Cheddite 209 primers are a dependable choice for shooters who need consistent and reliable ignition in their shotgun shells. These primers are crafted with precision to provide a stable and predictable firing response, making them a top pick for reloading enthusiasts. Cheddite 209 primers are primarily used for reloading shotgun shells. Their reliable ignition makes them suitable for a variety of shooting disciplines, including hunting, clay shooting, and defensive training.

categories:GunsSporting Goods

4222 impressions

514 views

Caliber: 338 WIN MAG Bullet Weight: 230 Gr Bullet Style: ELD-X Case Type: Brass Muzzle Velocity: 2810 fps Muzzle Energy: 4032 ft. lbs. Rounds Per Box: 20 Made in USA

categories:Guns

4960 impressions

488 views

Savage Axis II Overwatch Camo Synthetic Stock Bolt Action Rifle 30-06 Sprg (no Scope) 57488 Clearance Price !! Discontinued SKU !! Reduced from 759.99$ to 549.99$ also available........... 57488.......30-06 Clearance Price !! Discontinued SKU !! Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available AXIS II OVERWATCH Features commonly found in high-end hunting rifles can now be found in the AXIS II platform to provide increased performance and precision out of the box. The AXIS II synthetic stock features improved ergonomics and includes Mossy Oak Overwatch camouflage, the official pattern of the National Rifle Association. The low-friction cerakote coating on the barrel, receiver, and other critical parts is harder than competing finishes and protects against corrosion and heat. At just 2-4 microns thick, the coating does not interfere with the rifle’s functionality in the field. These high-end features, along with the user-adjustable AccuTrigger provide the hunter with reliable performance at an affordable price. FEATURES Ergonomic synthetic stock with newMossy Oak exclusive NRAOverwatch camo User adjustable AccuTrigger Drilled and tapped stainless steel receiver with Gunsmoke Gray cerakote finish 20 inch barrel Detachable box magazine EGW One-piece picatinny rail Specifications SKU Number :57488 Action : Bolt Barrel Color : Elite Smoke Cerakote (E-120) Barrel Finish : Cerakote Barrel Length (in)/(cm) : 20 / 50.8 Barrel Material : Stainless Steel Caliber : 30-06 Sprg Magazine Capacity : 4 Hand : Right Length of Pull (in)/(cm) : 13.75 / 33.0 Magazine : Detachable Box Magazine Overall Length (in)/(cm) : 40.5 / 101.6 Rate of Twist (in) : 1 in 10 Receiver Color : Elite Smoke Cerakote (E-120) Receiver Finish : Cerakote Receiver Material : Stainless Steel Type : Centerfire Stock Color : Camouflage Stock Finish : Matte Stock Material : Synthetic Stock Type : Sporter Weight (lb)/(kg) : 6.5 / 2.72

categories:GunsSporting Goods

25687 impressions

1920 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2685 impressions

443 views

Dillion Precision Reloading Machine Like New, Never Used $5250 obo Dillion Precision RL1100 ammunition reloading machine Dillion Precision variable speed automated case feeder, comes with mounting pole, small pistol plate, small rifle plate, large pistol plate, large rifle plate and case feeder mirror with flexible arm Numerous die plates for mounting individual calibres, without needing to remove to change calibres, including case trimmers and sizing/shaping dies being mounted, tool head conversion kits, , brings casing sizing back into SAMMI spec LED light mounted to provide better viewing of process Work bench mounting plate FW Arms auto center decappers/poppers and swagers included, with replacement pins Discharge tube for primers Discharge chute for finished ammo and receiving container Dillion Precision automated primer sorter, multiple tubes in small primer and large primer sizes, with spare tips Mr. Bullet automated bullet feeder, bullet feeder mirror with flexible arm, multiple bullet size feeder trays, dies and feeder tubes to tool heads Manuals, spare parts, spare sensors, tools, machine dust cover, case gauges, no go gauges All high quality equipment and replacement parts, no expense spared Dies for Lyman 9 mm, Lyman .223 cal 1 x 118 ml bottles of sheep Lanolin oil used for casing lube during processing Ammunition trays 9mm, 40 S & W, .45 ACP Contact Mike Logan cell 587-984-5851, mikelogan33833@yahoo.ca

categories:GunsSporting Goods

9504 impressions

539 views

I have 2 presses for sale $5250 each Dillion Precision Brass Processing Press Like New, Only Used to Test Setup $5250 obo each Dillion Precision CP2000 brass casing processing machine Dillion Precision variable speed automated case feeder, comes with mounting pole, small pistol plate, small rifle plate and case feeder mirror with flexible arm Numerous die plates for mounting individual calibres, without needing to remove to change calibres, including case trimmers and sizing/shaping dies being mounted, tool head conversion kits, brings casing sizing back into SAMMI spec Mark 7 Auto 1050 Pro motorization kit to fully automate CP2000 operation, touch screen operation LED light mounted to provide better viewing of process Work bench mounting plate FW Arms auto center decappers/poppers and swagers included, with replacement pins Discharge tube for primers Discharge chute for brass and receiving container Manuals, spare parts, spare sensors, tools, machine dust cover All high quality equipment and replacement parts, no expense spared Press #1 Dies for Lyman 9 mm, Lyman .223 cal, Redding .300 cal AAC Blackout Press #2 Dies for Lyman 9 mm, Lyman .223 cal, Redding .308 cal Win 1 x 118 ml bottles of sheep Lanolin oil used for casing lube during processing Contact Mike Logan cell 587-984-5851, mikelogan33833@yahoo.ca

categories:GunsSporting Goods

8672 impressions

443 views

For Sale $38,000 obo Willing to Part Out Brass Casing Processing and Ammunition Reloading Business I have for sale my brass casing processing and ammunition reloading business venture. Due to sudden health changes, I can no longer do this and have to sell quickly. Make me an offer. I have acquired all the equipment and raw materials to get the business up and running. There is enough brass casings to provide a return of approximately 25% to 40% of capital investment, at new prices. I have purchased all this equipment new, most of it imported from the USA, from Dillion Precision and Mark 7 to name a few, paying for all shipping and import duties. Due to these sudden health changes, I am no longer able to proceed with my home based business, and I have to sell it all immediately. My plan was to do this as a hobby, and take the processed brass to gun shows, farmers markets and other local and provincial events that I could attend. Processed brass does not require a PAL to possess and/or sell/purchase. Process brass that is unloaded does require a PAL to possess and/or sell/purchase. I am an avid hunter, sport shooter, and into long range accuracy as well. I was also going to reload my own ammunition with the same equipment, so I purchased the best possible for the most accurate and reliable brass and ammunition possible. I am not selling any gun powder, primers, bullets or completed ammunition. I would like to sell this as a package to an interested party. Breaking it up may make it less enticing to an interested party, but I may sell equipment individually if there is no interest in the whole package. Most of the equipment is unused, so it is in new condition. The rest of the equipment has limited use, to verify setup parameters and test end product for SAMMI specs and accuracy, so it is in near new condition. The brass is government issued, once fired, purchased through GCSurplus auction site. If you are skilled at brass processing and ammunition reloading, and are looking to expand your hobby into a small home based business that can turn a profit quickly, with reliable top quality equipment, this is what you are looking for. I have taken most of the guess work out of sourcing the proper equipment, providing all the operating and maintenance manuals to go along with equipment, with some resource books to help perfect your product. If you are part of a gun club that likes to process brass and reload their own ammunition, this is ideal for you. Please call me to view equipment, and I can answer any questions you may have. Please be aware, this is all high end processing and reloading equipment and it is not cheap to buy new. Yes, I am looking to sell, and yes I am will to negotiate, but be aware my price is still high, but not near the price you would pay to buy new today. I am asking $33,000 or best offer. Delivery and loading assistance can be arranged. Mike Logan 587-984-5851 mikelogan33833@yahoo.ca Edmonton, Alberta area

categories:GunsSporting Goods

5887 impressions

932 views

Remington 700 LTR (Light Tactical Rifle), chambered for .308 Win, it features a slimmed down HS Precision stock to improve portability and reduce weight. The stock incorporates a with full length aircraft aluminum bedding block stock that is Kevlar and fiberglass reinforced so it stays dimensionally stable under the worst of adverse conditions, hex-head Allen screws to secure the barreled action, and make the barrel free floating. It also has an extra sling stud at the front to mount a bipod like the Harris Bipod. The flutes in the 20″ LTR barrel not only assist in weight reduction and heat dissipation, but are engineered to enhance barrel rigidity for pinpoint accuracy and is finished with a crowned muzzle. It comes with Timney trigger make this rifle extremely accurate and also comes with Leupold Mark IV 20 MOA Picatinny Rail. The LTR was designed as a lighter weight, compact tactical rifle for urban situations but I find it perfect hunting rifle for its precision, compact and lightweight. I only fired it to break in the barrel and sight-in in the range and have it ready for hunting, around 150 rounds give or take. It’s .5 MOA groups guaranteed at 100 yards with 168 gr. match grade rounds. Will ship anywhere in Canada at buyers expense, also available for pick up and delivery in Edmonton, Alberta

categories:GunsSporting Goods

10351 impressions

1324 views

Brand new Shell carrier for the 12 gauge Remington 870 shotgun Holds seven (7) 12 gauge rounds Made of a precision molded polymer with an aluminum mounting plate Will not contact or interfere with the pump action forend when used with length forends Allows for the individual tension adjustment for each shell allowing the user to fine tune the sell carrier for specific ammunition Made in USA

categories:GunsSporting Goods

6858 impressions

401 views

Caliber: 300 WSM Bullet Weight: 200 Gr Bullet Style: ELD-X Case Type: Brass Muzzle Velocity: 2820 fps Rounds Per Box: 20 Made in USA

categories:Guns

4772 impressions

494 views

For Sale - one Lee Precision 25-06 Rem full length steel sizing 3 die set $75 - firm No trades or offers Brand new in box - new manufacture -full length sizing die -bullet seating die -crimp die (included) -powder scoop -shell holder -data, load chart, and instructions -handy red box & lubricant EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense via CP within Canada only. Small package/tracked to all provinces - $22 (small box) Text, email or leave message / unable to answer calls in remote areas. If this ad is up then item is still available.

categories:GunsSporting Goods

14685 impressions

1319 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:GunsSporting Goods

5569 impressions

512 views

Brand new Selected by the U.S. Army for both the Squad Designated Marksman Rifle System and for U.S. Special Forces, the Tango6T is available in the commercial market. Designed for today’s common MSR/AR and bolt action platforms, this scope is the ideal solution for CQB / mid-range tactical engagements, 3 Gun competitions and hunting. The Tango6T is complete with our HDX optical system for extreme clarity and low-light performance, HellFire fiber optic and glass-etched illuminated reticles, and first focal plane designs. HDX optics extra-low dispersion glass (ED) combined with high transmittance glass (HT) provide industry-leading light transmission and optical clarity for any situation Infinite Guarantee: SIG SAUER Electro-Optics are guaranteed forever. It’s an unlimited lifetime guarantee. HDX: Advanced optical systems comprising both High Definition (ED) and High Transmittance (HT) glass for ultra-high resolution, optical performance and light transmission. Hellfire Reticle: Electronically illuminated reticle system utilizes advanced fiberoptic technology to vary the light intensity of the central aiming point from IR (InfraRed) dim to HellFire bright for daylight illumination, resulting in a bright, defined aiming point for precision shot placement in any condition. LensArmor: Abrasion-resistant lens coatings for extreme durability ensure the lenses on your scope will stay sharp, bright, and clear. LenShield: Proprietary Mil-Spec oleophobic coating that sheds water, oil, and gunk to ensure a clean sight image at all times. LockDown Zero System: The LockDown Zero System is a stop-locking turret that allows a rapid return to Zero. After dialing up elevation for a shot at extended range, the LockDown Zero System eliminates worry over how far to turn the elevation dial to return adjustment to zero. Turret not only stops at zero, it locks at zero. Motac: Activated through motion sensing technology, MOTAC immediately powers up illumination when it senses motion and powers down when it does not in order to extend battery life. SpectraCoat: Highly efficient, ultra-wide broadband, anti-reflection lens coatings reduce surface reflections to extremely low levels across the entire visible spectrum providing superior light transmission. Stealth ID: Electro-Optics industrial design inspired by our legendary firearms; deflection armor trapezoidal surfacing breaks up the shape and visibility of the optic along with pistol slide serrations and grip checkering to add function to the form of all SIG SAUER electro-optics. HDX optics extra-low dispersion glass (ED) combined with high transmittance glass (HT) provide industry-leading light transmission and optical clarity for any situation 6x Super-Zoom Advanced Optical System Fast Focus Eyepiece Night Vision (NV) Illuminated reticle settings with locking illumination dial Laser engraved mounting line to align riflescope to scope rings Dependable waterproof (IPX-8 rated for complete and continuous immersion at 20 meters ) and fog-proof performance Power selector ring throw lever included with all models Covered by SIG SAUERs INFINITE Guarantee and Electronics Limited Warranty, see website for full details. Assembled in SIG SAUER optics factory

categories:GunsSporting Goods

20347 impressions

1853 views

Brand new Non-restricted Bolt action Caliber: 6.5 Creedmoor Capacity: 5-Round AICS Stock: Gray Magpul® Hunter American Barrel: 20", Free-Float, Cold Hammer-Forged, Threaded (5/8"-24) w/ Muzzle Brake Twist: 1:8" RH Safety: Manual Thumb Overall Length: 41.25" - 43.25" Length of Pull: 13" - 15" Weight: 9.2 lb. Magpul® Hunter American short-action stock featuring fully adjustable length of pull (spacers included) and comb height (available from Magpul®) and enhanced ergonomics. Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user adjustable between 3 and 5 pounds, allowing shooters to make that perfect shot. The one-piece, three-lug bolt with 70° throw provides ample scope clearance and utilizes a full diameter bolt body and dual cocking cams for smooth, easy cycling from the shoulder. Factory-installed, one-piece Picatinny scope base. Outstanding accuracy helps make every hunt a success. Heavy-contour (.850" at the muzzle) barrel features a Ruger Precision® Rifle Hybrid Muzzle Brake to effectively reduce recoil while minimizing noise and blast to the sides of the shooter. The visible, accessible and easy-to-actuate tang safety provides instant security. Also includes: one Magpul® PMAG® 5 7.62 AC magazine for reliable detachable box magazine compatibility. Made in USA

categories:GunsSporting Goods

12512 impressions

714 views

Selling my ATRS precision build 7 PRC M24 contour barrel, spiral fluted, krg bravo chassis. Lots went into this build and it’s incredibly accurate. Around 100 rounds out of it. I wanted to shoot it more but It spent more time in my save then getting used. Have videos of me shooting out to 800 yards and it’s capable of much more. I’m pretty firm on the price as you can’t have too many guns and I’d rather keep it than take a loss on it.

categories:GunsSporting Goods

1437 impressions

191 views

Brand new This is a slightly extended-length barrel, to comply with restrictions in Canada and elsewhere, requiring a 106mm barrel length. This barrel will fit the MR918/MR920/XR920. The spiral fluting reduces weight and adds somewhere for dirt and debris to exit when cycling. This barrel improves the shooting accuracy with its precision-machined design to drop in more easily and fit tight in critical lock up areas. 1/10″ Broach Cut Rifling – Safe with lead bullets. Black Nitride Finish Compatible Gun Models Include: Shadow Systems MR918/MR920/XR920 Elite, Shadow Systems MR918/MR920/XR920 Combat, G19 (Gen1, Gen2, Gen3, Gen4, and Gen5 G19) Made in USA

categories:GunsSporting Goods

2102 impressions

385 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:GunsSporting Goods

5020 impressions

394 views

Nosler(.308,200gr)-$130/100, BergerVLD Hunting(.308,210gr)-$125/box, Hornady((.308,200gr)-$80/box (5 box minimum) H1000-$80/lb, Superformance-$55/lb Hornady Precision Hunter 6.5cm-$50/box Text only please, (403)507-3066, PAL requied.

categories:GunsSporting Goods

1396 impressions

239 views

Savage Lakefield B22 FVSS-SR 22lr Bolt Action Rifle Synthetic Stainless Threaded Heavy Barrel 70232 619.99$ reduced to clear 449.99$ Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Overview Meet a bolt-action rimfire built for the modern age—and for the shooter’s body. The B22 FVSS-SR uses an ergonomically designed stock, higher comb, top tang safety and target style, vertical pistol grip to allow shooters to hold the rifle in a more natural position that puts less pressure on the wrist. Its a heavy, button-rifled barrel is suppressor ready and fed by a 10-round rotary magazine. The adjustable AccuTrigger™ gets the most accuracy from the precision platform. FEATURES Bolt-action 22 LR User-adjustable AccuTrigger 10-round rotary magazine Button-rifled, suppressor-ready heavy barrel Modern, ergonomic composite stock Top tang safety Drilled and tapped for scope mounts Specifications Action : Bolt Barrel Length : 21″ Barrel Material : Stainless Steel Caliber : 22 LR Magazine Capacity : 10 Hand : Right Length of Pull :13.5″ Magazine : Rotary Overall Length (in) : 39″ Rate of Twist (in) : 1 in 16 Type : Rimfire Stock Color : Black Stock Material : Synthetic Stock Type : Sporter

categories:Guns

12263 impressions

772 views

Brand new Compatible with 34mm Maintube 2″ Forward Cantilever Offset Height: 1.46″/37mm Quick Release Mechanism Mount on Picatinny/Weaver Rails Aluminum Construction Type III Anodized Finish Give your riflescope solid support using the EOtech 34mm PRS QD Cantilever Ring Mount. This cantilever adapter is compatible with 34mm maintubes and mounts on Picatinny or Weaver rails. It provides a 2″ forward offset for tailoring eye relief and head placement, and has a quick release mechanism for fast and easy attachment. The mount is made of aluminum with a Type III hard anodized finish and provides precision, stability, and strength when you attach your riflescope to your firearm.

categories:GunsSporting Goods

3339 impressions

543 views

-works great for the price, just upgraded -comes with instructions, charger (micro-usb), tripod, carrying case

categories:GunsSporting Goods

741 impressions

267 views