Used for a couple seasons. Honestly one my favorites but looking to get into something else. Comes with 6 mags, blank firing adapter to safely empty the tank if needed. Extra cap if you lose one on a mag. Sight adapter, etc. Shipping is on you. Can get a quote once we work out the details.

categories:Sporting GoodsPaintball and Airsoft

821 impressions

178 views

Antler handled muzzleloader short bullet starter The shortest piece of wood is worn but still works. $10.00   Thanks, Phil

categories:Sporting GoodsGuns

2630 impressions

93 views

Antique Copper Powder Flask Brass powder dispensing mechanism and spout, which works properly Removable brass spout Measures 6 ¾” Long and 3 ½” wide at widest portion No visible makers information The flask is missing solder on the bottom and both sides and needs to be repaired before it could be used. An interesting collector piece, sure to generate lots of conversation. There is something small inside which rattles when shaking the flask.  This may be some of the missing solder or possibly small clumps of powder.   $45.00   Thanks, Phil

categories:Sporting GoodsGuns

3027 impressions

103 views

Dixon & Sons Early 19th Century Copper and Brass Powder Flask Adjustable spout but missing set/stop screw Measures 7 ¾” Long and 3 ¼” wide at widest portion Original brass flask by Dixon and Sons. An uncommon flask design with a heavy copper body. This is common size flask for servicing a rifle or fowler. Seams are all-intact and the dispensing valve works correctly. Has a number of dents in body.  Seams are intact. Collectible or a nice complement to your original rifle or fowler. $75.00   Thanks, Phil

categories:Sporting GoodsGuns

2393 impressions

80 views

246 transfer case out of a 2003 Siera 2500 extended cab that was written off with front end damage Had a 4L60 transmission with a 6 litre engine A friend knew I needed one so he found this one and guaranteed it would work with my serial # Well I took it to a garage / Tonka in Edmonton to have it installed and the splines were different so I ended up buying a rebuilt for $1700 This one has 27 splines and I needed 29 The front drive shaft goes with it I

categories:Auto and TrailersAuto Parts

368 impressions

51 views

10C or 77 will work as well and preferably a metal one

categories:Sporting GoodsGuns

2126 impressions

78 views

For sale is my used Tikka T3X Lite stainless in 6.5 Creedmoor. 22.4" barrel, comes with 20 MOA MDT scope rail. Exactly 40 rounds fired, in very good condition. Local deal preferred. Must have valid PAL for transfer. Text or email works best.

categories:Sporting GoodsGuns

4809 impressions

325 views

Motorcycle 2009 Yamaha V-Star 1300 Blue for sale. 29,337 km. Perfect condition, works great. Price $5,700 OBO

categories:Auto and TrailersMotorcycles

576 impressions

69 views

Works like new, Volcano hybrid digital vaporizer comes with all attachments and most accessories. 3 mouthpieces,bag attachment, whip/hose attachment, concentrate smoking attachment, make your own bag mouthpiece,dosing containers and container filler, extra screens and air filter. Only thing you will need are bags or a new whip hose

categories:Household ItemsElectronics

442 impressions

110 views

Savanna Well Servicing is hiring! We are looking for an experienced Journeyman Mechanic to join our team in Leduc, AB. General Statement of Duties: The Journeyman Mechanic is responsible for maintaining, repairing and troubleshooting mechanical systems and equipment used on service rigs.  The ideal candidate will have specific expertise and knowledge of service rig operations, equipment and a commitment to safety & industry standards. Must be willing to work on-call, overtime and weekends based on business needs.  Work is based in Leduc, AB. However, offsite support may be required as our rig operations are located in remote areas across AB and BC. Candidate must be willing to travel to remote rig locations on an as needed basis. Required Education & Experience: Must be a licensed Journeyman Mechanic/Heavy-Duty Mechanic Relevant industry experience, preferably at least 3-5 years Strong understanding of diesel engines, hydraulic systems, and rig-specific machinery Proficient in the use of hand tools, diagnostic equipment, and specialized rig equipment CVIP experience considered an asset Valid Driver's License and transportation Valid industry certifications (e.g. H2S Alive, First Aid, etc) Must be capable of lifting and carrying heavy equipment, as needed What does Savanna offer? - Competitive Pay - Family Health & Dental Benefits - Company Matched Employee Savings Plan - Great team environment Send your resume to: swsrigjobs@savannawellservicing.com (Subject line: Mechanic)

categories:Business and ServicesJobs

2848 impressions

139 views

We are looking for a reliable candidate who is available to start immediately Duties: Perform cleaning tasks such as vacuuming, mopping and sanitizing surfaces. Clean and disinfect bathrooms, kitchen etc. Keep all rooms clean, tidy and presentable Change bed linen on each bed once a week (2beds) Empty bins and remove waste Job: Part time Duration: 3 Times is week Hours: 3 ~ 4 hours per day There is an opportunity for a permanent role, depending on performance and commitment

categories:Business and ServicesJobs

1574 impressions

164 views

Foldable powerchair. Fits in a lot of car trunks. Airport approved for travel. Great in/out doors. New motors, tires, computer, and tons of extras. I'm upgrading that's all. Batteries work great as well. Comes with two chargers.

categories:Medical Equipment

555 impressions

101 views

Our Cane Corso puppies are almost 10 weeks old and are already showing the intelligence, confidence, and loyalty this remarkable breed is known for. Raised in a hands-on home environment, these pups are being actively potty trained and well-socialized from an early age, giving them a great foundation for an easy transition into their new homes. The mother is on site and can be seen, showcasing the strong build, calm temperament, and protective nature Cane Corsos are prized for. Puppies can go home with or without shots, depending on the new owner’s preference. If you’re looking for a devoted family companion, guardian, or working dog with excellent potential, these Cane Corso puppies are an exceptional opportunity. Let us know which pups catches your heart and we may hold them for you with a $200 deposit. Contact eight two five seven three six zero two seven seven for more info.

categories:Pets and AnimalsDogs

5776 impressions

285 views

**PRICED 4QUICK SALE** Selling Grandma's must see mint, solid, rust-free and well maintained 2018 Nissan Pathfinder SL 4X4 loaded with all the power options just 1 owner and there are absolutely no issues of any kind. Everything works as it supposed to as a Pathfinder should with the current low mileage of just 144,XXXKMs and definitely will go 300,000+km or more in its present condition. This Pathfinder is also very competitively priced to other units of the same year, KMs and condition so why over pay when you can put that savings towards Gas, Insurance or other daily living expenses" Interior is pretty mint and detailed on a regular basis. No Rust, No Rips, No Stains, No Tears No Pets.. ⭐Comes With⭐ 3.5 Litre V6 Engine/ 4x4/ Tow Package Intelligent Cruise Control Heated Steering Wheel Lane Departure Assist Blind Spot Warning Black Interior (Absolutely Mint) Remote Starter + 2 sets of Keys and fobs Bluetooth, Cd player + AUX & USB Connections Power Driver & Passenger Seats Heated Driver & Passenger Seats Backup Camera + Touchscreen interactive display Independent Rear Climate Control GPS Navigation Tow Package with hitch connection Roof Rack Owners Manuals 80% All-Season Tires (On Rims) Full-Size Spare Tire Stow-N-Go Folding 2nd & 3rd Row Seats Air-Conditioning blows like an Alberta Winter Heater Blows like the Sahara Chrome Grill Fog lights, New Alternator & Battery Synthetic Fluid changes every 8000km (Done last month) Engine air intake filter (Done last month) $85 on average to fill the tank with good fuel economy. The First Person With $15,000 OBO CASH Takes This Beauty Home... If you would like to view and take my Pathfinder out for a test drive just call or text ⭐780-885-1867⭐ for the fastest response I am located in Sherwood Park. The price is negotiable but only In-person..No Pay-pal, Spammers, Scammers or Tire kickers.

categories:Auto and TrailersSUVs

1357 impressions

423 views

NEW ITEM Games System - Mini Game Anniversary Edition. built in 620 classic games NTSL/Pal employed universally Open to reasonable offers. NEW ITEM

categories:Other

830 impressions

134 views

https://www.basspro.ca/p/crosman-f11-nitro-piston-22-calibre-air-rifle   300$ brand new selling for 190$.  Works well. Like NEW. Only used 2-3 times. 

categories:Sporting GoodsGuns

1718 impressions

168 views

Bought it and it's not big enough for what I need. 5x7 deck, tent trailer frame and axle. 2 sets of tires with rims. Lights work but the wiring work is cheap, comes with wiring loom for new harness protection. 2" and 1⅞" ball trailer couplers. All the lumber and tools are included. Selling everything together. PLEASE SERIOUS INQUIRIES.

categories:Tools and Equipment

1046 impressions

103 views

WW1 French M1886 bayonet for the Lebel rifle. This is the war time simplified version without the quillion (hook) and with the brass handle. This version with the brass handle is of a type produced during the First World War, from the 25th of October 1914 until July of 1917.   The left side of the blade has the initials SG stamped just in front of the guard to identify the Maker.  The "S.G." mark on a French bayonet from the World War I era stands for Sutterlin Lippmann & Cie., a manufacturer located in Saint Étienne. The base of the guard has a stylized letter P with the number 45979 stamped into it. The scabbard has this matching serial number. The base of the grip has the number 11 stamped into it. The release button works as designed.   Overall Length – with blade in scabbard  - 25 3/4” Length of Bayonet – 25 1/8” Length of Grip including the Guard – 4 5/8” Blade Length – 20 1/4”   $200.00   Thanks, Phil

categories:Sporting GoodsGuns

5603 impressions

212 views

Looking for Winchester model 94 levers and Marlin levers. Will pay fair cash prices. The older the better. Mint condition or used is fine as long as in safe functioning condition. I know levers so don’t try making up some stupid inflated price. Won’t work on me. Haha Please contact me. Thanks

categories:Sporting GoodsGuns

3142 impressions

129 views

Weatherby MODEL 307™ ALPINE™ MDT CARBON. 7mm PRC 2 boxes through, harvested one animal. Absolutely a dream to shoot, $4550 Can Ship https://www.corlanes.com/weatherby-307-alpine-mdt-carbon-7mm-backcountry-20.html Through years of innovation and testing, the Model 307 action features a bolt that was designed to have a tool-less disassembly which allows hunters and shooters to easily field strip their bolt if needed. The bolt is equipped with an M16 style extractor for positive extraction and reliable ejection. The Alpine MDT comes standard with externally adjustable TrigerTech field trigger and PEAK 44 picatinny rail. The Alpine MDT sits on MDT’s lightweight HNT26 Chassis System, which is their first purpose-built hunting rifle chassis. This stock provides all of the benefits one expects from a chassis system such as v-block bedding, adjustable length of pull, adjustable comb, and AICS magazine compatibility. Weighing in at just 26oz, the chassis is constructed of a magnesium alloy stock, carbon fiber forend, carbon fiber pistol grip, and carbon fiber buttstock. The forend has an integral ARCA rail for easy attachment to a tripod and a foldable buttstock for compact storage. Available in standard short and long actions, the Alpine MDT not only offers some of Weatherby’s historic magnum cartridges but is also available in some of the most popular cartridges on the market. The Alpine MDT is compatible with most after-market 700® platform parts, making it the most open platform in the Weatherby line-up. Proudly built at our headquarters here in Sheridan, WY.

categories:Sporting GoodsGuns

10251 impressions

510 views

Roughtec Pro model in mint condition. These have a very good stock similar to a B&C. Included are Atlas Works bottom metal and bolt shroud replacing the factory plastic parts. Also included are 2 new in the box mags, so 3 mags total. Scope and mounts not included. Have a rail I can include. $1500

categories:Sporting GoodsGuns

4490 impressions

343 views