Trigger Groups** **Mag Release does not fit certain aftermarket Archangel Stocks**

categories:GunsSporting Goods

56322 impressions

2375 views

Lightly used Savage BVSS Varmint Hunter in 308 Win. More of a bench shooter than a long distance gopher gun but quite a nail driver. All Stainless Steel with the AccuTrigger & a heavy laminated stock. Some light scuffing to the laminated stock from the previous owner but its basically scuffed varnish. $1250 plus shipping but I would prefer a local (Edmonton Area) sale.

categories:GunsSporting Goods

7671 impressions

449 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Can hold for a non-refundable deposit. Can also do a payment plan.  Popular and hard to find Marlin 1895 SBL (45-70) 1 also have 336 SBL (30-30) available. Fit and finish is excellent on these Ruger mades. Don'1 settle for a Remlin. Tariffs and poor exchange rate have increased the cost significantly for these rifles. Then add sales tax on top of that. You get a brand new in box rifle. Comes with evervthing it does from factory including hammer spur, manual and cable lock. Price is $3,250 for one rifle. Your choice of either 45-70 or 30-30. I also have a Limited Edition SBL with green laminate furniture in 45-70 ($3,800). • Grey laminate stock with polished stainless finish • 19” cold hammer-forged stainless steel threaded barrel • High-visibility tritium fibre optic front sight, adjustable ghost ring rear sight Will ship at buyer's expense but priority will be given to local sale in Calgary. No trades. If you contacted me via email, check your junk/spam folder for my reply email. Some people have notified me that it was going to that folder.

categories:GunsSporting Goods

75880 impressions

3473 views

2) Ithaca High Standard Elevator - .850" W x 1.00" L - $30 3) Elevator X - .104" W x 0.89" L - OAL = 1.65" - $35 4) Cooey Elevator - .075" x 1.21" - $15 5) Husqvarna Elevator - $45 6) Marble Double Step - Rifle Elevator - $35 7) Marble Double Step - Carbine Elevator - $35 8) Marlin Elevator M1 - Marlin S-25 Sight - .046" W x 1.60" L - $35 9) Marlin Elevator M2 - Marlin S-25 Sight - .055" W x 1.60" L - $35 10) Marlin Elevator (336 - 1894 - 1895) - .115"W x 1.43"L - SOLD 11) Marlin Early Fishhook Elevator- .075" W x 1.22" L - $35 12) Marlin Elevator - Marlin S-27 Sight - .095" W x 1.15" L - SOLD 14) Remington 98 1/2 Sight - 105 Elevator - Round Barrel Model 12 Rifles - $45 15) Remington "R" Elevator (701 1/2) - .057" W x 1.11" L - SOLD 16) Savage Folding Sight Elevator - .061" W x 1.13" L - $40 17) Savage Fishhook Elevator - $40 18) Savage 1899 Elevator - .095" W x 1.05" L - OAL = 1.27" - SOLD 19) Savage 99 Elevator - .095" W x 1.15" Lo - $40 21) Savage 24 Elevator (Replacement Style) - $25 22) Win Early Elevator - $40 23) Winchester 1A Elevator - dated (.207") - $60 24) Winchester 1B Elevator - dated (.162") - $60 25) Winchester 1C Elevator - no date (.175") - $60 28) Win 2C Elevator - .60"W x 1.625"L - $35 29) Winchester 3C - 6S Elevator - $50 - 31) 6-48 Filler Screws (4) - Blue $20.00 32) 6-48 Pan Head Filler Screws (4) - Blue $20.00 33) 6-48 Filler Screws (4) - Stainless $20.00 34) 8-40 Pan Head Filler Screws (2) $20.00 35) DT-1 - 3/8" DT Filler - Blue - Curved Top - $45.00 36) DT-2 - 3/8" DT Filler - Stainless - Curved Top - $50.00 - 40) Husqvarna Front Sight Hood - $85 41) Marlin pre 72 Round Front Sight Hood - $45 42) Marlin post 72 Front Sight Hood - $60 43) Sako - Finnwolf Hood - $85 44) Browning (Japan) BLR - BAR Front Sight Hood - SOLD 45) Parker Hale Front Sight Hood - $85 46) Browning (Belgium) Safari Front Sight Hood - $85 47) Winchester Model 9422 Front Sight Hood - $40 48) Winchester post 64 Model 94 Front Sight Hood - $40 49) Winchester pre 64 Model 94 Front Sight Hood - $40 50) Winchester Model 70-88-100-64-65 Front Sight Hood - $40 51) Winchester post 64 Model 70 Front Sight Hood - $75 52) Winchester post 64 Model 70 Front Sight Hood (Long) - $85 53) Winchester (97 Sight - Model 69) Front Sight Hood - $75 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

195457 impressions

2755 views

Thompson Center Arms .50 caliber Thunder Hawk In-line rifle has a tapered round 1" to 7/8" x 21" stainless steel barrel with light handling marks to the finish. The bore is shiny and the rifling overall is good and sharp. It has a 1:38 twist and a mounted weaver rail. Bullet loads up to 150grn There are factory mount holes to install a ring-type set up. The Rynite stock has a checkered wrist and forend. The stock has a rubber recoil reducing pad and sling swivel studs. The firing mechanism is set up for the #11 percussion cap or 209 primer and has an outside manual bolt position safety. Length of pull is 14", the overall length is 39", weight is 5.4 lbs. CFP/RCMP courtesy of Bill C-71 and JT will require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Private sales do not require any information about the firearm. Private sales do not require any information about the firearm. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code. Valid PAL required. Will ship on your dime. ANY ATTEMPT TO INQUIRE IF A PURCHASE CAN BE MADE WITHOUT A VALID AND CONFIRMED PAL WILL RESULT IN AN AUTOMATIC POLICE AND CFP CENTER REPORT. DON'T WASTE MY TIME WHICH MAY GET YOU TIME!

categories:GunsSporting Goods

104189 impressions

8993 views

S&W Model 1100071. New in Package . 11 inches OAL. 6 inch blade. Black oxide coated 8 Cr13Mov stainless . Partially serrated Tungsten glass breaker pommel. Includes sharpening stone and ballistic nylon sheath . Polymer handle.

categories:Camping and Survival GearSporting Goods

5122 impressions

469 views

Nickel finish steel shaft baton conceals a 18.5 inch ridged spike blade. Other end has a bright flashlight with twist on/off activation . Brand New in box . Unique item.

categories:Camping and Survival GearSporting Goods

2484 impressions

289 views

Stainless Tikka T3 in 300 Win Mag. The radial brake really helps with the recoil but it’s also removable (thread protector included) if you don’t want it on for hunting. Plus it’s bedded in a beautiful laminate thumb hole stock which really straightens things out. It’s a pleasure to shoot which is hard to say about most 300 mags. Double swivels on the front so it’s perfect for mounting a bipod and a sling. Very accurate as Tikkas usually are. Just reducing the collection to what I can shoot more often. Shipping available. 

categories:GunsSporting Goods

4625 impressions

550 views

Ruger Scout 308 - Left Hand Ruger Scout Rifle - Stainless / Laminate Includes removable flash suppressor Detachable box magazine x 2 Rear and front iron sight on Picatinny Rail Burris 2.75 x 20 Scope Tactical rifle bag Hoppe's bore snake

categories:GunsSporting Goods

1163 impressions

121 views

Browning A-Bolt Stainless in 300 RUM 26" barrel, factory camo stock Muzzle brake and thread cap. Good condition, has some scuffs in the metal Scope is NOT included. $1050.00 Shipping is extra!

categories:GunsSporting Goods

7136 impressions

490 views

Nice Browning A-Bolt Camo Stainless 22-250 Rem 22" barrel, good condition Talley rings, Leupold VX-5 HD, 3-15 $2500.00 Can separate for a sale. Rifle $995.00, scope $1600.00 Shipping is extra!

categories:GunsSporting Goods

4626 impressions

213 views

MEDIUM HEIGHT VERY GOOD CONDITION

categories:Tools and Equipment

2655 impressions

312 views

1) Sako - Tikka Rear Sight - (0.56" / 9/16" C-C) - $195.00 2) Sako - Tikka - Blade Rear Sight - 1 screw - $225.00 3) Sako - Tikka - Front Sight w/ Sight Insert & Screws (1.2" / 30mm C-C) - $275.00 4) Sako - Tikka - Front Sight Ramp w/ Sight Insert, Hood & Screws (1.2" / 30mm C-C) - $350.00 5) Sako Front Sight Ramp (2 screws) - without Sight Insert (0.75" C-C) - $75.00 6) Sako 85 Front Sight Hood - $85.00 7) Sako / Browning Front Sight Hood - $85.00 8) Sako AIII - Finwolf Front Sight Hood - $85.00 10) 6-48 Filler Screws (4) - Blue - $20.00 11) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 12) 6-48 Filler Screws (4) - Stainless - $20.00 13) 8-40 Pan Head Filler Screws (2) - $20.00 14) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

91242 impressions

3577 views