Brand new  Semi auto Non restricted Caliber: 12 gauge Capacity: 5+1 Chamber: 3" Barrel length: 18.5" Overall length: 40" Color: Black Operating System: ARGO Piston-Driven Sights: LPA Ghost Ring Rear, Adjustable Stock: Adjustable, Synthetic, Pistol Grip Choke: Modified Length of Pull: 14-3/8" Weight: 7.8 lbs. Part #: 11707 10 year manufacturer's warranty Made in Italy

categories:GunsSporting Goods

365 impressions

29 views

Brand new  Pump action Non restricted Stock Type:  ATI Shotforce Top Folding Stock Magazine Capacity: 5+1 Caliber/Gauge: 12 Ga Sight: Bead Cross bolt safety Dual extractors Twin action slide bars Interchangeable barrels compatible with Mossberg 500 Barrel:  Smooth Cylinder Bore Barrel Length: 18-1/2″ Chamber Length: 3″ Overall Length: 39.5" Pull Length: 14" Weight: 6 lb Made in USA

categories:GunsSporting Goods

2819 impressions

132 views

Brand new Pump action Non restricted Caliber: 12 gauge Chamber: 3" Barrel:  15″  Capacity: 4+1 Stock: Synthetic  Coming with: Fixed stock Scabbard 4 Rounds Sidesaddle shotshell carrier Parts#K61258 Made in Turkey

categories:GunsSporting Goods

1003 impressions

42 views

Iam selling my 1951-R SKS which is in immaculate condition. This one was used as a parade model with very little wear on the gun. This gun is all matching number. Original everything the stock was sanded but very lightly still can see all markings. The barrel has immaculate rifling. I would say this is my best shooting rifle that i own with picture proof. I would like to get $ 1400 or best offer No trades No low ballers because i will not sell it i would rather keep it. thanks 403-470-4450

categories:GunsSporting Goods

2137 impressions

158 views

Hello, I just traded for a 300prc so trying to move my  300wsm Sako 85 Action trued/squared Sako Trigger set at 1lb 3oz McMillan A3 stock bedded Benchmark fluted barrel 26"  1-7 twist  shot less then 50 times 30 and 34mm scope rings 2 magazines 9- hornady cx 180gr(ammo) 25-hornady eldx 200gr(ammo) 200- once fired norma brass 200- new lapua brass 300- hornady cx 180gr bullets Redding type s match dies $4400 for gun, clips, and rings $5500 for everything  Would consider trades on optics Located in Calgary 

categories:GunsSporting Goods

3388 impressions

122 views

Seeking: SKS whole gun without stock, hopefully really cheap or complete gun <$300 Mauser barreled actions, or complete receiver. $100-200? .22 w/i $150  12 gauge pump or semi w/i $200 or projects project gun welcomed too (no missing action parts. missing/broken handguard or stock, even missing sights is ok) Prefer local

categories:GunsSporting Goods

120009 impressions

5810 views

Winchester Model 1200 – 20GA pump-action shotgun in excellent condition. Smooth action, clean metal, and fine wood furniture. 25.5" barrel, pre-1968. $500 OBO Serious inquiries welcome.

categories:GunsSporting Goods

2274 impressions

193 views

Weatherby PA-08 chambered in 20 Gauge In excellent condition About 200 rounds through it 2-3/4” and 3” 28” barrel Comes with 3 chokes (M, IM, F) and choke key Will include a soft case

categories:GunsSporting Goods

8276 impressions

293 views

Brand new  Pump action Non restricted Gauge: 12 Gauge Chamber: 3" Chamber with 1.75" Short Shell, 2.75", and 3" Cycling Capability Capacity: 4+1; 5+1; 8+1 Sights: Bead Barrel Length: 14.375" Choke: Cylinder Bore Barrel Type: Matte Blue Stock: Raptor Bird’s Head Pistol Grip Overall Length: 26.37" Length of Pull: 13.875" Weight: 5.3 lbs. Made in USA

categories:GunsSporting Goods

9598 impressions

396 views

Brand new  Pump action Non restricted Caliber: 12 gauge Chamber: 3" Capacity: 5+1 Barrel length: 14.4" Weight: 5.75lb Full Length: 26.37" Part #: 50653 Made in USA

categories:GunsSporting Goods

8369 impressions

470 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

16114 impressions

541 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

14125 impressions

354 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

14566 impressions

292 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

25637 impressions

892 views

Howdy Townpost. I have here a nicely restored Cooey Model 82. I got the gun as an oil stained and sporterized target .22. It's had the stock nicely refinished in a satin urethane finish done in the fashion to mimic an old oil finished stock. The stock has a pretty nice grain pattern on the underside of it (pictured). The bore is excellent. The stock had a chunk out of it to accomodate a Lyman peep-sight and the receiver was drilled and tapped for it as well. That has all been repaired (pictured) and is hardly noticeable now. There was a hairline crack near the middle barrel band that was filled too. It probably wasn't necessary to fill especially on a .22 , but hey she's been filled. It has all the C-broad arrow markings present. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

20788 impressions

766 views

Howdy Townpost. I've a neat old single shot 12 gauge made by Savage. It has a nice and light tenite stock that was sanded at one point to give it a matte finish. The shotgun is very tight and not off the face at all. The gun is very light and handy sitting 5.73lbs. It has a 12 gauge 2 3/4in, 28in full choke barrel. The patent number is molded into the plastic stock interestingly enough. The black paint on the trigger guard is flaking of a little. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's pretty short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

17237 impressions

833 views

Wow, here is an opportunity to own something truly unique. Overall condition, very good.  Make: MFG FRANCAIS D'ARMES & CYCLES DE ST ETIENNE Model: Joesph Dumonthier Cane Gun Caliber: 9MM FLOBERT RF (have ammunition 50 birdshot, 50 bullets.)  Bore: Very Good, Shiny Comes With: Brass and Lead Muzzle Cover, Steel Butt Stock Action: Single Shot Rimfire Cane Gun  No sights, brown tapered steel barrel, engraved blued receiver, smooth curved horn grip, removable brass plug which allows threaded blued steel shoulder stock to be attached. Metal finish shows some scratches, handling marks and wear. Grip shows some marks, scratches and wear.  Barrel Length: 31"  Serial: 18921 Canadian Antique, No PAL Required Can ship anywhere in Canada, Please see my other ads for rare and collectible, firearms and accessories.

categories:GunsSporting Goods

10094 impressions

386 views

*Price reduction fro a quick sale* This is a High Condition 1944 BSA selected to be upgraded into a "T" pattern sniper rifle with correct "TR" marking on the left side of receiver ring. These sniper rifles were based on hand selected No. 4 rifles and saw service with Commonwealth forces during WWII and into the 1960s. In addition to the rifle's standard protected blade front sight and ladder rear, Scope is a No. 32 Mk. II OS. 1650A & mounted on a quick detach base. Scope is dated 1944 and numbered "15803"which is matched to the rifle with the same number force matched on the wrist(see photo). Cast scope base is a high quality reproduction(Roger Payne replica) and was Matched 3522 to same as on the bolt and rifle. Walnut stock with cheek piece, "S51" also stamped behind the grip indicating the rifle is a wartime conversion by famed gunmaker Holland & Holland. CONDITION: Very Good. Metal retains the vast majority of its arsenal applied finishes with some fading. Stocks show small nicks and impressions throughout as is to be expected on military issue arms. Good, strong grooves and bright bore. Scope is original and is still very clear for it age. Also included as an original green metal scope case for securing the scope. However, the numbers on this case are not matching the scope.. Barrel Length: 25 - 1/2" Caliber/Bore: .303 BSA Model: No. 4 MK 1* (T) Serial Number: D3522. Also comes with a Chest S.A. No15 Mk1 - Transit Chest for the Lee Enfield No 4T Sniper Rifle. Overall I would give the condition a 9/10. This world make an excellent addition to any collection. This is truly the Rolex of British sniper rifles!) If you are looking for something very rare only 21,617 rifles were converted by Holland and Holland from 1942-1946. Can ship anywhere in Canada, Please see my other ads for rare and collectable firearms and accessories

categories:Sporting Goods

11782 impressions

977 views

Wow, here’s something that you don’t see everyday an Enfield-manufactured Lee-Enfield No. 1 Mk. III bolt-action shotgun. 25" barrel with bright bore chambered 410 Musket. Full-wood stock that comes with a detachable magazine! (Usually missing and single shot with a wooden block). Comes with period correct canvas sling. Factory open sights. Finish off your Enfield collection with this beautiful piece or add it in. This one is unique! Bayonet add $225* * I will except payments if needed Will Ship anywhere in Canada,

categories:GunsSporting Goods

87012 impressions

3271 views

This Shotgun stamped twice with US Flaming Bombs with letter P proof mark, possibly a training shotgun, serial number outside of estimated range of Riot guns. Brass bead, blued finish, round barrel. Two piece wood stocks, takedown model with checkered forearm and pistol grip, brown rubber recoil pad, also comes with M1 combat sling. Wear: Metal finish shows some scratches, handling marks and wear. Stocks show some marks, scratches and wear. Make:STEVENS US MILITARY Model: 620-A Caliber: 12 G X 2 3/4" | Choke(s): Fixed Cylinder Choke Bore(s): Excellent Can ship anywhere in Canada, Please see my other ads for rare and collectible, firearms and accessories.

categories:GunsSporting Goods

60604 impressions

1382 views

Remington Semi Auto 12 gauge, 3" chamber, 25" barrel shotgun. Model # is 11-87. Shotgun is used very little, wood work and bluing look brand new, serial # puts it at 30+ years old. Comes with full, modified and imp. cylinder chokes, as well as soft case, magazine plug and a few spare piston o-rings. Lookin for: Pending / Sold

categories:GunsSporting Goods

1083 impressions

122 views