Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 34 mm/1.35” Length: 108 mm/4.25” Weight: 154 g/5.4 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11197 impressions

393 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 24.5 mm/1” Clearance: 3.4 mm/.133" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 134 g/4.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10259 impressions

392 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 147 g/5.2 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10938 impressions

465 views

Brand new The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2. Made from precision cast black Melonite™ finished steel and compatible with both mil-spec and commercial-spec carbine receiver extensions. Features: Accepts any push-button QD sling swivel as well as the Magpul QDM Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Works with both mil-spec and commercial-spec carbine receiver extensions (buffer tubes) NOTE: The ASAP QD is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, and MOE® Rifle Stocks.

categories:Sporting GoodsGuns

5373 impressions

437 views

Selling because cash is tight and I have another - don't miss your chance to add this beautiful investment to your collection. This superb Webley WG Army specimen was made by P. Webley & Sons circa 1896 chambered in .476 Eley and .455 Webley, and sold by the famed John Rigby & Co. in London. Established in 1775, John Rigby & Co remains to this day a staple of the fine firearms market. Their role in this piece's history adds even further to collector value. These revolvers were very popular private purchases among sportsmen and higher ranking officers around the turn of the 20th century up through WW1 as reliable, accurate, and elegant handguns. With an impressive 6" barrel and mirror-bore rifling, this is a collector's or target shooter's dream. I can add a box of 50 factory new Fiocchi Heritage .455 Webley rounds with purchase of the revolver if you have a PAL. If you don't want these rounds, take $100 off asking price. As a pre-1898 antique, this can be owned and used without any registration or headaches. Visually this revolver retains most of its original shiny dark blue finish with scattered minor loss from 130 years living. The trigger, hammer, ejector, cylinder release mechanism, and hinge screw have a shiny silver "in the white" finish giving a proud and bold contrast. The original checkered square bottom hardwood grips are solid, showing some minor dings and a tiny chip on the right. Sharply stamped "WG Army Model" on the top strap with calibers ".455/.476" Webley and Eley, and the W&S winged bullet logo on the left of the frame. The barrel is hand etched with the retailer address "JOHN RIGBY & Co. 72 ST JAMES'S St LONDON S.W.". The serial 13XXX places manufacture in the mid-late 1890s and makes this one of the most modern antiques you can get. The bore retains shiny, strong rifling with scarce patches of wear. The action functions excellent in single and double action, leaving nothing to be desired. The cylinder indexes and locks up with almost no wiggle for reliable firing and the timing is excellent. Comes with FRT antique papers and repro leather Webley holster. Can come with box of Fiocchi .455 Webley ammo if you have a PAL. Call any time or local meetup Calgary or Vancouver depending where I am. Ships Canada No PAL, 18+ Check my ads for more antiques! I make no claims about the safety of shooting ANY antique. Check with your gunsmith! (Tags: England, Britain, French, MAS, German, Reichs, American, Canadian, Dominion, .44, .45, .450, .476, ACP, Auto, Boxer, Kynoch, Smith & Wesson, Remington)

categories:Sporting GoodsGuns

24288 impressions

1271 views

Antique status Swiss 1882 manufacturered by Waffen Bern. One of the most sought after antiques, this revolver is chambered in 7.5 Swiss ordnance which is still available from Fiocchi. This revolver is commonly used with .32 sw longs, although the cases may bulge. S&B .32 longs is not recommended as the case rims are smaller than normal and may cause light strikes, all other brands are functional. The revolver itself is in very good condition, lockup and timing are tight. The bore is shiny as most of these revolvers are. Bluing is in good shape. The gun comes with a custom western quick draw holster that is formed to the gun, with the standard right hand attachment point or the holster can be swapped to the left side for a reverse draw set up. Pick up available, shipping included with insurance on buyer. Good pistol for bushwhacking and ranch carry. The gun will also come with a copy of the frt and a hard case. Please inquire if you need more pictures. Cash or etrasfer only. No pal required, just proof of over 18 Please check with a gunsmith before firing any antique firearm for the first time

categories:Sporting GoodsGuns

4947 impressions

232 views

Not your average x bolt Skip fluted “heavy sporter” hand lapped 26” barrel Spiral fluted bolt True carbon fiber stock 20moa browning base NO SCOPE,RINGS, BIPOD, SLING- RIFLE AND RAIL ONLY!! Recoil hawg brake with tool and cap Under 150 rds through it Comes with whatever ammo I have left at the time (likely 6-8 boxes) plus a shwack of once fired brass(mostly hornady) Shoots lights out, 1/2 moa 2400obo in BC Pls text first

categories:Sporting GoodsGuns

14044 impressions

1054 views

BNIB HBI-10237-01 Buyers pay the shipping, contact me for an estimate. CZ Bren 2 Handguard 13.8″ M-Lok (GEN 2) The HBI 13.8″ handguard for the Bren 2 MS is ideal for 14″ barrel models in both 556/223 and 7.62×39 calibers. Our 13.8″ handguards are designed to truly “free float” the barrel and provide the operator with over 3x the support hand area and over 7x the M-Lok positions as compared to the factory Bren 2 MS handguard. PEQ-15/ATPIAL type IR sight systems and peripheral switches are easily mounted out front above your support hand thanks to a full length continuous 1913/picatinny top rail. Our extended Bren 2 MS handguards feature a window at the gas block that has been carefully designed to allow operator access to gas system adjustments while in use. The gas block window is bridged with a removable 1913 plate. With the 1913 plate removed, the gas block and regulator are exposed for complete disassembly and cleaning. This two piece design allows access to the gas system without having to remove the handguard shroud from the weapon. Additionally, the use of two countersunk screws to secure the 1913 plate means that sighting systems mounted the to 1913 plate WILL retain zero when the plate is removed/reinstalled after cleaning. Every handguard includes an integrated QD mounting plate system for seamless sling integration on either the left or right side. Additionally, we are proud to offer a direct mount light variant compatible with Surefire® 300/600, StreamLight® Protac Rail, Modlite 18650 series, and other popular bodies. The simple and robust mounting design replaces a single M-Lok position with body specific mounting geometry for weapon lights. This light mounting solution offers the simplest, lowest profile, lightest weight, and arguably most rigid light body integration at no additional cost. If your application requires a weapon light, you might want to consider this option. Features 13.8″ M-Lok Handguards for the CZ Bren 2 MS Gen 2 Two Piece Design With Direct Access to Gas Regulator M-Lok Accessory Interface, Full Length 1913 Top Rail QD Mounting Plate Included Optional Direct Mount Light Geometry for select Surefire® and StreamLight® Bodies Total Weight Installed is 12.04 oz (Factory Bren 2 MS Pistol Handguard is 10.27oz) Machined Aluminum 6061, Anodized MIL-A-8625 Type 3 Hard Coat Multiple Patents Pending Designed and Manufactured completely in USA. 922r Compliant.

categories:Guns

9400 impressions

621 views