Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

13838 impressions

349 views

Howdy Townpost. I have here a nicely restored Cooey Model 82. I got the gun as an oil stained and sporterized target .22. It's had the stock nicely refinished in a satin urethane finish done in the fashion to mimic an old oil finished stock. The stock has a pretty nice grain pattern on the underside of it (pictured). The bore is excellent. The stock had a chunk out of it to accomodate a Lyman peep-sight and the receiver was drilled and tapped for it as well. That has all been repaired (pictured) and is hardly noticeable now. There was a hairline crack near the middle barrel band that was filled too. It probably wasn't necessary to fill especially on a .22 , but hey she's been filled. It has all the C-broad arrow markings present. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

20443 impressions

744 views

Brand new Non-restricted Caliber: .44 Mag Action: Lever-Action Capacity: 7+1 Front Sight: Blade (Fixed) Rear Sight: Picatinny Rail + Peep Sight Barrel Length: 16.5" Threaded Stock: Fixed Synthetic Handguard: M-LOK Rail Finish: Black Overall Length: 37.5" Weight: 6.8 lbs. Made in Brazil  

categories:GunsSporting Goods

5093 impressions

232 views

Brand new Non-restricted Caliber:  .30-30 Win. Capacity: 5 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Blued Steel Barrel: 20" Round Blued Steel Front Sight: Brass Bead Rear Sight: Fully Adj. Semi-Buckhorn w/ Diamond Insert Scopeability: Drilled and Tapped Scope Mount Type: Weaver 63B Stock Material: American Walnut Buttplate: Black Solid Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:12 Overall Length: 39" Weight: 7.00 lbs. Made in USA

categories:GunsSporting Goods

10265 impressions

569 views

Brand new Non-restricted Semi-Auto Caliber: .308 Winchester Barrel Material: AISI-SAE 4140 ( 42CrMo4) Barrel Finish: Melonite Receiver Material: 7075 T6 Aluminium Alloy Magazine Capacity: 5 Rnd. Removable Magazine Barrel Length: 20" Operation: Gas Operated Semi Automatic Safety: Trigger Block Sight: Adjustable Fiber Optic Sights Length: 42" Weight: 6.6 lbs Front Fixed Sight Rear Adjustable Fiber Optic Sight Pic Rail Integrated Cross Bolt Trigger Safety Swivel Studs Coming with: 2 magazines Made in Turkey

categories:GunsSporting Goods

15871 impressions

1698 views

This Ross rifle bayonet was converted to a PCMR knife during World War II and issued to rangers to protect the West Coast of Canada as they were expecting an invasion from Japan. I don’t see these too often and they do offer something unique for your collection. Can ship anywhere in Canada, Please see my other ads for collectable military items.

categories:CollectiblesHousehold Items

223 impressions

53 views

Well, if you had to survive and you could only pick one rifle, this would be the one,  lightweight, 10 round magazine, canvas  sling included. Everything works as it should. This is a nice clean rifle for your collection. The  also has strong rifling.   Can ship anywhere in Canada, Please see my other ads for rare and collectible, firearms and accessories. 

categories:GunsSporting Goods

9223 impressions

344 views

This is an original U.S. WWII-era M15 Rifle Grenade Launcher Sight mounting plate, (also referred to as the M15 sight or grenade launching sight), complete with its accompanying War Department technical bulletin (TB 23-30-1, dated March 13, 1944) providing installation and usage instructions. The square metal piece in your photos (the black rectangular plate with two screw holes, partially unwrapped from the preservative paper) is the mounting plate (also called the base plate or bracket) for the WWII U.S. M15 Rifle Grenade Launcher Sight. Its purpose: •  It permanently attaches to the left side of the rifle’s wooden stock (on the M1 Garand, M1903 Springfield, or M1 Carbine) using two special wood screws (included in the kit).

categories:Sporting Goods

2287 impressions

68 views

This bayonet is in used condition with most of the finish on the blade is missing. The scabbard has rust/ pitting. For a Lee Enfield mrk3 no1 rifle Can ship anywhere in Canada Please see my other ads for rare and collectable military accessories

categories:CollectiblesHousehold Items

1787 impressions

199 views

This bayonet is in high condition has a little bit of grease on the tip of the metal I can easily be wiped off. No rust or pitting. For a Lee Enfield mrk3 no1 rifle Can ship anywhere in Canada Please see my other ads for rare and collectable military accessories

categories:CollectiblesHousehold Items

1583 impressions

208 views

Iv got a box of 50 tops and bottom helmet screws. Please contact me for availability. buy the whole box of 50 or $25 dollars each! * only a few box’s left $450 obo Can ship anywhere in Canada, *Please see my other adds for Collectable Rifles, Ammo & Accessories.

categories:GunsSporting Goods

41309 impressions

905 views

Clear optics, German crosshair type reticle, blues finish, 1” tube, includes claw mount scope rings & bases for drilling shotgun. Can Ship anywhere in Canada, *Please see my other adds for Collectable Rifles, Ammo & Accessories.

categories:GunsSporting Goods

68088 impressions

3040 views

20 rounds of 30 Remington AR 150 grain. I can ship anywhere in Canada. *Please see my other adds for Collectable Rifles, Ammo & Accessories.

categories:GunsSporting Goods

44444 impressions

1305 views

RICASSO MARKED: "U.S.M.C.", OTHER-SIDE MARKED: "CAMILLUS, N.Y.", LEATHER WASHER GRIP, METAL POMMEL, NO VISIBLE MARKINGS, BLACK LEATHER SCABBARD, NO VISIBLE MARKINGS, BLADE APPROX. 7" & OAL APPROX. 12". Can Ship Anywhere, Please see my other Collectable Accessories and Rifles.

categories:Camping and Survival GearSporting Goods

13444 impressions

1225 views

SESQUICENTENNIAL COMMEMORATIVE OAK FITTED RIFLE CASE, (1) OAK FITTED SESQUICENTENNIAL COMMEMORATIVE RIFLE CASE, 1936 - 1986, LOCKABLE WITH KEY. SEE PHOTOS Can ship anywhere in Canada, Please see my other adds for rare and collectible rifles and accessories.

categories:GunsSporting Goods

43205 impressions

1761 views

Brazilian Model 1908 Mauser Rifle unissued 116 years old! Excellent pre WW1 German craftsmanship and quality. Manufactured under contract to Brazil, left side of the receiver stamped DEUTSCHE WAFFEN-UND/MUNITIIONSFABRIKEN.BERLIN. The right side of the chamber stamped MOD.1908. Complete with bayonet and brass mounted leather scabbard. Excellent un-issued condition. All original matching numbers. 7mm Mauser. Can Ship Anywhere in Canada, Please see my other collectable rifles and accessories.

categories:GunsSporting Goods

60327 impressions

1720 views

FITS LEE ENFIELD NO.4 RIFLES & MKV STEN MG'S, RICASSO MARKED: "NO. 7 MKI / L", CROSS-GUARD MARKED WITH BROAD ARROW, BROWN COMPOSITE GRIPS, METAL POMMEL MARKED WITH BROAD ARROWS, METAL SCABBARD, BLADE APPROX. 8 1/8" & OAL APPROX. 12.5" Can ship anywhere in Canada Please see my other ads for rare and collectable firearms, accessories, and ammunition

categories:Camping and Survival GearSporting Goods

12910 impressions

1031 views

These are extremely rare and very hard to find. This comes with the scabbard in metal as well as the bayonet, of course in good condition. This is meant for the number 4 rifle. I can ship this anywhere, Please see my other items for rare and collectible, firearms and accessories

categories:GunsSporting Goods

20358 impressions

540 views

As you can see these boxes are complete and in very good condition. $110per box Can ship anywhere in Canada, Please see my other ads for rare and collectable rifles and accessories.

categories:GunsSporting Goods

41314 impressions

814 views

Extremely hard to find but now you have!) $95each. Can ship anywhere *Please see my other adds for Collectable Rifles, Ammo & Accessories.

categories:GunsSporting Goods

37974 impressions

1135 views

*Price reduction fro a quick sale* This is a High Condition 1944 BSA selected to be upgraded into a "T" pattern sniper rifle with correct "TR" marking on the left side of receiver ring. These sniper rifles were based on hand selected No. 4 rifles and saw service with Commonwealth forces during WWII and into the 1960s. In addition to the rifle's standard protected blade front sight and ladder rear, Scope is a No. 32 Mk. II OS. 1650A & mounted on a quick detach base. Scope is dated 1944 and numbered "15803"which is matched to the rifle with the same number force matched on the wrist(see photo). Cast scope base is a high quality reproduction(Roger Payne replica) and was Matched 3522 to same as on the bolt and rifle. Walnut stock with cheek piece, "S51" also stamped behind the grip indicating the rifle is a wartime conversion by famed gunmaker Holland & Holland. CONDITION: Very Good. Metal retains the vast majority of its arsenal applied finishes with some fading. Stocks show small nicks and impressions throughout as is to be expected on military issue arms. Good, strong grooves and bright bore. Scope is original and is still very clear for it age. Also included as an original green metal scope case for securing the scope. However, the numbers on this case are not matching the scope.. Barrel Length: 25 - 1/2" Caliber/Bore: .303 BSA Model: No. 4 MK 1* (T) Serial Number: D3522. Also comes with a Chest S.A. No15 Mk1 - Transit Chest for the Lee Enfield No 4T Sniper Rifle. Overall I would give the condition a 9/10. This world make an excellent addition to any collection. This is truly the Rolex of British sniper rifles!) If you are looking for something very rare only 21,617 rifles were converted by Holland and Holland from 1942-1946. Can ship anywhere in Canada, Please see my other ads for rare and collectable firearms and accessories

categories:Sporting Goods

11582 impressions

965 views