Okotoks Buy and Sell

Please contact (587) 837-1415

I have 4 adorable chihuahua puppies for sale. 3 males and 1 female (2males are longhaired) located near Rocky Mountain House ab. They will have had their first set of shots and ready to go to their new home next week. Message me if you have further questions 4038446833

Pure King German Shepherd for Sale • Age: One year • Breed: Pure King German Shepherd • Color: Black and Gold • Health: Fully vaccinated • Features: Strong build, intelligent, loyal, and perfect for guarding or as a family companion. He is in excellent health and highly active. • Behavior: Family-friendly, easy to train, and obedient. For more details or to view the dog, please contact us.

Bought this set to upgrade my RCBS set but found I prefer the Redding dies. Only used the FL size die for a few rounds to try it out. Comes also with seating and taper crimp die. Willing to ship ($18 flat rate box). Located in Turner Valley.

Selling .38 rimfire ammunition from estate sale. Cartidges were stored in case, bullet facing down. 5 for $37.50 or buy all 55 pieces as a lot for $395 Will Ship

Good condition m44 for sale in Calgary se call or text 5878768254 Note small stock repair on butt stock

* Can hold for a non-refundable deposit. Can also do a payment plan. Tariffs, poor exchange rate and tax puts new retail price for these at around $3200. Brand new in box. It has only been function fired by Marlin before leaving the factory  as with all Marlin rifles. Comes with everything it does from factory including: - Hammer spur - Stock spacers to adjust LOP - Ammo quiver for stock storage - Cheek riser with spacers Will ship at buyer's expense but priority will be given to local sale in Calgary. 

Only 1 remaining. Can hold for a non-refundable deposit. Can also do a payment plan. Brand new in box. I only took it out of the box to inspect. It has only been function fired by Marlin before leaving the factory as with all Marlin rifles. Comes with everything it does from factory including a hammer spur. I also have a new in box Marlin Dark in 30-30 ($3600). Will ship at buyer's expense but priority will be given to local sale in Calgary. No trades.

Can hold with a non-refundable deposit. Brand new unfired. Will ship at buyer's expense but priority will be given to local sale in Calgary.

Looks new Browning Citori CXT . Less than 300 shots fired. Cleaned after each use. 30” barrel. Comes with original box and accessories. Including 3 original Browning chokes (Full, Modified, Improved Modified ). Located in Calgary for local deal and able to ship with insurance anywhere in Canada. PAL and RCMP verification is required.

Howdy Townpost. I'm selling some of my tin hoard. All of these ingots were cast from pewter mugs, plates, cups, candleholders etc. I included a few pictures of examples I melted into ingots. I'm currently asking $20/lb. The ingots are in Calgary, AB for local sales or shipped anywhere nationwide on buyer's dime (I can do flat rate $20 for up to 11lbs).

Howdy Townpost. I got another batch of these sight adjustment tools ready to go. These are made from forged steel and work well for lots of simple drift type front sights. As pictured is the tool being used on my Type 81M. You simply loosen the bolt with a wrench or socket and then you can adjust your windage with the tool by threading or unthreading it to either the left or right. The tool also has a female type slot in the top for adjusting AK/SKS/Type 81 type front sight posts by threading the sight up or down to adjust the sight elevation. Overall a pretty simple and handy tool to have for not a lot of money. The tools are located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide at buyer's expense. I can ship these as over-weighted lettermail so I'll ship for them $3 nationwide, unless you prefer I ship them as a parcel which will cost $12-18 for faster shipping.

Howdy Townpost. I've got some nice brand new Peltor EEP-100's for sale. I got this mixed in with some other stuff I bought and was pleasantly surprised to find that the previous owner had never used these. They were in the sealed white box and the the rubber ear plugs were clean, unused and still in their original plastic bag. So they're brand new. The picture on the box is a screenshot the Amazon.ca listing and it's still currently sitting at $266+tax today on the same listing. These Earplugs are located in Calgary AB for pickup. I can also ship them nationwide on buyer's dime, $18 at most. I could also ship these lettermail for $4 if I get rid of the cardboard box and put the contents in a mailer.

The ammo is located in Calgary AB for pickup. I can also arrange shipping if need be.

Howdy Townpost. I scavenged some parts for my own Type 99 and this is what is left that I don't need. The guard is pitted and rough shape on the outside. The rust was cleaned off but the pits remain. It's still perfectly functional and the internals are in actually decent shape. The part is located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide at buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $17.84 flat rate.

Howdy once again Townposters. I've got another batch of Glockazines (the official industry used professional gunsmith term) for sale. They're brand new. These are 15 round magazines that are properly pinned to 10 rounds as per Canadian regulation. With the rivets recessed and are below flush to not interfere with magazine dimensions. These are decent polymer construction American made magazines and they fit in my Glock pattern pistols (P80 G17 & PSA Dagger a Gen. 3 Glock clone) well. These mags will fit in most of the double-stack 9mm Glocks, aka the Glock 19, 26, PSA Dagger and other Glock clones etc. or any of the pistol caliber carbines that use Glock mags. Such as the Ruger PC9, Kel-tek Sub2000, Kriss Vector etc. Current stock: 20 left I am firm on my prices. The mags are located in Calgary AB, and can be picked up anytime. I am also able to ship nationwide on buyer's dime. I typically use flat rate boxes as they're almost always the cheapest method to ship mags. They start at $17.84, and go up to about $27.

Howdy once again Townposters. I've got another batch of Glockazines for sale. These are 18 round magazines properly pinned to 10 rounds as per Canadian law. With the rivets recessed and below flush to not interfere with magazine dimensions for feeding and loading. These are decent polymer construction American made magazines and they fit in my Glock pattern pistols (P80 G17 & PSA Dagger a Gen. 3 Glock clone) well. These mags will fit in any of the double-stack 9mm Glocks, aka the Glock 19, 17 26 etc., as well as any of the pistol caliber carbines that use glock magazines Kel-tek Sub2K, Ruger PC9, Kodiak Defence K9's JR Carbines etc. Current stock: 47 The mags are located in Calgary AB, and can be picked up anytime locally. I am also able to ship nationwide on buyer's dime. Shipping starts around $12 for nearby locations example: Strathmore AB or Cheadle AB. Otherwise nationwide shipping is flat-rate $17.84 through Canada Post.

Howdy Townpost. I've got a batch of my bullet lube made up and I'm looking to sell it since I don't need as much as I produced here for just myself. I had a buyer who wanted some bullet lube and I volunteered to make some for him and I wanted some for myself as well. After a fair bit of research and some testing I've come up with a bullet lube that I'm pretty happy with. It smells like coconut and even works as a decent lip balm. This is a primarily lamb tallow and beeswax based lube with some coconut oil added to make it to a softer consistency so if can be worked into cap and ball cylinders by hand. The lamb tallow keeps the lube shelf stable so it shouldn't go rancid just sitting on a shelf. The beeswax was from some 100% beeswax candles I got from a now defunct BC based bee farm. And the coconut oil was raided from my girlfriends pantry (don't tell her). This lube can be used as is by hand or with a plastic butter-knife on muzzleloaders. Or remelted for pan lubing or poured directly into a lubri-sizer reservoir and left to harden, or used on unlubed wads or patches and left to dry. I can cast these into lubri-sizer sticks upon request if need be. This bullet lube will also work for smokeless powder bullets too. Use of this lube will do 3 things. Reduce leading in your barrel. Keep fouling soft. Which makes loading and cleaning up after much easier. And in many cases improve accuracy. The lube comes in a resealable container in one of 3 sizes. The prices are $5, $15 and $20 respectively. The larger containers are a better value. The lube is located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide at buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $17.84 flat rate.

Howdy Townpost! I've gotten my hands on some stubby steelies! These are new production Yugoslavian military patterned magazines made in Croatia. These are well made and the milling was done well too. These are all properly pinned to 5 rounds. And are nice for hunting with a shorter mag or hauling it around with a shorter and lighter mag when compared to standard a 5/30 rounder. These magazines will also work with an AK magazine coupler (I have these for sale for $20). Which for an SKS-D some plastic on the coupler must be removed first. The M10X should work with a coupler without issues the same goes for the WK-181 and modded mags in the Type-81. These can be modified to fit into a Type-81. I also have modded mags for sale which are $55 each. I am the only seller who has these Croatian 5/10's in Canada. Even the crappy Gen.1 KCI 5/10's are out of stock practically everywhere in Canada. This is a limited run, so don't miss out. The mags are $40 each. The mags will come in a plastic bag in preserving oil that can be easily cleaned up with any degreaser or simply hot water and dish soap in your kitchen sink with a quick scrub and then dried. It's a good idea too to apply a light coat of gun oil. A single drop rubbed across the entire mag is enough. These mags will fit in the SKS-D, the M10X series, and they might require some hand fitting to work in the WK-181, since Kodiak designed those things with odd magwell dimensions with PMAGS in mind. In all likelihood though, they will work out of the box for you. The magazines are located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $18.89 flat rate. If you order more than 6 mags, shipping will be $21. If you want to order a large amount 10+ shipping will definitely be more.