The Creedmoor’s big brother! Tikka T3 Sporter in 6.5x55. You get: $3000 - T3 Sporter rifle Heavy target barrel. Double set trigger- for target push forward to initiate a nearly imperceptible trigger pull or just pull it back at approximately 3 lbs $749.95 - MDT LSS-XL Gen2 chassis $476.95 - MDT SRS skeleton rifle stock. $146.00 - Anarchy outdoors enlarged Bolt Handle/ threaded knob. $90.00 - Leupold 20 MOA pic rail $34.95 - Hogue molded vertical pistol grip. $239.90 - 2x MDT AICS 10 round metal mags. Treats and recipes available for reloaders. This gun shoots. Period. But I’’ve got too many sitting around. My loss is your gain. Thank you.

categories:Sporting GoodsGuns

21261 impressions

1608 views

Hey, I have an excess amount of ramshot silhouette pistol powder. Looking to trade 1lbs for rifle powder Lemme know what you have. Thanks

categories:Sporting GoodsGuns

3228 impressions

285 views

ATI T3 Taclite adjustable 870 stock. - Fully adjustable with pistol grip. - Great shape. Just taken off and collecting dust. - Includes all mounting hardware. Asking $110.00 obo. Located in Spruce Grove but can meet in the general Edmonton area within reason. Will ship on buyers dime. Can FaceTime or provide more photos upon request.

categories:Sporting GoodsGuns

3691 impressions

357 views

H15 Steel Single Shot Rifle .30-30 Win Model Number H015-3030 Action Type Break Action Caliber .30-30 Capacity 1 Round M.S.R. Price $625.00 USD. Additional Specifications Barrel Length 22" Barrel Type Round Blued Steel Rate of Twist 1:12 Overall Length 37.5" Weight 6.69 lbs. Receiver Finish Blued Steel Rear Sight Fully Adjustable Folding Leaf Front Sight Brass Bead Scopeability Drilled and Tapped Scope Mount Type Weaver 82 Stock Material American Walnut Stock/Grip Style Pistol Grip Buttplate/Pad Black Solid Rubber Recoil Pad Length of Pull 14" Safety Rebounding Hammer Best Uses Target/Hunting/Large Game Embellishments/Extras Swivel Studs This firearm has been fired only once and has since been thoroughly cleaned and securely stored in my safe. It has only been taken out for regular maintenance and remains in excellent condition. First come, first served no holds. A valid PAL is required prior to purchase. Shipping and local delivery are available at the buyer’s expense. ***Not my photo, it’s only for reference.***

categories:Sporting GoodsGuns

65 impressions

13 views

I have a mint Pedersoli 1804 Potsdam Musket (smooth bore) in .75 (calibre)It is in immaculate condition with no rust or pitting. As it is a flintlock, it is listed as an antique so, no PAL is needed to own or possess this musket. Asking $1,500.00. Offers welcome. Local deals are preferred as shipping will be quite expensive for the buyer. So, I've had several comments that Antique firearms DO require a PAL and that I'm crazy. Well I am crazy but not about this subject. FYI Criminal Code of Canada Section 84(1) antique firearm means (a) any firearm manufactured before 1898 that was not designed to discharge rim-fire or centre-fire ammunition and that has not been redesigned to discharge such ammunition, or (b) any firearm that is prescribed to be an antique firearm; (arme à feu historique) Regulations Prescribing Antique Firearms Prescription 1 The firearms listed in the schedule are antique firearms for the purposes of paragraph (b) of the definition antique firearm in subsection 84(1) of the Criminal Code. SCHEDULE (Section 1) Black Powder Reproductions 1 A reproduction of a flintlock, wheel-lock or matchlock firearm, other than a handgun, manufactured after 1897. Section 84(3) Certain weapons deemed not to be firearms ·         (3) For the purposes of sections 91 to 95, 99 to 101, 103 to 107 and 117.03 of this Act and the provisions of the Firearms Act, the following weapons are deemed not to be firearms: ·         (a) any antique firearm;

categories:Sporting GoodsGuns

4140 impressions

187 views

Brand new in the box Keystone Overlander in .22 LR with threaded 16” carbon barrel, collapsible stock, pistol grip.

categories:Sporting GoodsGuns

3151 impressions

398 views

Antique status Swiss 1882 manufacturered by Waffen Bern. One of the most sought after antiques, this revolver is chambered in 7.5 Swiss ordnance which is still available from Fiocchi. This revolver is commonly used with .32 sw longs, although the cases may bulge. S&B .32 longs is not recommended as the case rims are smaller than normal and may cause light strikes, all other brands are functional. The revolver itself is in very good condition, lockup and timing are tight. The bore is shiny as most of these revolvers are. Bluing is in good shape. The gun comes with a custom western quick draw holster that is formed to the gun, with the standard right hand attachment point or the holster can be swapped to the left side for a reverse draw set up. Pick up available, shipping included with insurance on buyer. Good pistol for bushwhacking and ranch carry. The gun will also come with a copy of the frt and a hard case. Please inquire if you need more pictures. Cash or etrasfer only. No pal required, just proof of over 18 Please check with a gunsmith before firing any antique firearm for the first time

categories:Sporting GoodsGuns

5352 impressions

232 views

Brand new Non Restricted Caliber: 12 Gauge Overall Length: 29.5" Weight (unloaded): 9 pounds 12 ounces Barrels: 2 x 18 7/8”, chambered for 2 ¾” or 3" shells Chokes: Both barrels include spreader choke tubes with Tru-Choke thread pattern Capacity: 14 rounds in magazine tubes + 2 in chambers = 16 total  with indicator windows Action: pump action with two shots from single trigger, inline shell feeding Material: Patented polymer and aluminum frame Controls: Ambidextrous safety, ambidextrous pump slide release Grip: Co-Molded non-slip rubber pistol grip, composite front vertical grip Stock: Synthetic stock  Forend: Composite material with slots for MOE Rails Recoil Pad: Rubber with dual spring shock absorbing recoil mechanism Sling Points: Front sling attachment, sling swivel attachment on stock Part #: DP12GENIIBLK

categories:Sporting GoodsGuns

4321 impressions

201 views

Up for sale are some empty shot shell, rifle, handgun, & Military box's . Great for display in your toy room or next to your favoret gun. I just mite have . Lots more then what is in the pics. From $ 2.00 & up plus shipping.

categories:Sporting GoodsGuns

5796 impressions

341 views

Stevens. Mod 512 over under 20 gauge in new condition. With 6and half boxes of amo great gun for women or youth $640.00 Bought used hand full of times down sizing heard

categories:Sporting GoodsGuns

6107 impressions

611 views

Selling/trading a Remington Model 760 Gamemaster in .270 Win. Overall it's in nice shape. 22" barrel. Bluing has mostly faded to a light patina throughout. Wood stocks are in nice shape, normal marks here and there - nothing major. Bore is very nice. Comes topped with a Bushnell 3-9x40mm scope with a set of 1" see through Weaver rings and also has its original iron sights. Comes with one magazine and leather sling pictured (rear sling stud is mounted to bottom of pistol grip cap). Looking for $750 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

5024 impressions

482 views

2 pistol case

categories:Sporting GoodsGuns

4232 impressions

201 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

21038 impressions

1249 views

1) Win post 64 M70 Rear Sight w/ 2 screws - $135.00 . 2) Win post 64 M70 Front Sight w/ Insert, Hood & Screws - $175.00 . 7) Winchester Pistol Grip Cap Scroll Insert Only - $25.00 . --- . 21) Win pre 64 M70 - 22G Rear Sight w/o Elevator - $275 . 22) Win 3C - 6 Step Elevator - $50 . 23) Win pre 64 M70 Folding Rear Sight - .47" H - $100 . 24) Win pre 64 M70 - Front Sight Insert - $75 . 25) Win pre 64 M70 - Front Sight Hood - $40 . 26) Winchester Marksman - Target Stock - Sling Swivels - $150.00 . 27) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (without Pins) - $155 . 28) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (with Pins) - $175 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

60654 impressions

1152 views

Mossberg 500 spx Pump action 12 gauge Bandalier Adjustable stock Ghost sight Pistol grip Hard case Lots of ammunition Price is firm

categories:Sporting GoodsGuns

9650 impressions

709 views

For Sale - one bag of 100 pieces of new, unopened Starline 454 Casull unprimed brass. Perfect for that special pistol or rifle... WAS $125 $110 (new price) per bag - firm! No offers or trades 100 pieces per bag / 1 bags available Brand new unprimed - unfired 100 pieces / hard to find new brass anywhere EMT (shipped) or cash (at pickup) - pick up available by appointment only, house drop box or shipped at buyers expense by Canada Post within Canada only. Small package/tracked - $22 to all provinces

categories:Sporting GoodsGuns

16521 impressions

911 views

Prices A- Double Tap Trigger Over Travel Limiter - $20 B - Aperture Ghost Ring Sights Set - $20 C/D - Extended Magazine Release (Right and Left Handed) - $25 **$5 off each additional part for any order combo (2 or more) **Ex. A+B=$35-($5 discount)=$30 Total **A+B+C=$20+$20+$25=$65-2*($5 discount)=$55 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) Double Tap Trigger Over Travel Limiter - $20 Replaces the Factory Trigger Spring Plunger Reduce the Over Travel by 85% for Quick and easy "Double Taps" Machined Stainless Steel Aperture Ghost Ring Sights Set - $20 Replaces the Factory Open Sights Comes in a Set of Two (Large/Small Apertures) 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm) 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) Material: Precision Machined Stainless Steel Finish: Matte Black Oxide (Blued) Weight: 0.02oz (0.4g) **Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached** *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* Extended Magazine Release (Right and Left Handed) - $25 Replaces the Factory Magazine Release No Snag Design (Tab only on one side) Ergonomic Quick Index Finger Mag Release Compatible with the Charger Pistol Material: Precision Machined Aluminum Finish: Matte Black Anodize Weight: 0.56oz (16g) **Not compatible with older Metal Trigger Groups** **Mag Release does not fit certain aftermarket Archangel Stocks**

categories:Sporting GoodsGuns

61640 impressions

2566 views

ergo grip panels designed to mimic the handlings of other popular handguns, you can run ideas through I'll achieve them to the best of my ability!

categories:Sporting GoodsGuns

49377 impressions

2828 views

Caldwell® Matrix Shooting Rest Hardly used, like new. • U-channel frame quickly adjusts up to 4-1/2" • Open center channel provides plenty of clearance • Spring-loaded tension mechanism and height-adjustment Ultra-rigid U-channel frame quickly adjusts up to 4-1/2" in length to stabilize any gun, from a handgun to an AR-15. Open center channel provides plenty of clearance for high-capacity detachable magazines. Removable lid on the convenient storage area in the front of the base adds additional clearance when detached and doubles as a rubberized rear support surface when firing handguns. The front elevation system has a spring-loaded tension mechanism and a height-adjustment knob for precise one-handed elevation adjustments. Remove the rear portion of the frame to convert it into a compact front rest. Dimensions: 16.5 x 42 x 49.5cm (6-1/2" H x 16-1/2" W x 19-1/2" D). Front cradle height: 7-1/2" to 10-1/2". Weight: 5 lbs.

categories:Sporting GoodsGuns

504 impressions

137 views

Looking to sell or trade my Henry Steel Lever Action Rifle, 20.00" Barrel, Wood Stock, 30-30, guns only seen a handful of rounds, looking to sell or trade for a 45-70 looking for 1400$. Gun is flawless no scratches or blemishes feel free to text me at 780-385-8491

categories:Sporting GoodsGuns

3843 impressions

469 views

Looking for blank gun pistol (not revolver) something like an ekol p29

categories:Sporting GoodsGuns

1322 impressions

360 views