7mm in Okotoks

Free classifieds to buy, sell, and swap items in Okotoks, Black Diamond, and the surrounding area.
Ads within
of

Okotoks

Photo of MDT magazine Metal Short Action AICS
$85.00
MDT magazine Metal Short Action AICS
MDT Magazine Metal short action AICS 308win / 6.5 Creedmoor 12 round on binder Plate 2.960 Max COAL These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard. Available with or without the front binder plate. See details below for benefits and limitations of each version. DETAILS MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction. SPECIFICATIONS * 3.055” Outside Length * 2.870” max cartridge overall length (COAL) with binder plate * 2.960” max cartridge overall length (COAL) without binder plate (see limitations below) * 4.61” Rear Height COMPATIBILITY These magazines will need to be slightly modified to function with Howa 1500 SA rifles. * 308WIN * 6mm Creedmoor * 243WIN * 260 Rem * 6.5 Creedmoor * 7mm-08 Win * 308/7.62x51 NATO * 22 - 250 Rem (will work at a reduced capacity) BINDER PLATE DETAILS * The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”. * The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below).
categories:Sporting Goods
10291 impressions
261 views
Calgary, AB1 week ago
Photo of ANTIQUE (no PAL) Compact RARE Galand 7mm / .32 Smith & Wesson Short Model 1868 Revolver
$1650
ANTIQUE (no PAL) Compact RARE Galand 7mm / .32 Smith & Wesson Short Model 1868 Revolver
This is a functional scarce and unique Antique Galand Model 1868 single and double action Revolver. Designed for 7 mm Perrin which gives it antique status, this revolver happens to accept the nearly identical .32 S&W short cartridge which can be reloaded at a low cost, and can even be made from cut down .32 S&W Long brass. There are very few antiques that will accept this caliber, so this is a lucky find. Unlike most antiques which are big and heavy, this is a small frame and compact revolver which still shoots a reliable round. Overall length is 7 inches. Mechanics are fair, with a working action in both single and double action. The hammer is strong and indexing is reliable. The rifling is still strongly defined down the 3" barrel, with evenly scattered patches of inactive oxidation from black powder use. The Galand patented mechanism involves a very unique lever which pulls the barrel and cylinder straight forward while ejecting spent shells. All components of this work fine. As a revolver that's a century and a half old, some wear and wiggle is evident in the lever and hinge mechanism, but it still works consistently and properly. Visually this revolver has an even gray/blue surface with some bits of lustre showing beyond the aged patina. No significant pitting is evident, though scattered dings and scratches are present. The grips are solid, with the left one showing an old crack that could be pretty easily stabilized and closed back up. No PAL, 18+ Ships Canada Check my ads for more antiques. I make no claims about the safety of shooting ANY antique! Check with a gunsmith.
categories:GunsSporting Goods
10068 impressions
560 views
Calgary, AB3 months ago
Showing 21 of 67 records