Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2869 impressions

419 views

Brand new SureFire SFMB muzzle brake suppressor adapters greatly reduce both recoil impulse and muzzle rise so that your weapon tracks straight back, keeping you on target for faster shot-to-shot recovery. The proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated for extreme durability, they are available for a variety of weapon calibers and muzzle thread specs, and every SFMB serves as a rock-solid mounting adapter for SureFire’s combat-proven SOCOM Series Fast-Attach® suppressors. The SFMB design incorporates multiple bearing surfaces to ensure superior suppressor alignment. Blind pilot holes at the 3 o’ clock and 9 o’clock positions enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. Blind pilot holes at the 6 o’clock position enable indexing the adapter at bottom dead center. All that’s required is a basic hand drill and appropriate drill bits. Offset porting delivers greatly reduced recoil impulse and muzzle rise, so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery Multiple bearing surfaces for superior suppressor alignment Precision machined from U.S. mill-certified heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Inspected for all critical dimensions including concentricity and alignment Pilot holes for tuning of muzzle brake and to pin-and-weld to rifle barrel as needed DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system Model Number: SFMB-762-M18x1.5 Caliber: .308(7.62) Thread Pitch: M18X1.5

categories:Sporting GoodsGuns

8609 impressions

584 views

Brand new Matching a wide zoom range with a bright objective lens and a reticle rich in hold points, the Riton Optics 5-25×50 X5 Conquer MRAD Riflescope is a versatile optic for serious hunters and shooters. This one-piece aluminum scope features a first focal plane, Christmas tree-style illuminated PSR reticle and MRAD-based turrets for dialing in precise elevation and windage adjustments. The large objective lens admits enough light for good vision even in low-light conditions, and the sight picture is sharp and clear through HD glass and multiple layers of anti-reflective coating. Riton’s R5 zero stop turrets adjust impact point at 1/10 MRAD, with a 21 MRAD total adjustment range. Zooming is effortless with the removable throw lever, and the fast-focus eyepiece makes it easy to sharpen your view of the reticle. The X5 Conquer is waterproof, nitrogen-purged fogproof, and tested to withstand 1200 Gs of recoil. 5-25x zoom magnification 50mm objective diameter Fully multi-coated HD glass 22.5-4.5′ field of view at 100 yards First focal plane Christmas tree style Red illuminated with six brightness levels and off settings in between 1/10 MRAD per click impact point correction 21 MRAD elevation and windage adjustment ranges Side-focus parallax adjustment, 10 yards to infinity 3.7″ eye relief 34mm maintube One-piece CNC-machined aluminum housing Type III hard anodized matte black finish Exposed zero-stop turrets Fast focus eyepiece with knurled zoom ring and removable zoom ring throw lever Nitrogen purged, fogproof and waterproof

categories:Sporting GoodsGuns

3738 impressions

551 views

Brand new Patent-pending design provides more than 98% flash elimination; virtually eliminates muzzle rise Serves as a rock-solid mounting adapter for SureFire SOCOM suppressors Multiple bearing surfaces provide suppressor alignment and prevent tines from ringing inside suppressor Port direction may be timed to optimize for right hand, left hand or neutral Precision machined from U.S. mill-certified, heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Individually inspected for all critical dimensions, including concentricity and alignment DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Installation requires no permanent modifications to weapon Durable construction delivers a long service life Color: Black Model No.: WARCOMP-556-M15x1 Caliber: 5.56x45mm NATO Finish: Matte black DLC coating Fabric/Material: US mill-certified heat-treated stainless steel Threads per Inch: M15x1 Gun Model: Heckler & Koch G36/HK MR223 Length: 3.6 in Weight: 3.9 oz Included Accessories: Suppressor Adapter

categories:Sporting GoodsGuns

6585 impressions

627 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2899 impressions

502 views

Brand new The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2. Made from precision cast black Melonite™ finished steel and compatible with both mil-spec and commercial-spec carbine receiver extensions. Features: Accepts any push-button QD sling swivel as well as the Magpul QDM Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Works with both mil-spec and commercial-spec carbine receiver extensions (buffer tubes) NOTE: The ASAP QD is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, and MOE® Rifle Stocks.

categories:Sporting GoodsGuns

5615 impressions

451 views

Brand new The Magpul forward sling mount is a sling attachment point for the Mossberg 590A1 series of shotguns designed to clamp directly onto the barrel and magazine tube. The sling Mount can be configured to accept either a push-button QD sling swivel or a one point clip in style attachment sling. It is constructed from precision cast steel that is melonite coated for enhanced wear and corrosion resistance. Made in USA

categories:Sporting GoodsGuns

7005 impressions

646 views

Cheddite 209 primers are a dependable choice for shooters who need consistent and reliable ignition in their shotgun shells. These primers are crafted with precision to provide a stable and predictable firing response, making them a top pick for reloading enthusiasts. Cheddite 209 primers are primarily used for reloading shotgun shells. Their reliable ignition makes them suitable for a variety of shooting disciplines, including hunting, clay shooting, and defensive training.

categories:Sporting GoodsGuns

4716 impressions

577 views

Sauer 404 Classic 30-06 Bolt-Action.22” Cold Hammer Forged Free-Floating Precision Barrel,NitobondX Barrel Coating,3+1 Shot Detachable Magazine,Walnut ErgoMax Style Stock,Sauer Quattro Adjustable Trigger,Adjustable Rear Sight,Fixed Front Sight,Made In Germany.Brand new in box.Local is preferred, but will ship at buyers expense.Further Lost insurance can be purchased by the buyer. Valid Pal a Must. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

12848 impressions

1178 views

Brand new The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in USA

categories:Sporting GoodsGuns

2345 impressions

405 views

Savage modal 10 308 win Jc 26” heavy barrel contour with his muzzle break Vortex venom 5-25x56 vortex precision rings Murphy precision stainless steel 20moa rail glades armoury large bolt handle mdt xrs chassis 12 round mdt metal mag mdt grnd pod bipod Hunt shield waterproof foam cutout case Only 40 rounds through it will shoot 1/4 inch at 100 yards with hornady factory match (please call or text and we can negotiate a price)

categories:Sporting GoodsGuns

5466 impressions

690 views

Brand new New SureFire Turbo Series handgun WeaponLight generates a tightly focused, 66,000-candela beam pattern Highly visible, integrated 5-milliwatt laser—available in red or green—helps you get on target quickly and accurately without requiring the use of your gun's iron sights Mounts securely to Universal rail-equipped or Picatinny rail-equipped handguns or long guns The Turbo Series version of our X400 handgun WeaponLight delivers a stunning 66,000 candela of intense, tightly focused, far-reaching white light with a hot spot that is tremendously effective, plus a highly visible laser—available in red or green—to help the user get on target quickly and accurately. You can count on the X400T-A to help you positively identify threats at extreme distances while also providing ample spill light to help you maintain situational awareness, and you can trust its laser to provide crucial visual guidance without acquiring your sights if you’re forced to respond from a non-standard shooting position. Ambidextrous switching provides one-finger control of momentary-on or constant-on activation. Its rugged, aerospace aluminum body is Mil-Spec hard anodized for scratch and corrosion resistance and seal Precision-engineered Turbo reflector delivers 66,000 candela of tightly-focused white light; the farthest-reaching beam of any SureFire X-Series handgun WeaponLight Choose the <5 mW / 635-nanometer red laser or <5 mW / 515-nanometer green laser. Both are visible to the human eye for rapid target acquisition from nonstandard shooting positions Integral ambidextrous momentary- and constant-on switching provides easy activation Attaches securely to both Universal and Picatinny accessory rails Weatherproof O-ring and gasket sealing ensure durability in rainy conditions High-strength aerospace aluminum body is Mil-Spec hard anodized for extreme durability Accepts optional pressure-activated DG and XT remote switches for precision control without altering grip on weaponke it weatherproof. The X400T-A delivers a standard of excellence you can trust with your life.

categories:Guns

4069 impressions

409 views

Looking to expand my gun collection. Open to lots of different options, precision 22lr, CZ etc. any semi auto 762 or 556 rifle. Antique handguns, large calibre 300win mag, prc etc I buy, sell and install car audio systems as a hobby and have a great used system I would trade for a gun It consists of a Kenwood KDC-X303 Bluetooth deck. (Retail is over $200) DC audio Level 3 15” sub in box (sub doesn’t look pretty but works good and have whole new recone kit I could install or give with if you want it to be brand new. New is well over $450CAD just for the sub. And a clarion 850rms amp. Could also throw in a full brand new Amp wiring kit. Used value on this system is probably around $600+ pretty easily. If you’re interested but have something worth more I could add install or add cash to make up the difference Thanks

categories:Sporting GoodsGuns

12703 impressions

581 views

Brand new Mount Base Part Number: 1301 Recon (0 MOA) 1.5" The AD-RECON mount features the Patented QD Auto Lock™ Lever system which has the following advantages: Does not require proprietary tools for adjustment. Can be adjusted with your finger or a flat blade screwdriver. Lever can be configured to lock to the front or the rear. Superior clamping surface to insure maximum rail engagement. The AD-RECON mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish. Precision machined from 6061 T6 Aluminum. Hard coat anodized for a lifetime of performance. Fully adjustable to fit both in spec and out of spec rail systems. American Defense MFG, LLC. products feature a lifetime warranty. Features the Patented QD Auto Lock Lever system. Made in USA

categories:Sporting GoodsGuns

3836 impressions

545 views

Brand new All steel construction Steel, rectangular sight post selectable between Match and Standard widths   —.040” Match width for increased precision   —.060” Standard width for maximum visibility Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks Elevation adjustment knob – no tools required Positive detents in both the up and down positions as well as on the elevation knob Standard AR height over bore when deployed, 45 deg. offset right-hand side NOTE:  All MBUS Pro Front Sights now come factory-equipped with the Enhanced Front Sight Post. There is no need to order one separately unless you are retrofitting an older MBUS Pro front sight. Enhanced Front Site Posts are not compatible with standard MBUS polymer sights. Only compatible with MBUS Pro OFFSET Rear sight MAG526.

categories:Guns

2831 impressions

420 views

Please text anytime 6476871484. Brand new. Made in USA high quality adapter. about 4 inches long. 12GA to 410GA Shotgun Adapter This will allow 12GA shotgun to shoot .410ga ammo. Designed for break-open style guns Precision machined made in USA This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a .410ga ammunition. This adapter is precision machined to the OD specifications of a 2 3/4 12GA shell plus and extra one and a half inch in front to make this adapter 4 inches long in total. It will easily fit into your break open shotgun barrel and accept any 410ga ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This is a smooth bore adapter. The cartridge side is precision CNC machined to the exact chamber dimensions (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 410ga ammunition. Surprisingly accurate!

categories:Sporting GoodsGuns

12740 impressions

1286 views

Savage Lakefield B22 FVSS-SR 22lr Bolt Action Rifle Synthetic Stainless Threaded Heavy Barrel 70232 619.99$ reduced to clear 449.99$ Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Overview Meet a bolt-action rimfire built for the modern age—and for the shooter’s body. The B22 FVSS-SR uses an ergonomically designed stock, higher comb, top tang safety and target style, vertical pistol grip to allow shooters to hold the rifle in a more natural position that puts less pressure on the wrist. Its a heavy, button-rifled barrel is suppressor ready and fed by a 10-round rotary magazine. The adjustable AccuTrigger™ gets the most accuracy from the precision platform. FEATURES Bolt-action 22 LR User-adjustable AccuTrigger 10-round rotary magazine Button-rifled, suppressor-ready heavy barrel Modern, ergonomic composite stock Top tang safety Drilled and tapped for scope mounts Specifications Action : Bolt Barrel Length : 21″ Barrel Material : Stainless Steel Caliber : 22 LR Magazine Capacity : 10 Hand : Right Length of Pull :13.5″ Magazine : Rotary Overall Length (in) : 39″ Rate of Twist (in) : 1 in 16 Type : Rimfire Stock Color : Black Stock Material : Synthetic Stock Type : Sporter

categories:Guns

13660 impressions

864 views

Brand new The M-LOK Paraclip Sling Mount is a steel clip-in sling mount for M-LOK compatible systems. It is constructed of high-grade, precision cast steel and has an extremely durable Melonite finish. With a low-profile and snag-free design it fits a wide range of clips, including the Magpul Paraclip. For use with M-LOK compatible hand guards and forends Accepts clip-style sling attachments such as our own Paraclip Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Length, Max: 1.8" Height, Max: 0.5" Weight, w/ Hardware: 1.0 oz.

categories:Guns

2476 impressions

405 views

Brand new Developed to improve precision and accuracy with any style or caliber of weapon, the Trijicon RMR (Ruggedized Miniature Reflex) Type 2 is designed to be as durable as the legendary ACOG. The RM01 is an LED sight powered by a standard CR2032 battery. Housed in rugged forged aluminum, the RMR Type 2 is extremely tough yet lightweight. New easy-to-use adjusters with audible clicks allow for quick windage and elevation adjustments. The new Trijicon RMR Type 2 is tougher than any alternative and suitable for military, law enforcement and hunting applications. Magnification:1x Bullet Drop Compensator: No Length: (in)45mm Weight: (oz)1.2 oz w/Battery Illumination Source: LED Reticle Pattern: 3.25 MOA Dot Day Reticle Color: Red Night Reticle Color: Red Bindon Aiming Concept: No Adjustment @ 100 yards (clicks/in): 1 Housing Material: Forged Aluminum Batteries: 1 CR2032 Lithium Battery Battery LifeUp to 2 years of typical use*, up to 5 years in dark storage. *When used at 70ºF (21ºC). Extreme temperatures (high or low) will affect lithium battery performance.

categories:Guns

5437 impressions

527 views

Brand new Compatible with 34mm Maintube 2″ Forward Cantilever Offset Height: 1.46″/37mm Quick Release Mechanism Mount on Picatinny/Weaver Rails Aluminum Construction Type III Anodized Finish Give your riflescope solid support using the EOtech 34mm PRS QD Cantilever Ring Mount. This cantilever adapter is compatible with 34mm maintubes and mounts on Picatinny or Weaver rails. It provides a 2″ forward offset for tailoring eye relief and head placement, and has a quick release mechanism for fast and easy attachment. The mount is made of aluminum with a Type III hard anodized finish and provides precision, stability, and strength when you attach your riflescope to your firearm.

categories:Sporting GoodsGuns

3759 impressions

609 views

Brand new Trijicon/RMR footprint collimator mount that works with Reptilia AUS and Geissele Super Precision scope mounts. It allows the use of a collimator for short-distance shooting without sacrificing the scope. The mount is designed to keep the collimator as close as possible to the scope without limiting visibility. Being made of anodized 7075 T6 aluminum ensures high durability and shock resistance. Features: ROF-45 mount for Trijicon RMR footprint collimator. Made of 7075-T6 aluminum Works with Reptilia AUS and Geissele Super Precision mounts Low weight

categories:Guns

2625 impressions

289 views