If you want to make better steady shots on your game from gophers,coyote,bear,deer,elk,Moose. Our tripod shooting rest is not only the only shooting rest that has 2 rests on one shooting rest.. designed by a Canadian from St Albert Alberta Buy direct from us. Or see us at 1 of the many gun shows we do in Alberta,Saskatchewan . You can set this one rest into 2 positions to use at any time while hunting or shooting for better shot placement.you can go from prone(laying dow) to all other positions ,kneeling position ,to a full standing position. Steady shooter tripods work for shooters from 4 ft tall to 6'6"+ Fully ajustable and suited for all applications to steady your rifle. Made of the best materials. Other stands out there being sold are not built as well as ours but you will pay from $180-$250.00 plus tax limited time price : Shipping included : Buy 1- TRIPOD = $135.00 Buy 2 -TRIPODS = $240.00 Buy 3 -TRIPODS = $350.00 Above prices INCLUDES shipping. BUY NOW AND SAVE. Call us and order a FEW TRIPODS SAVE $$$ and make better shots,also use them as a walking stick too. E-TRANFERS on all orders Thanks for buying the best made SHOOTING REST ,Tripod. STEADY SHOOTER TRIPODS. (They make a great gift for the hunter that has everything.) 306-221-9599 text or call More information on the shooting tripod you may want to read below. The SteadyShooter is the best portable shooting support on the market. Price is about the best price on the market.   The SteadyShooter is light-weight (approx. 985 grams or 2 pounds) and the legs fold together which makes it easy to carry with you at all times when hunting.   SteadyShooter has a fully-adjustable side rest which can be used to instantly shoot from a kneeling or sitting position. In my experiences this is a very useful feature as sometimes getting up for a standing shot can spook your animal away. To my knowledge, no other shooting rest on the market has this feature.   The above-mentioned side-rest  can also be used to allow shooting from the prone position.   The legs have two telescoping sections so they can be varied in length from 32" to 75".  However, using the side rest you can support your rifle at a height as low as 6" (ie. prone position).   The SteadyShooter sets up in seconds when a hunter carries it with the legs extended to his/her preferred length.   The V-yoke rotates 360 degrees and provides a very steady support for your rifle.   The V-yoke and side-rest are both nicely padded with soft rubber to protect your gun.   SteadyShooter folds into a small convenient package (3½" X 35") for transport and storage.   The legs are aluminum and the other parts are molded plastic and/or rubber.

categories:Sporting GoodsGuns

80341 impressions

7922 views

Excellent gifts for birthday's,Christmas stocking stuffers, for the gun,rifle,shotgun, owner . Description The BEST AND EASIEST WAY TO CLEAN ANY BORE. Clean your barrel or bore of any rifle or Shotgun! I have put a few pictures of the way to use a bore snake to clean the inside of your shotgun or rifle barrels. You can take this handy barrel cleaner with you in your pocket, to the range, on your next hunting trip, to clean your barrel as needed. Any rifle barrel cleaner we sell will fit in your pocket. There is no need anymore carrying your bulky (in a case) cleaning kit to the range, now just role up your bore snake and stick it in your pocket. What is a bore snake ? World' s Fastest Gun Bore Cleaner ; Cleans gun bores in 10 seconds ; Has 160 times more fabric cleaning the bore than a cleaning rod with 2 cleaning patches on it,bore snakes also has a copper or brass brush built into the rope of the bore snake! We have 11 different bore snakes that cover 23 + different calibers and will clean the following calibers. G01 : 12 GA Gauge, G02 : .22 Cal .223 Cal & 5.56mm, G04 : .30 Cal .308 30-06 .300 .303 & 7.62mm, including Sks, Mosin Nagant, SVT -40 M305, M14, M1A G05 : .17 Cal 17HMR .177, G07 20 gauge G08 : .270 Cal .280 .284 & 7mm, G10-243cal.6mm G12 : 410 GA Gauge, 41cal. G14 45-70cal G16-16 GAUGE G19- 10 GAUGE IS $15.00 My price is $10.00 each for all calibers. Can send any 4- bore snakes for $7.00 shipping, except 410, 45-70, 20 ga.16 ga.12 gauge AND 10 GAUGE as they are to thick to slide through the over size letter slot at the Post Office, Oversized bore snakes must go by parcel with tracking # shipping starts at $19.99 for tracked package , so buy all your bore snakes at one time and get them from $20.00 -$24.00shipped. Depending on amount and size. Each bore snake is now Only $10.00 ea. EXCEPT 10 GAUGE are $15.00 ea. Minimum order is 4 bore snakes per order. Text or call, 306-221-9599 all orders done by. E-Transfer Price and compare : Cabela's price is $28.00 ea. plus tax.for each bore snake. 12 GA. ARE CLOSER TO $30.00 AT Cabela's HAVE A LOOK AT ALL MY ADDS. dakotahunter on town post. How to use a bore snake ? Drop brass weighted cord through the bore. Pull slowly,being careful not to snag on edges or gun parts. Repeat as needed until gun bore is clean. The Bore Snake can be washed easily by Hand. Attention : Be sure firearm is uploaded before cleanup ; Verify your gun bore is free of obstructions after use of this product ; and before firing.Keep this product out of reach of children ; barrel cleaner, cleaning rod, barrel snake , barrel cleaner, fast barrel cleaner, rifle, shotgun, combination? Single shot, double barrel,drilling, break action, falling block, bolt action, semi auto, pump, Use the Bore Snake only on recommended calibers. Call or text 306-221-9599

categories:Guns

120009 impressions

6200 views

Will buy any amount from 1 to 101 non restricted and parts amo etc. paying FAIR PRICE CASH IN HAND Tex or Phone only will Not Respond to E mails

categories:Sporting GoodsGuns

40660 impressions

4193 views

Please text anytime 6476871484. Brand new . $490-560 Bosnia military AC Unity BIH (aka H&K P2A1 Clone) Caliber 26.5mm These pistols were built in Sweden and other European Countries. They were built under a licensing agreement between H&K and several manufacturers. They are a 99% clone to the Heckler & Kock Flare Gun Model P2A1. The design is just slightly (cosmetic) differences All parts and components are same and interchangeable. Just like the H&K this flare gun is one of the most modern military surplus flare guns in existence, with it being lighter than most other flare guns. It is also highly desired as it is an official H&K product, which makes it desired by H&K collectors and fans of HK products. The flare gun went into production in the 80’s and is the most modern and sought after in the market today. Although no special licensing is required to purchase one of these flare guns, HK has put a lot of restriction on when and where they will sell the guns and will not even make them regularly available to their dealers.

categories:Sporting GoodsGuns

49123 impressions

5411 views

Clear optics, German crosshair type reticle, blues finish, 1” tube, includes claw mount scope rings & bases for drilling shotgun. Can Ship anywhere in Canada, *Please see my other adds for Collectable Rifles, Ammo & Accessories.

categories:Sporting GoodsGuns

73094 impressions

3173 views

Brand new Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~3" recommended) All mounting hardware included The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. Made in USA

categories:Guns

4260 impressions

713 views

I'm relocating, and this is one of the last builds I'm selling. This build has not been fired and hasn't been out of the house. Rifle: Savage Model 12 Short Action Caliber: 6.5 Creedmoor - 26" Heavy Barrel Chassis: MDT XRS + Vertical Grip — Have original stock for the rifle included. Mags: 1x Metal MDT Mag & 1x Polymer MDT Mag Scope: Vortex Strike Eagle 5-25x56 FFP Mount: Vortex Precision Extended Cantilever Mount on MDT 20 MOA Picatinny Scope Base Bipod: Magul Bipod Bag: Range Maxx Two Gun Bag Ammo: I'll throw in 60 rounds for whoever purchases this. No low ballers. Will need Pal in order to purchase. I can sell without the scope if needed too.

categories:Sporting GoodsGuns

21291 impressions

1801 views

This is a nice example of a Mosin. Barrel is in great shape. Grooves look new. Normal wear from a gun that was probably used during WW2. Hammer and sickle stamp still well visible. Fires beautifully and very accurate.

categories:Sporting GoodsGuns

31141 impressions

2754 views

New prism scope, adjustable intensity red dot, 5X. very sturdy build, accurate 1/4" MOA elevation and windage adjustments. Fast target acquisition with inverted V red illumination. Pictanny rail mounting with 4 different riser and cantilever pieces for flexibility in mounting options.. Replaceable lithium battery. Rubber eye caps/covers. Solid,flexible and robust mounting. I bought this as a perfect shotgun slug scope. I found the eye relief at about 2 inches, not 2.9" as the specifications state. With the heavy recoil of the 12 gauge slugs, the scope was kissing my eyebrow. I used it once and realized sooner or later I was going to get a nasty scope cut. This scope is essentially new, unmarked in perfect condition, with the original box, pamphlets, all accessories. Suitable for a a 20 gauge shotgun/243 Winchester or less in terms of recoil. Perfectly suited for .223 AR platform rifle with surprising accuracy

categories:Sporting GoodsGuns

16944 impressions

580 views

Vintage Display pieces. Bought as wall hangers. Not really right for me. Could be display pieces, could be part of a cosplay. Really the options are endless. The Flintlock has bit of weight to it and is quite convincing from a distance. The dagger is a replica of 18th century pistol daggers and is quite hefty. Asking $300 for both.

categories:Sporting GoodsGuns

3247 impressions

520 views

Ranger point stock and ammo holder Like new had on gun for alil bit but took off as it was the for the wrong model and I preferred the wood stock in the end nothing wrong with it also selling bullet holder and plate attachment. Stock retails at 299 American and the bullet holder and plate are 60 American asking 400 Canadian as it is used located Beaverlodge ab. Will ship at buyers expense will fit both models of marlin

categories:Sporting GoodsGuns

2301 impressions

308 views

Complete collections and accessories

categories:Sporting GoodsGuns

1696 impressions

75 views

Brand new Pump action Gauge: 12 Gauge Chamber: 2-3/4″ or 3″ Capacity: 5-Round (Magazine-Fed) Sights: N/A Barrel: 10.5″ Chrome Lined Upper Receiver: Monolithic Aluminum Lower Receiver: Polymer Stock: Fixed Ambidextrous: Yes Color: Black Part #: IHF-E12

categories:Sporting GoodsGuns

817 impressions

76 views