I don't have anything in 243win anymore so this is surplus to my needs. As to what this does; check out what RCBS says on their website: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Note that I will not respond to contact that is not made by a member of this community through the messaging system on this website. Not trying to be difficult just want to avoid scammers. With respect, Cody

categories:Sporting GoodsGuns

5476 impressions

275 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Iver Johnson "American Bull Dog", .38 RF short and long Revolver Iver Johnson was one of the most prolific makers of pocket revolvers in America, from 1871 to nearly the present. One of the earliest makers of bulldog-type, double action revolvers, the Iver Johnson American Bull Dog is well known and in demand. These were made by Johnson's and the relief grip showing the American eagle on a shield is typical of Johnson's ware. ​ This one is in very fine to excellent condition, with 99% original nickel. The action is accurate and strong, and the cylinder indexes and locks properly with no play. The bore of the 2 1/2-inch barrel is good with strong rifling throughout. The black hard-rubber grips are excellent and undamaged. SN 2407, excellent overall. History & Background Iver Johnson (1841-1895) was a Norwegian gunsmith who came from Bergen to America in 1863. He found work immediately at Ethan Allen's factory in Worcester, Mass. where he met Martin Bye. Johnson worked at Allen's through the civil war years, as demand for firearms was high, and work was plentiful. By 1871 Johnson and Bye had decided to venture out on their own and founded Johnson Bye & Co. in Worcester, moving to Fitchburg by 1891. In 1883 Martin Bye left the company, selling his interest to Iver. The company name was changed to its most famous form, "Iver Johnson's Arms & Cycle Works, Fitchburg, Mass.", a name it would retain until the outbreak of the First World War. Iver Johnson did not only produce a large variety of firearms, they were also famous for their excellent quality bicycles and motorcycles. The company would remain in business until 1993. The name was "revived" in 2006 and the brand is still used today.

categories:Sporting GoodsGuns

18996 impressions

841 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Forehand & Wadsworth " number 32 Double Action", .32 RF Pocket Revolver This one is in excellent condition. The nickel plating is intact. Factory Engraved. The action is crisp and strong, and the cylinder indexes and locks properly and tightly. The bore of the 2 1/2 inch barrel is very good and bright with sharp rifling. The grips are very fine and undamaged. SN 13745, excellent overall. ​ History & Background Sullivan Forehand was an employee of Ethan Allen, the famous New England gunmaker. In 1860 he worked in an administrative capacity when he met his future wife - Allen's daughter - at work, and after marrying into the family became a partner in the business. Henry Wadsworth, an officer in the union army, met another of Allen's daughters while still in service during the war, and married into the family as well. Upon his discharge from the army, Wadsworth joined the company which was renamed "Ethan Allen & Co." After Allen's death in 1871, the two sons-in-law took over the firm and renamed it "Forehand & Wadsworth. They would become well known especially for their bulldogs, but also their many fine pocket and large-frame revolvers, single-shot deringers and pistols. Forehand & Wadsworth remained in business until 1890 when Henry Wadsworth retired and Sullivan renamed the company "Forehand Arms". After Sullivan's death in 1898 the company foundered and was taken over by Hopkins & Allen in 1902.

categories:Sporting GoodsGuns

10156 impressions

642 views

222 rem reloads, brass, and reloading dies. Reloads 188 rounds Brass- 347 2 sets reloading dies rcbs and lee 4 boxes factory ammo. Call or message for pricing

categories:Sporting GoodsGuns

8237 impressions

393 views

If this ad is still up then item is available For Sale -  Lee Precision 45-70 Govt full length steel reloading 3-die set - complete set (no crimp die included) $85 firm 1 set available Brand new in box - new manufacture -full length sizing die -bullet seating die -expanding die -powder scoop -shell holder -data, load chart, and instructions -handy red box & lubricant If you want a crimp die also, contact me as one is available for sale... EMT (shipped) or cash(F2F pickup) - Remote pick up available by appointment only, house drop box or shipped at buyers expense. Small package/tracked, all provinces - $22 (small box) via Canada Post Text or email only / unable to answer calls in remote areas No trades or offers

categories:Sporting GoodsGuns

8056 impressions

225 views

New in package. LEE Micrometer adjustable charge bar is an accessory for powder measures used in reloading ammunition, which replaces a standard disk to allow for precise, adjustable powder charges. #90792

categories:Sporting GoodsGuns

2952 impressions

201 views

Please text anytime 6476871484. Fully functional antique revolver in perfect and ready to shoot condition ,very good single and double action. Reloadable ammo is available but sold separately No PAL required. Comes with FRT RCMP paperwork. Tested fired with smokeless powder ammo. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver. This one is in perfect condition with 100% of the finish intact. The serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 5-inch barrel is quite good, with strong and sharp rifling. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 17793, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in faivour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:Sporting GoodsGuns

21090 impressions

1334 views

 I Just found some shell holders,  in the back of the bottom drawer of my loading bench, for a Lee Hand Primer ( which I haven't had for over 20 years ), and which are no longer useful to me for reloading. There are only these four shell holders remaining priced at $5.00 each.....The red plastic case which holds a total of 12 shell holders, is priced separately, also at $5.00. # 1= (256 win mag, 38 S&W, 38 colt N.P. , 38 colt short, 38 long colt, 38 SPL, 357 mag., 41 long colt) #3 = ( 22 Savage, 219 Zipper, 25/35, 6.5x55 Mauser, 7.5mm S-Rubin, 30 Herrett, 30/30 (30WCF).32 Win Spl, 30/40 Win, 375 Win, 38/55 Win, 408 Win) #14 = (38/40 Win, 44/40) # 19 = ( 9mm Luger, 30 Luger, 30 Mauser, 38 Super Auto, 38 ACP, 40 S&W/10mm Auto)   I am willing to ship at buyer’s expense or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.      

categories:Sporting GoodsGuns

13539 impressions

317 views

One full pound of Accurate 5744, unopened looking to trade for SR-4756, H335, Reloader 7 or IMR4350. Or $90 OBO. Not interested in shipping.

categories:Sporting GoodsGuns

3116 impressions

237 views

I run three Lee 4-Hole Turret Presses for case prep and general reloading. To keep my workspace organized, my disabled daughter and I printed these wall-mounted turret racks — they turned out great, so we printed extras to share. They’re perfect for light-duty use and free up valuable bench space, keeping your turrets neatly displayed and easy to swap out. Available in red, black, and blue. Printed from durable PLA filament. Designed for the Lee 4-Hole Turret Press. 👉 $10 each or 3 for $25 — Veteran printed 🇨🇦 👉 Help support a Canadian Army veteran and his disabled daughter 👉 Check out my other ads: https://townpost.ca/user/younggunscanada

categories:Sporting GoodsGuns

3050 impressions

351 views

Barnes 30 cal 190s For sale 5 boxes never bin open $75 each Will trade for powder IMR 4831 , H 1000 , reloader 22

categories:Sporting GoodsGuns

2597 impressions

283 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Test fired with smokeless powder. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1892 "New Army" Revolver has significant improvements over M1889 with better locking and indexing mechanism. This one is in excellent condition. The nitro blue on the trigger and hammer is well visible and retains 95% of original blued finish. The action is strong and accurate, and the cylinder indexes and locks properly very little play on trigger pull. The bore of the 4 1/2 inch barrel is good and bright with strong rifling. The markings are sharp and defined throughout. The assembly numbers on the cylinder, crane and frame. The original grips are good and undamaged.​​ S/N 71799 History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand. The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

27388 impressions

1807 views

Best realistic offer or trade for powder/ 20g components Pacific Reloading Bushings – Powder (15 pcs) + Shot (9 pcs, incl. brass) Description: Selling a mixed lot of original Pacific reloading bushings for shotgun shell presses. • Powder bushings (15 pcs): Letters X, L, AA, N, P, Q, M, W, Y, Z and numbers 456, 501, 534, 438, 492. • Shot bushings (9 pcs): Ranging from 3/4 oz up to 1 7/8 oz, includes one brass bushing. All in good, clean used condition. Pickup Edmonton or ship Shotgun , reloading

categories:Sporting GoodsGuns

5169 impressions

327 views

I reload 9 mm, .45 ACP, and .40 S&W on my Lee Pro 1000 together with my disabled daughter. To free up bench space in our little workshop, we printed these wall-mounted turret racks — and they worked beautifully. Printed with PLA, they’re perfect for light-duty use and keeping your turrets organized and out of the way, so your press area stays clear and efficient. Available in Black, Blue, and Red. $10 each or 3 for $25 👉 Help support a Canadian Army veteran and his disabled daughter. 👉 Check out my other ads: https://townpost.ca/user/younggunscanada

categories:Sporting GoodsGuns

2789 impressions

291 views

If you’ve ever fought with stuck or stubborn older-style Lee dies, this little tool makes life a lot easier. My disabled daughter and I printed these to keep at each press station, and they’ve become a staple in our reloading workflow. Designed for older-style Lee dies (non-hex lock rings) Lightweight, durable PLA Perfect for quick adjustments without marring your dies Compact enough to hang on a peg or keep by the press 👉 $5 each — Veteran printed 🇨🇦 👉 Help support a Canadian Army veteran and his disabled daughter 👉 Visit my other ads: https://townpost.ca/user/younggunscanada

categories:Sporting GoodsGuns

3387 impressions

265 views

Marlin 1895 in 45-70 Can meet in edmonton, grande prairie, calgary and the surrounding areas. Really good gun, shoots great and works awesome, down sizing but maybe interested in a partial trade for a 20 gauge Comes with the shell holder, xs lever scout rail, reloading dies and vortex crossfire II Hunting gun so has some little scratches and a chip out of the butt stock pictured Price is OBO but asking 2000 for the rifle and attachments and 2600 with ammo

categories:Sporting GoodsGuns

16317 impressions

996 views

Selling to get some cash flow, this is an antique, all matching and fully operational Smith & Wesson top break double action new model #3 revolver. These were the first double action guns ever made by S&W, driven by demand to increase rapid performance at close quarters while still having the choice to shoot with more accuracy in single action. These were mostly chambered in the popular .44 Russian round. These can be purchased in cowboy loads from myself as part of the deal, found online, or easily reloaded with .44 russian, magnum, or special brass. As an antique, this handgun requires no licensing or registration to buy or own in Canada. Do your own legal research! This gun is serial number 35XXX, dating its manufacture to the late 1880s. As a nearly 140 year old gun, the mechanical condition is strong, with all three positions of the hammer exactly as desired and both single and double action trigger pulls nice and light. Indexing is reliable with a lockup of both the cylinder and the top break hatch having less than 1mm wiggle room. The original hard black grips are still sturdy and nice. The 6 inch barrel on this bad boy still has loads of accurate lead to deliver. Ejector functions perfectly. Visually, the overall look is a peppered patina. Very little of the original nickel remains, with a mottled "in the white" surface being most dominant. No severe or active oxidation can be found. All of the two line address and patent info are clearly visible on the top strap, with the S&W stylized logo featured strongly on the right side. An dependable example from a world renowned manufacturer. No PAL, must be 18 Ships Canada Comes with digital FRT report Check my ads for more antiques! I make no claims about the safety of firing ANY antique gun. Check with a gunsmith!

categories:Sporting GoodsGuns

17936 impressions

1473 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot like new condition. Very smooth action. No PAL required. Comes with RCMP FRT paperwork. Reloadable ammo is available but sold separately. Tested with smokeless powder. This is conversion to British .455 Webley ammo. (available for sale online). but still can shoot original 11mm ammo. It is very interesting example of rarely blued 1873 French Service Revolver that was imported to United Kingdom and converted to .455 Webley caliber which was readily available in England of that time and was considerably more powerful than original 11mm ammo. This one is in excellent original condition, all the markings are sharp and complete. The serial numbers are repeated on all components: the barrel, cylinder, frame, grips, internal mechanism parts and even the screw heads and escutcheons. Everything matches. The bore of the 4 1/2 inch barrel is as perfect and it is mirror bright and the rifling is sharp. The action is excellent and accurate and very smooth, the cylinder indexes and locks properly with no play at all. The walnut grips are excellent and show no damage this one looks like new. SN H48478, this one is made in 1881, rated excellent overall. MAS Mle 1873 French Service Revolver, 11mm French Ordnance The Mle 1873 was France's first double action cartridge revolver. After the disastrous loss to Prussia in the war of 1870, the French military closely examined its armaments and small arms, and they came to the conclusion that a new, more rugged and powerful side arm for their infantry was required. The result was the Mle 1873, designed by the famous partners of Chamelot & Delvigne, whose genius ideas would dominate much of the European military (and commercial) small arms market for decades to come. Many European countries adopted their designs, including Switzerland, Italy, Sweden, Russia and Belgium. Only the Brits and Germans would continue to develop their own side arms.

categories:Sporting GoodsGuns

26161 impressions

2018 views

This is a functional scarce and unique Antique Galand Model 1868 single and double action Revolver. Designed for 7 mm Perrin which gives it antique status, this revolver happens to accept the nearly identical .32 S&W short cartridge which can be reloaded at a low cost, and can even be made from cut down .32 S&W Long brass. There are very few antiques that will accept this caliber, so this is a lucky find. Unlike most antiques which are big and heavy, this is a small frame and compact revolver which still shoots a reliable round. Overall length is 7 inches. Mechanics are fair, with a working action in both single and double action. The hammer is strong and indexing is reliable. The rifling is still strongly defined down the 3" barrel, with evenly scattered patches of inactive oxidation from black powder use. The Galand patented mechanism involves a very unique lever which pulls the barrel and cylinder straight forward while ejecting spent shells. All components of this work fine. As a revolver that's a century and a half old, some wear and wiggle is evident in the lever and hinge mechanism, but it still works consistently and properly. Visually this revolver has an even gray/blue surface with some bits of lustre showing beyond the aged patina. No significant pitting is evident, though scattered dings and scratches are present. The grips are solid, with the left one showing an old crack that could be pretty easily stabilized and closed back up. No PAL, 18+ Ships Canada Check my ads for more antiques. I make no claims about the safety of shooting ANY antique! Check with a gunsmith.

categories:Sporting GoodsGuns

16022 impressions

924 views

Brand: Mauser Calibre 7×64 Great condition. It comes with the scope (Bushnell Trophy Extreme)as shown in pic and 200 brass for re-loading and a DIE SET. Shipping is not included.

categories:Sporting GoodsGuns

16521 impressions

966 views

Your Destination for High Quality Hunting & Sport Shooting Supplies! https://neerlandiacoop.com/sportsman-centre/ Order Online - Shipping Available Across Canada. • We have all the Reloading Components you're looking for • Western Canada's largest distributor of Berger Bullets • Benefit from Expert Advice LOCATED AT: 3224 Twp Rd 615A, County of Barrhead, Ab Consider MEMBERSHIP with Neerlandia Co-op: https://neerlandiacoop.com/membership/

categories:Sporting GoodsGuns

193035 impressions

1643 views