This is from the estate of my late father in law, who was an avid gun collector. No this is not in pristine museum quality condition. Prices reflect condition. Offers may be considered, but low ballers will be ignored or told to F off. If you don't like the price keep scrolling.. Never been fired

categories:GunsSporting Goods

8433 impressions

330 views

1) Win post 64 M70 Rear Sight w/ 2 screws - $135.00 2) Win post 64 M70 Front Sight w/ Insert, Hood & Screws - $175.00 3) Win post 64 Model Front Sight Hood - Short (only) - $75.00 4) Win post 64 Model Front Sight Hood - Long (only) - $75.00 5) Win post 64 Pistol Grip Cap with Red "W" Insert - 0.735" x 1.16" - $100.00 6) Win post 64 Pistol Grip Cap "W" Insert Only - 0.735" x 1.16" - $75.00 7) Winchester Pistol Grip Cap Scroll Insert Only - $30.00 --- 21) Win pre 64 M70 - 22G Rear Sight w/o Elevator - $275 22) Win 3C - 6 Step Elevator - $50 23) Win pre 64 M70 Folding Rear Sight - .47" H - $100 24) Win pre 64 M70 - Front Sight Insert - $75 25) Win pre 64 M70 - Front Sight Hood - $40 26) Winchester Marksman - Target Stock - Sling Swivels - $150.00 27) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (without Pins) - $155 28) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (with Pins) - $175 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

47572 impressions

899 views

Left handed Savage, comes with Calibre Specific Cabelas scope installed. Most accurate gun I’ve owned, I’m just getting old and have a lot of pain in my elbows and looking to get an ultra light gun which I’m hoping will be easier on me. Shoots best with the Remington Core-Lokt 130 grain ammo, but I haven’t tried a higher grain with it. Located in Lacombe, AB. I could possibly meet you in Red Deer, Calgary or Edmonton at some point if need be.

categories:GunsSporting Goods

1616 impressions

322 views

Offered for sale as I am l no longer reloading 9mm.  I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***

categories:GunsSporting Goods

1300 impressions

79 views

DEPRIMED AND TUMBLED - About 20 or so were fired twice while developing a load.......offered for sale ( case-gards included ) as I no longer shoot 9mm.    I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***

categories:GunsSporting Goods

1211 impressions

66 views

 Just found some shell holders,  in the back of the bottom drawer of my loading bench, for a Lee Hand Primer ( which I haven't had for over 30 years ), and which are no longer useful to me for reloading. There are only these six shell holders remaining ..... #s 1,3,4,12,14 & 18 complete with plastic case which has room for 6 more.   I am willing to ship at buyer’s expense ( dependent upon CPC's strike rotations ), or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.      ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

3550 impressions

118 views

Offering 7 various shell holders for $ 7.50 each or $50.00 for all of them. These are for calibers which I no longer reload and some of them were rarely used.....I have listed them by make and number and the caliber for which " I used them " , but most will also be usable and  are listed in the charts for dozens of other calibers:  RCBS # 22 for .43 MAUSER  ,  LYMAN # 3 for 7.62x39  ,  LYMAN # 13 for 300 WEATHERBY MAG  ,  LYMAN # 19 for .30 CARBINE  ,  LYMAN # 15 for 8MM MAUSER  ,  RCBS # 17 for .32 ACP  ,  Unmarked ( LEE ? )# 9 which was for 44-40 WIN. & .44 MAG. Please consult an online, or your own,  Shell Holder Cross Reference Chart to satisfy yourself and verify, what cartridge they will fit.  I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.        ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   *** 

categories:GunsSporting Goods

3993 impressions

127 views

I received this in my Christmas stocking last year ( for a gopher shooting accessory ) but never was able to use it,  having sold my gopher rifle the month before......a good deal for someone who shoots .223 or a similar rifle.    I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.        ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   *** 

categories:GunsSporting Goods

2520 impressions

73 views

OFFERING A VINTAGE ( circa 1900 ), UNION METALLIC CARTRIDGE COMPANY ADVERTISING TARGET......measures 5 1/2" x 4 1/4"..... EXCELLENT CONDITION !!! I am willing to ship at buyer’s expense by letter mail, , or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there or enroute for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

19401 impressions

660 views

NEVER USED...... received as a Christmas gift many years ago ( very much appreciated ) but never used , as it was never part of my BP cartridge shooting regimen, which always worked just fine as it was. Note the rubber sealing ring.....good Buffalo Arms quality item.....total length approx. 19 1/4 inches. I am willing to ship at buyer’s expense ( dependent upon CPC's strike rotations ) , or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

11401 impressions

467 views

Custom built metal stand to hold presses, powder measures, etc. It can be bolted or clamped to a bench or table to bring your equipment to a comfortable working height. The tubular steel is 5 inches in diameter with a 7 inch diameter base and overall height of 10 inches which has been powder coated in black. The weight is 4 lbs. 12 oz. PLEASE NOTE - the sale is for the STAND ONLY and the press is NOT INCLUDED. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

28277 impressions

1400 views

At a bargain price.....one new , unopened pack of 3 bronze bore brushes in .25 caliber which I no longer need as I no longer have my 25-20 Winchester. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

13782 impressions

391 views

16 oz. reloading room/range accessory, which keeps your coffee hot or " other beverage " cold while you are reloading or at the range ..... bought a few of these at a gun show in Denver in the year 2000 but this one was never used, so is in excellent condition. If you have your own pictures, you can unscrew the bottom, remove the photo sheet as a template and replace it with your own pictures. I'm not sure who made it, but the bottom is marked patent pending and matches some of my early Starbucks bottoms that were ( and still are ) all made in China----BOTTOM MARKED " do not microwave" and " hand wash only" also like the Starbucks tumblers and in the same script. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

21732 impressions

606 views

Previous sale cancelled due to non payment.....Still 0ffering straight sided, paper patched ( .4035 to .4045 ) medium hardness 8/9 which were very accurate in my original 40-70 and 40-50 sharps rifles. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

10578 impressions

522 views

Offering an "almost new" ( only used 4 times ) .44 mag / spl resizing die with ring spacer.....please note this is a steel and NOT carbide. Years ago when I hit age 75 , case lubing suddenly became a chore so I purchased individual carbide resizing dies for all my die sets and just recently found this one in my junk box ......a good deal for someone in need of a good die in "like new" condition. I am willing to ship at "BUYER'S EXPENSE" , or offer local pick up. I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

7192 impressions

231 views

Winchester, Browning, Colt - Dates of Manufacture - Pocket Books Winchester Dates of Manufacture 1849 - 1984 - 1 of 1000 - George Madis (1984) (Red Cover) - Signed by Author $100.00 ---- Winchester Dates of Manufacture 1849 - 1984 - 1 of 1000 - George Madis (1984) (Brown Cover - 1st Edition) - Signed by Author $125.00 ---- Browning Dates of Manufacture 1824 to Present - George Madis (1988) - Signed by Author $100.00 ---- Colt Dates of Manufacture 1837 - 1978 - R.L.Wilson (1985) $75.00 --- All 4 Books bought together ---> $300.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

32481 impressions

589 views

1) Win post 64 Pistol Grip Cap with Red "W" Insert - $100.00 2) Win post 64 Pistol Grip Cap "W" Insert Only - 0.735" x 1.16" - $75.00 3) Win post 64 Pistol Grip Cap with Scroll Insert - $100.00 4) Winchester Pistol Grip Cap Scroll Insert Only - $30.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

28530 impressions

615 views

Ten point HCA-095 Evo-X scope. Never mounted comes with everything you see, just don’t need at the moment 275obo located in Red Deer

categories:GunsSporting Goods

4477 impressions

273 views

Box of reloaded 45acp bullets x 50, small primer pockets. Pick up in Red Deer

categories:GunsSporting Goods

1300 impressions

168 views

Looking for a KRISS Vector in 9mm, prefer the white or camo, but any will do Looking for Local Red Deer Area

categories:GunsSporting Goods

1788 impressions

96 views

Looking for A crusader Arms templar with the ACR stock, with or without the trigger tech trigger Looking for Local Red Deer area

categories:GunsSporting Goods

1137 impressions

75 views