Selling/trading a few Dan Wesson Model 15 barrels and parts. The two prohibited barrels will require a valid 12(6) license to purchase, and the restricted barrels will require a valid restricted license. As follows: 1. 8" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 2. 6" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 3. 4" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 4. 2" vent rib barrel, solid underlug w/ shroud. Bore very good. SOLD 5. 4x interchangeable front sights (2 white, 2 yellow). $45 each 6. Spring Kit #12 (assuming factory). $20 7. Wood grips, modified to fit a smaller hand. $50 8. Factory "Pistol Pack" case w/ correct yellow lined inside (no keys for locks). $195 shipped I'll be keeping one of the non restricted barrels, whichever one is left after the first one sells. Shipping included on the barrels and case, flat rate shipping of $18 on the sights, springs and grip. Open to selling the collection as a lot. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

4559 impressions

684 views

Now in stock at Gold'n Loan Outfitters and Pawn, located in Stony Plain and open 7 days a week to keep you locked and loaded

categories:Sporting GoodsGuns

792 impressions

316 views

11-87 12 gauge camo 3 inch. Please read the full ad before contacting me. This is a bit of a project gun. I bought it new in 2008 and shot it casually over the years with almost nothing but lead trap loads. Recently it developed a problem cycling the action after the shot. It will always fire. However, sometimes it will cycle the action, other times the action cycles half way and stops, and still other times it will not cycle at all. Sometimes it picks up a new shell and sometimes it won't. Sometimes is locks up and can only be freed by popping the barrel and the action bars out and re assembling it. I don't have the time or interest to look into it . It might be a simple fix who knows. I already bought a gun to replace it. This isI a package deal only. This includes the gun as it came from the factory, with 1 modified choke tube, a wrench, 27(?) Inch barrel. It will also come with a Remington 20 inch fully rifled 12 gauge barrel that has open sights. This barrel has 11 slugs through it and was used on 1 trip to shoot a moose. I will ship this gun on the buyers dime but I would much prefer a local sale so that the buyer can actually see the problems themselves. Text Jeff at 403 390 2570 for the fastest response. Located in Airdrie

categories:Sporting GoodsGuns

7551 impressions

935 views

Parker bros. Sxs 12 ga shotgun. Above average condition. Built 1914 VHE model with auto ejectors,Vulcan steel barrels. Beautiful burreled stock and original blueing. Locks up like a vault. Very tight gun. I've owned this gun for 50 years. Great addition to a deserving collector. Cash or etransfers only. No trades

categories:Sporting GoodsGuns

5042 impressions

771 views

My back up scope. The scope was installed twice temporarily on savage 17hmr and s20 6.5 cr for very short time to check the guns out of the box. Excellent like brand condition. There are some Bushnell engage scopes for lower price. Not this one. $549 retail now. This scope has quality like Nitro series scopes but, with a difference like tactical pop up turrets to adjust elevation and vindage and push it in back to lock them. Side focus Elevation and windage at zero from factory. Deploy MOA with a thin reticle 30 mm tube 13-5/8in long with lens covers.

categories:Sporting GoodsGuns

3043 impressions

350 views

Protect you firearms, camera equipment, laptop, collectables, valuables.............. Model 1495 Protector Case • Medium Protective Case • Foam • Fits up to 17" Laptops • Watertight, Crush Proof, Dust Proof • 3 dial combination lock included • Fold down over molded handle • Easy open Double Throw latches • Automatic Pressure Equalization Valve • Stainless steel padlock protectors • Pick N Pluck with convoluted lid foam • Case Specifications: • Exterior Dimensions (L x W x D): 21.62" x 17.25" x 4.87" / 54.9 x 43.8 x 12.4 cm • Interior Dimensions (L x W x D): 18.87" x 13.12" x 3.81" / 47.9 x 33.3 x 9.7 cm • Lid Depth: 1.12" / 2.8 cm • Bottom Depth: 2.68" / 6.8 cm • Total Depth: 3.80" / 9.6 cm • Interior Cubic Volume: 0.55 cubic feet/ 15.46 cubic decimeter • Weight: 8.37 lbs. / 3.8 kg • Weight without foam: 7.23 lbs. / 3.28 kg • Buoyancy Max.: 45.15 lbs. / 20.48 kg • Temperature Range: -40 / 210 degrees F (-40 / 99 degrees C) • Colour: • Black 10 Cases Avail

categories:Sporting GoodsGuns

2024 impressions

369 views

Brand new This is a slightly extended-length barrel, to comply with restrictions in Canada and elsewhere, requiring a 106mm barrel length. This barrel will fit the MR918/MR920/XR920. The spiral fluting reduces weight and adds somewhere for dirt and debris to exit when cycling. This barrel improves the shooting accuracy with its precision-machined design to drop in more easily and fit tight in critical lock up areas. 1/10″ Broach Cut Rifling – Safe with lead bullets. Black Nitride Finish Compatible Gun Models Include: Shadow Systems MR918/MR920/XR920 Elite, Shadow Systems MR918/MR920/XR920 Combat, G19 (Gen1, Gen2, Gen3, Gen4, and Gen5 G19) Made in USA

categories:Sporting GoodsGuns

2405 impressions

423 views

Mint Condition, Built Savage 110BA 338 Lapua Magnum, Military Sniper,Anti-Material Rifle with Blue Diamond Huskama Scope with Custom Laser cut turrets to match the Ammo for 285 grain and 250 grain. Over-sized Jumbo Bolt with Custom Blue powder-coating. Complete with mounted telescoping 13" to 36" Bi Pod. It is a .416 necked down to .338 caliber. Comes with 4 1/2 box's of ammo and also a new carbine fiber cleaning rod. Also comes with a Custom made double locking aluminum case. This is a 1 Mile and beyond rifle. Serious inquiries Only

categories:Sporting GoodsGuns

11325 impressions

993 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2955 impressions

494 views

Please text anytime 6476871484. Durable high quality construction. No PAL required. Comes with box of 100 super penetrator pellets. Looks like a .45 1911 firearm...and just as accurate! Made in Germany by the legendary Weihrauch company, the HW45 is considered by many to be the Holy Grail of air pistols. This is an heirloom airgun that you'll pass along to your grandchildren and beyond. The gun's heft and balance convey quality and substance. It fills your hand without feeling bulky or oversized. The unusual overlever cocking mechanism compresses the powerful mainspring, and the hammer is actually the catch for it. Highly adjustable two-stage trigger, which has a serrated surface for more control, will help you extract maximum accuracy from the HW45. In fact, the adjustable trigger is so crisp, you'll wish it was on your firearms. The dovetail grooves are extra wide, and our accessory list has several 11mm to 14mm mounts that are known to fit. Unlike many modern air pistols, the HW45 isn't made of molded synthetics. It's a solid metal gun with finely checkered grips. And, it's ambidextrous. The 11mm dovetails make it easy to mount a pistol scope or a red dot sight. The HW45 has two power levels. The different power levels are created by cocking the gun to different lock points. See the detail shots to see how to cock the gun for high power and low power. The distance you shoot, the weight of the pellet and the type of target will let you determine which power level is best. The HW45 is an excellent indoor trainer for those who shoot the M1911A1. Caliber .22 (5.5mm) Max Velocity 460 fps Muzzle Energy 5.59 ft/lbs Spring-piston Loudness 3-Medium Trigger Pull 1.75 lbs Barrel Rifled Barrel Length 6.54" Overall Length 11.0" Capacity 1 round(s) Cocking Effort 18 lbs

categories:Sporting GoodsGuns

20896 impressions

1430 views

Brand new Pump action Mag fed Non restricted Caliber: 12 gauge Chamber: 2.75" Barrel:  18.5"  Capacity: 10+1 Sights: Bead Front  Choke: Cylinder Bore Stock: Synthetic  Overall Length: 39.5"  Pull Length: 13.87" Weight: 7.75 lbs  Coming with: One 10 Rounds Magazine Cable lock Made in USA

categories:Sporting GoodsGuns

6320 impressions

400 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

5599 impressions

439 views

Now available at Gold'n Loan Outfitters and and Pawn, open 7 days a week to keep you locked and loaded and located conviently on 48st in the Town of Stony Plain. Shop us online or instore for our full selection.

categories:Sporting GoodsGuns

4445 impressions

462 views

Beretta Model 425 12 Ga Side by Side.28" barrels choked Mod/ICyl.,double triggers, extractor, silver engraved receiver, with Greener cross-bolt lock. Good wood, with no cracks, some little dings and marks on wood. New BMR Italian but pad installed. Gun is in good condition for it's age.(M/F 1964).No trades and not taking offers. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

13748 impressions

1238 views

Brand new Picatinny spec with the proprietary HK HKey lock system and hardware Allen key/wrench compatible No fiddly back pieces or threaded attachment points like M-lok or KeyMod 95mm, 9 slot, long rail Aluminum Allen screw hardware

categories:Sporting GoodsGuns

1342 impressions

348 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

6146 impressions

559 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2744 impressions

407 views

Brand new SureFire SFMB muzzle brake suppressor adapters greatly reduce both recoil impulse and muzzle rise so that your weapon tracks straight back, keeping you on target for faster shot-to-shot recovery. The proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated for extreme durability, they are available for a variety of weapon calibers and muzzle thread specs, and every SFMB serves as a rock-solid mounting adapter for SureFire’s combat-proven SOCOM Series Fast-Attach® suppressors. The SFMB design incorporates multiple bearing surfaces to ensure superior suppressor alignment. Blind pilot holes at the 3 o’ clock and 9 o’clock positions enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. Blind pilot holes at the 6 o’clock position enable indexing the adapter at bottom dead center. All that’s required is a basic hand drill and appropriate drill bits. Offset porting delivers greatly reduced recoil impulse and muzzle rise, so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery Multiple bearing surfaces for superior suppressor alignment Precision machined from U.S. mill-certified heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Inspected for all critical dimensions including concentricity and alignment Pilot holes for tuning of muzzle brake and to pin-and-weld to rifle barrel as needed DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system Model Number: SFMB-762-M18x1.5 Caliber: .308(7.62) Thread Pitch: M18X1.5

categories:Sporting GoodsGuns

8416 impressions

574 views

Brand new The Magpul X-22 Backpacker stock takes the function of our full-size Hunter X-22 Takedown, and pares it down for ease of storage and transportation. Made for the Ruger 10/22 Takedown rifle, the X-22 Backpacker offers a minimalist solution for the hunter or outdoorsman who wants to transport their rifle in an efficient, convenient package without compromising shooting performance. Constructed of a durable advanced polymer, the X-22 Backpacker features an ergonomic hand guard, optional QD sling mounting capability, integrated storage compartment in the grip, a hinged storage compartment in the stock capable of storing up to 3 spare 10rd magazines, a MOE SL non-slip rubber butt pad, and a unique locking interface to attach the barrel assembly to the receiver when being transported. Fits all Ruger 10/22 Takedown rifles as well as the Tactical Solutions SBX barrel. Drop-in design compatible with all factory Ruger 10/22 Takedown Unique locking interface to attach the barrel assembly to the stock body when being transported Reinforced polymer construction for strength and durability Ergonomic hand guard Comes with interchangeable standard and ‚ optic height‚ cheek risers Optional QD sling mounting capability Integrated storage compartment in the grip Hinged storage compartment in the stock capable of storing up to 3 spare 10rd magazines MOE SL nonslip rubber butt pad Made in USA

categories:Sporting GoodsGuns

17376 impressions

1270 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2776 impressions

492 views

Brand new Magnification: 3x Fixed Eye Relief: 2.2" Field of View: 7.3° Water Resistant: Submersible to 33 ft (10 m) depth Sealing: Fog resistant internal optics Length: 3.9" Weight: 11.9 oz 1x to 3x Magnification - The ability to transition between the two distances almost instantly and still maintain weapon accuracy. Battle Tested - EOTECH is dedicated to providing rugged, reliable and innovative products that offer a true advantage to all who use them. Adaptable - The EOTECH magnifiers are designed to work for both left and right-handed shooters and all come equipped with a locking, adjustable quick detach lever system allowing for immediate attachment or removal.

categories:Sporting GoodsGuns

5164 impressions

481 views