Left handed Savage, comes with Calibre Specific Cabelas scope installed. Most accurate gun I’ve owned, I’m just getting old and have a lot of pain in my elbows and looking to get an ultra light gun which I’m hoping will be easier on me. Shoots best with the Remington Core-Lokt 130 grain ammo, but I haven’t tried a higher grain with it. Located in Lacombe, AB. I could possibly meet you in Red Deer, Calgary or Edmonton at some point if need be.

categories:GunsSporting Goods

1646 impressions

326 views

Offered for sale as I am l no longer reloading 9mm.  I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***

categories:GunsSporting Goods

1307 impressions

81 views

DEPRIMED AND TUMBLED - About 20 or so were fired twice while developing a load.......offered for sale ( case-gards included ) as I no longer shoot 9mm.    I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***

categories:GunsSporting Goods

1216 impressions

67 views

 Just found some shell holders,  in the back of the bottom drawer of my loading bench, for a Lee Hand Primer ( which I haven't had for over 30 years ), and which are no longer useful to me for reloading. There are only these six shell holders remaining ..... #s 1,3,4,12,14 & 18 complete with plastic case which has room for 6 more.   I am willing to ship at buyer’s expense ( dependent upon CPC's strike rotations ), or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.      ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

3555 impressions

120 views

Offering 7 various shell holders for $ 7.50 each or $50.00 for all of them. These are for calibers which I no longer reload and some of them were rarely used.....I have listed them by make and number and the caliber for which " I used them " , but most will also be usable and  are listed in the charts for dozens of other calibers:  RCBS # 22 for .43 MAUSER  ,  LYMAN # 3 for 7.62x39  ,  LYMAN # 13 for 300 WEATHERBY MAG  ,  LYMAN # 19 for .30 CARBINE  ,  LYMAN # 15 for 8MM MAUSER  ,  RCBS # 17 for .32 ACP  ,  Unmarked ( LEE ? )# 9 which was for 44-40 WIN. & .44 MAG. Please consult an online, or your own,  Shell Holder Cross Reference Chart to satisfy yourself and verify, what cartridge they will fit.  I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.        ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   *** 

categories:GunsSporting Goods

4009 impressions

128 views

I received this in my Christmas stocking last year ( for a gopher shooting accessory ) but never was able to use it,  having sold my gopher rifle the month before......a good deal for someone who shoots .223 or a similar rifle.    I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.        ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   *** 

categories:GunsSporting Goods

2529 impressions

74 views

OFFERING A VINTAGE ( circa 1900 ), UNION METALLIC CARTRIDGE COMPANY ADVERTISING TARGET......measures 5 1/2" x 4 1/4"..... EXCELLENT CONDITION !!! I am willing to ship at buyer’s expense by letter mail, , or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there or enroute for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

19405 impressions

660 views

NEVER USED...... received as a Christmas gift many years ago ( very much appreciated ) but never used , as it was never part of my BP cartridge shooting regimen, which always worked just fine as it was. Note the rubber sealing ring.....good Buffalo Arms quality item.....total length approx. 19 1/4 inches. I am willing to ship at buyer’s expense ( dependent upon CPC's strike rotations ) , or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

11405 impressions

468 views

Custom built metal stand to hold presses, powder measures, etc. It can be bolted or clamped to a bench or table to bring your equipment to a comfortable working height. The tubular steel is 5 inches in diameter with a 7 inch diameter base and overall height of 10 inches which has been powder coated in black. The weight is 4 lbs. 12 oz. PLEASE NOTE - the sale is for the STAND ONLY and the press is NOT INCLUDED. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

28281 impressions

1401 views

At a bargain price.....one new , unopened pack of 3 bronze bore brushes in .25 caliber which I no longer need as I no longer have my 25-20 Winchester. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

13786 impressions

392 views

16 oz. reloading room/range accessory, which keeps your coffee hot or " other beverage " cold while you are reloading or at the range ..... bought a few of these at a gun show in Denver in the year 2000 but this one was never used, so is in excellent condition. If you have your own pictures, you can unscrew the bottom, remove the photo sheet as a template and replace it with your own pictures. I'm not sure who made it, but the bottom is marked patent pending and matches some of my early Starbucks bottoms that were ( and still are ) all made in China----BOTTOM MARKED " do not microwave" and " hand wash only" also like the Starbucks tumblers and in the same script. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

21738 impressions

606 views

Previous sale cancelled due to non payment.....Still 0ffering straight sided, paper patched ( .4035 to .4045 ) medium hardness 8/9 which were very accurate in my original 40-70 and 40-50 sharps rifles. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

10583 impressions

522 views

Offering an "almost new" ( only used 4 times ) .44 mag / spl resizing die with ring spacer.....please note this is a steel and NOT carbide. Years ago when I hit age 75 , case lubing suddenly became a chore so I purchased individual carbide resizing dies for all my die sets and just recently found this one in my junk box ......a good deal for someone in need of a good die in "like new" condition. I am willing to ship at "BUYER'S EXPENSE" , or offer local pick up. I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

7196 impressions

231 views

Ten point HCA-095 Evo-X scope. Never mounted comes with everything you see, just don’t need at the moment 275obo located in Red Deer

categories:GunsSporting Goods

4478 impressions

273 views

Box of reloaded 45acp bullets x 50, small primer pockets. Pick up in Red Deer

categories:GunsSporting Goods

1301 impressions

168 views

Looking for a KRISS Vector in 9mm, prefer the white or camo, but any will do Looking for Local Red Deer Area

categories:GunsSporting Goods

1792 impressions

97 views

Looking for A crusader Arms templar with the ACR stock, with or without the trigger tech trigger Looking for Local Red Deer area

categories:GunsSporting Goods

1138 impressions

75 views

Unopened pot of buffer. Pickup in Red Deer

categories:GunsSporting Goods

1129 impressions

196 views

Hello, I am a licensed PAL instructor in Alberta teaching the Non Restricted CFSC in Red Deer, Alberta. I offer firearms range shooting and training sessions at the Red Deer Shooting Centre (RDSC) or your range of choice. Here are approximate costs for the RDSC for a rough idea: $169.50 for 1 hour, one rifle and one handgun + ammunition cost $189.50 for 1 hour, any three firearms + ammunition cost $244.50 for 2 hours, two rifles and two handguns + ammunition cost Firearms to rent include an SKS Tactical Kit, Kodiak WK180C, GSG MP40, A variety of shotguns, Norinco Semi Auto 9mm Handgun, Tokarev Semi Auto 7.62x25 Handgun and more! Please contact me by phone, text or email if you are interested. Tyson Shearer CFSC Instructor 403-877-1250 tyson@precisionapproachsupply.com

categories:GunsSporting Goods

44272 impressions

2678 views

Length 54 inch x 13 inch x 4 inches thick, with spunge inside, can take at least two rifles with scopes. Has four snap clips and two places to lock. Pick-up in Red Deer is free.

categories:GunsSporting Goods

2107 impressions

226 views

Located in Red Deer Scope is in great condition, have rings for it as well. 403.597.8820

categories:GunsSporting Goods

1503 impressions

318 views