This ORIGINAL 1895 Marlin rifle was shipped from the New Haven, Connecticut factory on Apr. 29, 1903. Solidly built for the larger calibers, this one in 38-56 cal. and is in NRA fine condition. The receiver now appears as silver although its original case hardening pattern can still be made out. The rest of the metal has taken on a brownish patina. All numbers and lettering are sharp and legible. The barrel a 26 inch long smokeless steel SPECIAL order half round, half octagon version, with a 1/2 magazine. The bore is good with intact rifling and a bit of shine. The wood is a SPECIAL order walnut with a beautiful grain pattern on both the forearm as well as the butt stock. While no longer factory available the 38-56 caliber is equivalent to the 35 Rem. Reloading components are available from various sources. Marlin only produced only 18,000 Model 1895's, in contrast to Winchester producing 160,000 model 1886's which was the Marlin's counterpart and competition. This alone makes the Marlin a comparatively rare firearm. Factory Letter is included. All components that are numbered have been determined to be Matching! This includes the extra fancy stocks which do not show up in the letter. The purchaser will assume all shipping costs as well as any desired insurance. Please respond via email. Serious enquires only. Will ship Canada wide.

categories:GunsSporting Goods

16439 impressions

1618 views

Like new 35 mm scope rings. Can’t remember where I got these. No brand name on them but look like good rings. Excellent condition

categories:GunsSporting Goods

8384 impressions

206 views

1) Winchester pre 64 M94 - Carbine Blade Gold Beaded Insert - $95.00 2) Winchester pre 64 Model 94 - Front Sight Hood - $40.00 3) Winchester pre 64 Model 94 - Front Sight Beaded Insert - $75.00 4) Winchester pre 64 Model 94 - 22B Rear Sight - $350.00 6) Older Original 1A - 1B - 1C Elevators - $60.00 7) Winchester pre 64 Model 94 - 22G Rear Sight - $250.00 8) Winchester Model 94 - Rear Sight 3C - 6 Step Elevator - $50.00 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 12) Winchester 1873 - 1892 Saddle Ring Staple (only) - $65.00 Screws 14) 6-48 Filler Screws (4) - Blue   $20.00 15) Win 1890-06-62 Tang Screw  - 40.00 16) Win 1894-1892-1873 PG Tang Screw - 60.00 17) Win 1876-1886 Tang Screw  -  40.00 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 21) Win 1894 (pre 64) Magazine Plug Screw Long -   35.00 22) Win 1894 (pre 64) Finger lever pin stop screw - 40.00 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 24) Win 1894 (pre 64) Loading gate screw - 40.00 26) Win 1892 -1894 Forend Cap Screw (2) -  45.00 27) Win 1892 -1894 SRC Front Band Screw  - 40.00 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 29) Win 1885 Low Wall Tang Screw - 40.00 30) Win 1885 High Wall Tang Screw - 40.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

124390 impressions

7689 views

Brand New Non-Restricted Action: Lever Action Caliber: .45-70 Govt Barrel Length: 16.5 Inch Mag Capacity: 5 Front Sight – Drift Adjustable Rear Sight – Peep Hole Sight on Picatinny Rail Twist Rate – 1:12″ RH Grooves – 6 Overall Length – 35.50 In. Stock Material – Wood Frame Material – Alloy Steel Model Number: 954570161TB

categories:GunsSporting Goods

934 impressions

58 views

Hornady $40.00 Speer $35.00 Hodgson $30.00 Payment by cash at pickup. No other means accepted! Please, no telemarketing!!

categories:GunsSporting Goods

3699 impressions

292 views

1) Win Early Elevator - $40 2) Winchester 1A Elevator - dated (.207") - $60 3) Winchester 1B Elevator - dated (.162") - $60 4) Winchester 1C Elevator - no date (.175") - $60 5) Win 2C Elevator - .60"W x 1.625"L - $35 6) Win 3C - 6S Elevator - $50 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads.

categories:GunsSporting Goods

35077 impressions

763 views

1) Marlin S-25 Rear Sight & Elevator  -  $125.00  2) Marlin S-25 Rear Sight & Elevator - Stepped  -  $145.00 3) Marlin 39 (post 72) Folding Rear Sight & Elevator  -  $170.00 4) Marlin Front Sight Ramp (0.7" C-C) with Screws  -  $85.00 5) Marlin Front Sight Ramp Insert - (298")  -  $75.00 6) Marlin Hood (1972 to Present Day)  -  $60.00 7) Marlin Hood (pre 1972 Rifles)  -  $45.00 8) Marlin Bullseye Stock Inlay  -  $35.00 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45 10) 8-40 Pan Head Filler Screws (2) - Blue  -  $20.00 11) 6-48 Pan Head Filler Screws (2) - Blue  -  $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

48030 impressions

1569 views

Marlin Bull's Eye Stock Insert Qty of 1 = $35.00 Qty of 2 = $60.00 Qty of 3 or more = $25.00 each --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

12156 impressions

701 views

As of 2024-12-05, this product is no longer available for sale. Next expected availability October 2025. Stay strong Canada! Shipping across Canada included, *Email only please* 1 Part - $25 Shipped 2 Parts - $35 Shipped 3 Parts - $45 Shipped 4 Parts - $55 Shipped (Full Upgrade) *+$10 for the Low Profile Front Optic Rail **Any combination of the parts are available ***EMT is King Shipping via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design/invention/product) Double Tap Trigger Over Travel Limiter - Replaces the Factory Trigger Spring Plunger - Reduce the Over Travel by 85% for Quick and easy "Double Taps" - Material: Precision Machined Stainless Steel Extended Charging Handle - Replaces the Factory Charging Handle - 50% Longer and Knurled Finish for Easy Access - Material: Black Anodized Aluminum Extended Magazine Release Button - Replaces the Magazine Release Button - Larger Textured Protruded Release Button for Easy Access and Quick Magazine Change - Material: Black Anodized Aluminum Barrel Mounted Optic Rail - Mounts on the Barrel (Replaces Factory Rear Sights) - Prevents Optics from Losing Zero from Take Down - Rail Height is the same as the Receiver - Optional 3rd Mounting Hole. Rail can now be mounted forward/backwards 1/2". *Only 2 of 3 screws is sufficient for mounting. - Material: Black Anodized Aluminum Low Profile Front Optic Rail M-Lok - Mounts on the M-Lok handguard - Rail Height is the same as the Receiver - Designed to fit most front backup sights (BUS) secured via a single screw - 2x M-Lok Screw/Nut included - Black Anodized Aluminum

categories:GunsSporting Goods

159629 impressions

13813 views

Prices A- Double Tap Trigger Over Travel Limiter - $20 B - Aperture Ghost Ring Sights Set - $20 C/D - Extended Magazine Release (Right and Left Handed) - $25 **$5 off each additional part for any order combo (2 or more) **Ex. A+B=$35-($5 discount)=$30 Total **A+B+C=$20+$20+$25=$65-2*($5 discount)=$55 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) Double Tap Trigger Over Travel Limiter - $20 Replaces the Factory Trigger Spring Plunger Reduce the Over Travel by 85% for Quick and easy "Double Taps" Machined Stainless Steel Aperture Ghost Ring Sights Set - $20 Replaces the Factory Open Sights Comes in a Set of Two (Large/Small Apertures) 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm) 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) Material: Precision Machined Stainless Steel Finish: Matte Black Oxide (Blued) Weight: 0.02oz (0.4g) **Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached** *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* Extended Magazine Release (Right and Left Handed) - $25 Replaces the Factory Magazine Release No Snag Design (Tab only on one side) Ergonomic Quick Index Finger Mag Release Compatible with the Charger Pistol Material: Precision Machined Aluminum Finish: Matte Black Anodize Weight: 0.56oz (16g) **Not compatible with older Metal Trigger Groups** **Mag Release does not fit certain aftermarket Archangel Stocks**

categories:GunsSporting Goods

56214 impressions

2374 views

Hornady Gas Checks Caliber 22, #7010, Sold 7mm#7060, 2000, 60.00/1000 + shipping 35 #7110, 3000, 65.00/1000 + shipping SOLD 44 #7130 Sold Lyman Gas Checks Cal; 35, 70.00/869 + shipping SOLD

categories:GunsSporting Goods

10815 impressions

862 views

*Made from ultra-soft and ultra-stretchy rubber material. *Fits Glock 17, 19, 20, 21, 23, 25, 31, 32, 34, 35, 37, 38. *Also fits S&W MP9, Sig Sauer and GSG pistol. *Its ventilated designing make your hand comfortable and dry. *Tactical enhancer, offers enhanced non-slip grip control and helps to absorb recoils.

categories:GunsSporting Goods

20744 impressions

603 views

*The PMAG 17 GL9 is compatible with all full-size, compact, and sub-compact double-stack Glock 9mm variants with some protrusion below the grip. *Made in U.S.A. * 35$ Each -------------------------------------------------------------------- Shipping with extra cost. Text or email please. You could also check my other ads, there might be something you like. Thanks!

categories:GunsSporting Goods

27374 impressions

2161 views

Heres some premium ammo for sale 270 nosler accubond longrange 150 gr,$65, 223 premium 35 gr,$45,,22-250 premium $45, and some premium 12 gauge loads

categories:GunsSporting Goods

53040 impressions

1937 views

Anschutz Front Sight Hood $35.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

28627 impressions

851 views

2) Ithaca High Standard Elevator - .850" W x 1.00" L - $30 3) Elevator X - .104" W x 0.89" L - OAL = 1.65" - $35 4) Cooey Elevator - .075" x 1.21" - $15 5) Husqvarna Elevator - $45 6) Marble Double Step - Rifle Elevator - $35 7) Marble Double Step - Carbine Elevator - $35 8) Marlin Elevator M1 - Marlin S-25 Sight - .046" W x 1.60" L - $35 9) Marlin Elevator M2 - Marlin S-25 Sight - .055" W x 1.60" L - $35 10) Marlin Elevator (336 - 1894 - 1895) - .115"W x 1.43"L - SOLD 11) Marlin Early Fishhook Elevator- .075" W x 1.22" L - $35 12) Marlin Elevator - Marlin S-27 Sight - .095" W x 1.15" L - SOLD 14) Remington 98 1/2 Sight - 105 Elevator - Round Barrel Model 12 Rifles - $45 15) Remington "R" Elevator (701 1/2) - .057" W x 1.11" L - SOLD 16) Savage Folding Sight Elevator - .061" W x 1.13" L - $40 17) Savage Fishhook Elevator - $40 18) Savage 1899 Elevator - .095" W x 1.05" L - OAL = 1.27" - SOLD 19) Savage 99 Elevator - .095" W x 1.15" Lo - $40 21) Savage 24 Elevator (Replacement Style) - $25 22) Win Early Elevator - $40 23) Winchester 1A Elevator - dated (.207") - $60 24) Winchester 1B Elevator - dated (.162") - $60 25) Winchester 1C Elevator - no date (.175") - $60 28) Win 2C Elevator - .60"W x 1.625"L - $35 29) Winchester 3C - 6S Elevator - $50 - 31) 6-48 Filler Screws (4) - Blue $20.00 32) 6-48 Pan Head Filler Screws (4) - Blue $20.00 33) 6-48 Filler Screws (4) - Stainless $20.00 34) 8-40 Pan Head Filler Screws (2) $20.00 35) DT-1 - 3/8" DT Filler - Blue - Curved Top - $45.00 36) DT-2 - 3/8" DT Filler - Stainless - Curved Top - $50.00 - 40) Husqvarna Front Sight Hood - $85 41) Marlin pre 72 Round Front Sight Hood - $45 42) Marlin post 72 Front Sight Hood - $60 43) Sako - Finnwolf Hood - $85 44) Browning (Japan) BLR - BAR Front Sight Hood - SOLD 45) Parker Hale Front Sight Hood - $85 46) Browning (Belgium) Safari Front Sight Hood - $85 47) Winchester Model 9422 Front Sight Hood - $40 48) Winchester post 64 Model 94 Front Sight Hood - $40 49) Winchester pre 64 Model 94 Front Sight Hood - $40 50) Winchester Model 70-88-100-64-65 Front Sight Hood - $40 51) Winchester post 64 Model 70 Front Sight Hood - $75 52) Winchester post 64 Model 70 Front Sight Hood (Long) - $85 53) Winchester (97 Sight - Model 69) Front Sight Hood - $75 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

195118 impressions

2755 views

DOMINION BRAND COLLECTIBLE AMMUNITION BOXES 35 REMINGTON 20ROUNDS 300 SAVAGE 20ROUNDS 30-30 20ROUNDS $100 EACH, 20 rounds per box EMT OR CASH PAYMENT ONLY CONTACT: cell text 819-923-9242 – or email; toymacram@hotmail.com

categories:GunsSporting Goods

1723 impressions

197 views

1) Marlin 336 - 1894 Front Barrel Band Screw (pre 84) - $45.00 each for one screw - $40 each for 2 or more 2) Marlin 336 - 1894 Front Barrel Band Screw (post 84) - $45.00 each for one screw - $40 each for 2 or more 3) Marlin 336 - 1894 Rear Barrel Band Screw - $45.00 each for one screw - $40 each for 2 or more 4) Marlin Tang Sight Screws (2) - $45.00 --- 5) Marlin Bullseye Stock Inlay - $35.00 6) DT-1 Marble's 3/8" Dovetail - Curved Top - $45.00 7) 8-40 Pan Head Filler Screws (2) - Blue - $20.00 8) 6-48 Pan Head Filler Screws (2) - Blue - $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

14442 impressions

311 views

Clearing out the following mags..... CZ 452 17 HMR 10 round, NEW $45.00 CZ 512 22LR, 25 round, have 2 $35.00 each Ruger 77 22LR $30.00 Ruger 77 22mag/17hmr $30.00 A-Bolt 280 Rem $75.00 X-Bolt 6.5 creedmore $60.00 X-Bolt standard long action $65.00 Marlin 89 22LR $40.00 Savage 99 243/308 $175.00 Tikka LSA 55 308, have 2 $200.00 each XPR standard short action $30.00 Mossberg 14A 22LR $30.00 Tikka T3 6.5 PRC extended $85.00 CIL 830, 222Rem $50.00 A-Bolt 7mm Mag $75.00 Remington 760 308 $75.00 Remington 7600 30-06 $50.00 A-Bolt 260 Rem NIB $100.00 Marlin 17 HMR silver, 2 of them $35.00 each A-Bolt 204 Ruger $85.00 Shipping is on you!

categories:GunsSporting Goods

8179 impressions

442 views

New in box. Fits all Tikka T3 and T3X, SA or LA New $49.99 $35 or $40shipped Located in Airdrie

categories:GunsSporting Goods

21267 impressions

518 views

Fabarm chokes EXIS HP, INNER HP & INNER All new most in packaging Exis HP 9/10 extreme 7/10 Long $45 per or both for $80 Inner HP Cylinder - SOLD OUT 2/10 Short IC 5/10 Medium Mod 7/10 Long IM 9/10 Xtreme 12/10 Ultimate $35 per Deals on multiple One choke case free with the first sale of 2 or more chokes Inner- all new in choke holder Cylinder Imp Mod Imp Mod Full $20 per, deals on multiples Choke wrench $40 or $20 if you buy more than $100 worth of tubes Shipping available

categories:GunsSporting Goods

17454 impressions

604 views