Bought off elderly gentleman in Saskatchewan 2 years ago. Its a solid old unit ! fires good i think i cleaned it once comes with 2 barrels (longer). has tube extension and end cap if you want shorter. $500 is what i paid for it and i expect no less

categories:Sporting GoodsGuns

4928 impressions

1180 views

Recently upgraded my hunting set up, and no longer need. This was a perfect gun for a new hunter. Chambered in 270 Win, I have taken deer, elk and moose with single shots. Proven accurate, and like new condition. Includes a Vortex crossfire Scope with BDC reticle. Spiral fluted bolt and barrel, and drop box magazine. Retails at Cabelas for $639.99, but looking to get $500 Pickup or Drop off in Calgary.

categories:Sporting GoodsGuns

6109 impressions

587 views

Wood stock black finish 31/2 inch semi auto comes with red dot site very nice gun maybe 25 rounds threw it almost brand new comes with 500 round of 3" steel shot 2000$ 4036357584

categories:Sporting GoodsGuns

3741 impressions

505 views

one of 500 Marlin Golden 39A Annie Oakley .22LR - Engraved Gold Receiver 39 in mint condition. Heavily Engraved Receiver with Gold accents. One side of Annie Oakey and "Annie Oakley" in Gold script on the bolt. Other side of the Receiver has engraving with another portrait of Annie Oakley shooting her Marin with "little Sure shot in gold script and an Ace Card. Barrel markings include : "The Marlin Firearms CO. North Heaven. Conn. U.S.A " "CAL 22 S.L & L.R. Micro-Groove Barrel Original Golden 39A" Includes factory Sling studs in stock and forearm.

categories:Sporting GoodsGuns

4989 impressions

556 views

500 pcs.45 ACP 230 gr bullets

categories:Sporting GoodsGuns

1627 impressions

314 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2955 impressions

494 views

Brand new The Mini-Clip 2.0 was better than the original but the opportunity presented itself to go further using new highly efficient mold/manufacturing partners right here in Texas. The Mini-Clip 2.0 Flex has the flexibility to accommodate a wider range of short shell lengths, should Aguila ever want to make an even shorter (or longer) Minishell. Re-loaders were very interested in this accommodation as are buyers of Exotic Products Shorty shells in varying lengths. The 2.0 Flex will feed all but the longest in their line, the 3 Buck. Allows use of 12ga 1.75” Birdshot, Buckshot, and Slug shells                  Fits: 12ga Mossberg 500, 590, 590A1, and Maverick 88 models Use with Aguila Birdshot, Buckshot and Slug offerings in Mossberg 12ga 500, 590 and Maverick 88 models Easily installs and uninstalls in seconds to allow use of 1.75", 2.75" or 3" shells as desired by user Practice with less expensive Aguila birdshot as the recoil response vs. Aguila buckshot is slight Low recoil of buckshot allows for safe, easy and comfortable aiming and discharge with pistol grip configurations (with proper grip/face clearance, of course). Not confined to hip and laser shooting Mini-Clip stays in well, but may want to tape in with electrical or Gorilla tape for close contact or heavy foliage environment applications

categories:Sporting GoodsGuns

9958 impressions

571 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2744 impressions

407 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2776 impressions

492 views

1000 80gr eldm 224 $500 589 80gr vld $360 55 105gr vld hunters $40 Plus shipping. Text for response

categories:Sporting GoodsGuns

2903 impressions

443 views

Selling the below rifle and ammunition package. Items are in excellent condition (near new), pictures included. Total purchase price (including ammo) was over $3200. Selling for $2200, OBO. Buyer must take all items – PAL required. Located in Southern Ontario. Please contact with any questions. Package Includes: 1. Kodiak Defense WK-180C Gen 1 5.56 Nato – Fired about 300 rounds: - Spitfire 3x Prism Scope - 460 Barnaul .223 / 5.56 Rounds - 1 x Magpul 5 round magazine - 2 x steel 5-round magazines 2. GSG 15 .22LR – fired about 500 rounds: - Magpul steel sights - 5000 Winchester 525 .22LR Rounds - GSG 100-round drum magazine - 2 x 20-rounds magazines 3. Plano All-weather Rifle Case (42 Inches)

categories:Guns

25294 impressions

2709 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

4194 impressions

485 views

Sniper comes with bipod and cheek pad 1 mag about 100 rounds ran through it. GSG comes with two 22 round mags and 110 drum mag about 500 rounds through it . Willing to trade more looking for a shotgun but send what you got i'll let you know if i'm interested and will sell individually 450 for Savage 500 for GSG. Must have PAL

categories:Guns

5023 impressions

343 views

Keltec sub 2000 9mm glock mag Comes with 2 magazines Few rounds shot Perfect for a backpack 500$

categories:Guns

5148 impressions

280 views

Please text anytime 6476871484. Fully functional no PAL required . These flare guns can be used with 12 gauge adapters  for 12 gauge flares and bangers. They are most durable flare guns heavier and/or larger then modern plastic/metal ones. 26.5mm to 12 gauge universal flare gun adapters available for $100 each. 12 gauge flares available for $5 each. Here is the list of Flare guns currently in stock:  Bosnia military AC Unity BIH (aka H&K P2A1 Clone) NEW $520  Bulgarian military 26.5mm Flare Gun $490  Polish 26.5mm Flare Gun, (Factory 11) $500 European military flare gun. $450 Comet 12 gauge special addition flare gun. (plastic) New. $100 All addons pictured not included and sold separately.

categories:Sporting GoodsGuns

26209 impressions

2464 views

Mossberg 500 pump. 30 inch barrel. Good bird gun.

categories:Guns

3658 impressions

271 views

3D printed Mossberg 500/590/835 4x shell holder This design utilizes the existing picatinny rail screw holes on the Mossberg 500, 590 and 835. it holds 4 extra shells on the side of the shotgun. I used M4X8 hex head screws to attach to the shotgun. Which are included in sale. I have hunted with this attached to my Mossberg with no issues and without the shells falling out. you can also wrap it in camo to blend in with a wrapped shotgun Two designs available, with picatinny rail and without Shipping available.

categories:Guns

13936 impressions

1194 views

Gun belts 22lr to 45 Lc and up new 500 rigs Large rifle belts as well Pack equipment and all repairs Western gear you name it. Gun belts work belts tool belts and suspenders Holsters any shape and up to yes the 500 mags Pancake holsters defender holsters scabbards Bags and any other things new style ammo holster Dog collars all sizes

categories:Sporting GoodsGuns

42756 impressions

4446 views

Parts Only Canada is your source for quality gun parts and accessories in Canada. We offer aggressive pricing on our products; you are unlikely to find a better deal! All orders above $250 (before taxes) ship free! www.partsonly.ca Customer satisfaction is our top priority. We go the extra kilometer to offer quality made gun parts, reliable shipping, and prompt service; earning the loyalty of gun enthusiasts across Canada. Our product lines are primarily aimed at sport/target shooters. Most of the items we sell are USA made. Some of the brands we offer include: Magpul, ATI, ProTech/Archangel, Bravo Company Manufacturing, Uncle Mikes, MDX, OEM Ruger, OEM Glock, PSA and similar. We support platforms like the Mossberg 500, Ruger 10/22, SKS, Glock, etc. If you have a request for a specific part that isn't on our website, please send us an email at info@partsonly.ca with details including a product code or part number. We'll see what we can do to get what you need! We receive our shipments about every 6 weeks and are happy to add your parts to our order. You must be age 18+ to order from partsonly.ca. You must read all terms and conditions of use before placing an order through our website. Applicable tax applies on all orders. www.partsonly.ca

categories:Guns

39982 impressions

3554 views

RED RESCUE Flares, great for Hunters, backpackers, hikers, boaters, anyone that may want to have more visibility in the out of doors. Will reach up to 50 stories (500 ft.) (152 meters)Shot above your head.Can be seen 20 miles or more.New (old stock) surplus. Work Great to shoot off at New Years. Or anytime you need to let people know you need some help (SOS) (not sold for commercial boats.) Or boats over 19 ft long. These are SURPLUS FLARES Regular price is $100.00 for 5 flares. MY price is $25.00 for 5 flairs. $40.00 for 10 flairs. $100.00 for 30 flairs Come in packages of 5 flares. Plus shipping. Check with us, which gun shows we will be attending and you can pick them up at the show? Call or text 306-221-9599

categories:Sporting GoodsGuns

21773 impressions

1987 views

8 box of 50 Brass 32S/WLong, new Winchester with Primer 125.00 + shipping 2 box of 500 bullet lead cal.32 Hornady HBWC .314, 90 gr. ,150.00 + shipping

categories:Sporting GoodsGuns

13758 impressions

1608 views