Will ship at buyer's expense, prefer local sale. Must have PAL. $625 or best offer Completely unshot and unused mossberg 590 tactical that I bought. Selling off most of my unused firearms. Model: 590 Tactical Caliber: 12ga Chamber: 3" and 2-3/4" Mag capacity: 6+1 Pump action Non-restricted 7.25 lbs Comes with the UTG picatinny rail installed

categories:GunsSporting Goods

10398 impressions

655 views

Text for list of upgrades. Comes with everything pictured. Priced to sell

categories:GunsSporting Goods

6406 impressions

697 views

Selling like new Mesa Tactical Aluminum SureShell Carrier w/ Rail - Benelli M4, 6-Shell Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mount via a “saddle” style method (Remington shotguns) or by using the drilled and tapped holes on top of the shotgun’s receiver. SureShell Aluminum Shotshell Carriers with Rail are machined from 6061-T6 aluminum and use Mesa Tactical’s innovative rubber friction retention system to firmly and reliable hold shells in place until needed. Four, six and eight shell configurations and multiple rail lengths available. The Integrated Rail SureShell shotshell carrier design for the Benelli M2 Tactical, Benelli M4/M1014, Benelli SuperNova and Mossberg 500/590 platforms is radically different from the side mount designs. Instead of a stamped backing plate, the shell carrier yoke is attached to a machined bracket with an integral Picatinny (MIL-STD 1913) sight rail. The design allows the ShotShell assembly to be installed on the top of the shotgun by taking advantage of the factory tapped Picatinny (MIL-STD 1913) rail holes. With the Benelli shotguns, the shell carrier assembly is mounted directly onto the shotgun receiver. With the Mossberg platforms, a steel mounting cleat is first installed and the shell carrier is fastened to the cleat. Forend Compatibility: Factory shotgun forends, except “tactical” forends, often feature significant receiver overlap when the bolt is pulled back. These forends will need to be cut down or replaced with aftermarket “tactical” forends to be used with some SureShell shotshell carriers. Before you install a SureShell shotshell carrier, measure your forend’s receiver overlap and compare it to the furthest forward point of the shotshell carrier. Then cut any potential overlap or interference off the end of the forend with a miter saw or a rotary arm saw for a perfect fit.

categories:GunsSporting Goods

11694 impressions

620 views

Mossberg 12 Gauge 590 in stainless. It’s in very good shape. Not used much, it’s ready to go.

categories:GunsSporting Goods

18745 impressions

2049 views

Brand new Pump action Mag fed Non restricted Caliber: 12 gauge Chamber: 2.75" Barrel:  18.5"  Capacity: 10+1 Sights: Bead Front  Choke: Cylinder Bore Stock: Synthetic  Overall Length: 39.5"  Pull Length: 13.87" Weight: 7.75 lbs  Coming with: One 10 Rounds Magazine Cable lock Made in USA

categories:GunsSporting Goods

3808 impressions

228 views

Brand new  Pump action Non restricted Caliber: 12 gauge Chamber: 3" Capacity: 6+1 Barrel length: 18.5" Cylinder Bore Heavy-Walled Barrel Sight: Bead Sight LOP Type: Fixed LOP: 13.87" Stock Finish: Synthetic (Black) Full Length: 39.5" Made in USA

categories:GunsSporting Goods

7187 impressions

570 views

Brand new  Pump action Non restricted Caliber: 12 gauge Chamber: 3" Capacity: 6+1 Barrel length: 18.5" Cylinder Bore Sight: Ghost Ring, Fiber Optic Front Mossberg FLEX Compatible Adjustable LOP (6 Position Stock Installed) Length of Pull: 10-3/4″-14-1/4″ Overall Length: 36.37″- 31″ Weight: 7-5.75 lb FLEX Furniture (Matte Black Finish) Matte Blued Finish Coming with one extra Mossberg FLEX Pistol Grip Made in USA

categories:GunsSporting Goods

6881 impressions

423 views

Brand new This kit essentially provides a conversion to 590S functionality, but in a more robust design. It contains patent-pending Universal Cartridge Adapter and low-drag no-snag Magazine Follower which allows smooth cycling of 1-3/4" Minishells up to 3" Magnum cartridges in the same magazine. This kit is compatible with any Mossberg 12-Gauge pump-action firearm with a 3" Chamber and machined grooves in the receiver.

categories:GunsSporting Goods

3868 impressions

412 views

Brand new Shell carrier for the 12 gauge Mossberg® 500® / 590® shotgun Holds seven (7) 12 gauge rounds Made of a precision molded polymer with an aluminum mounting plate Will not contact or interfere with the pump action forend when used with length forends Allows for the individual tension adjustment for each shell allowing the user to fine tune the sell carrier for specific ammunition Made in USA

categories:GunsSporting Goods

4852 impressions

387 views

Brand new The Magpul forward sling mount is a sling attachment point for the Mossberg 590A1 series of shotguns designed to clamp directly onto the barrel and magazine tube. The sling Mount can be configured to accept either a push-button QD sling swivel or a one point clip in style attachment sling. It is constructed from precision cast steel that is melonite coated for enhanced wear and corrosion resistance. Made in USA

categories:GunsSporting Goods

5391 impressions

512 views

Brand new The Mini-Clip 2.0 was better than the original but the opportunity presented itself to go further using new highly efficient mold/manufacturing partners right here in Texas. The Mini-Clip 2.0 Flex has the flexibility to accommodate a wider range of short shell lengths, should Aguila ever want to make an even shorter (or longer) Minishell. Re-loaders were very interested in this accommodation as are buyers of Exotic Products Shorty shells in varying lengths. The 2.0 Flex will feed all but the longest in their line, the 3 Buck. Allows use of 12ga 1.75” Birdshot, Buckshot, and Slug shells                  Fits: 12ga Mossberg 500, 590, 590A1, and Maverick 88 models Use with Aguila Birdshot, Buckshot and Slug offerings in Mossberg 12ga 500, 590 and Maverick 88 models Easily installs and uninstalls in seconds to allow use of 1.75", 2.75" or 3" shells as desired by user Practice with less expensive Aguila birdshot as the recoil response vs. Aguila buckshot is slight Low recoil of buckshot allows for safe, easy and comfortable aiming and discharge with pistol grip configurations (with proper grip/face clearance, of course). Not confined to hip and laser shooting Mini-Clip stays in well, but may want to tape in with electrical or Gorilla tape for close contact or heavy foliage environment applications

categories:GunsSporting Goods

7060 impressions

443 views

Brand new Factory Mossberg 14″ barrel conversion kits for the Mossberg 500/590/590A1 series of shotguns. This kit gives you everything to make your Mossberg shotgun into a short barreled shotgun. All the parts have a parkerized finish. Included 14″ Barrel Tube Nut Magazine Cap Magtube Magazine Spring Retainer Magazine Spring Forearm Action Slide Assembly

categories:GunsSporting Goods

5494 impressions

556 views

New 590 Mossberg Marine line launcher 12 gauge pump shotgun 20” marine cote With all the accessories and case Product code 50298 Unfired No trades Can ship

categories:Guns

25063 impressions

2392 views

Custom mod 590 with magpul stock and pum action, and 6 shell quick load attached.

categories:GunsSporting Goods

2325 impressions

636 views

3D printed Mossberg 500/590/835 4x shell holder This design utilizes the existing picatinny rail screw holes on the Mossberg 500, 590 and 835. it holds 4 extra shells on the side of the shotgun. I used M4X8 hex head screws to attach to the shotgun. Which are included in sale. I have hunted with this attached to my Mossberg with no issues and without the shells falling out. you can also wrap it in camo to blend in with a wrapped shotgun Two designs available, with picatinny rail and without Shipping available.

categories:Guns

12621 impressions

1115 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1 series shotguns, adding modularity, comfort, and customizability to the mossberg platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. Not compatible with the optional Mossberg heatshield. Removal is required before use. Not compatible with the 590M shotgun.

categories:GunsSporting Goods

4632 impressions

374 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1 series shotguns, adding modularity, comfort, and customizability to the mossberg platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. Not compatible with the optional Mossberg heatshield. Removal is required before use. Not compatible with the 590M shotgun.

categories:GunsSporting Goods

5278 impressions

463 views

Brand new Can be Fired in Opened or Folded Position Quick Release Button Allows Stock to Lock in Folded/Unfolded Position Textured Pistol Grip Ambidextrous Pre-Drilled to Accept Shotgun Shell Holder Easy Installation Sling Swivel Stud Included DuPont® Extreme Temperature Glass Reinforced Polymer Stock Limited Lifetime Warranty Made in USA Fits Most 12 GA Maverick 88, Mossberg 500/535/590/835, Remington 870 and Winchester 1200/1300 Shotguns

categories:Guns

10782 impressions

601 views

I am looking for a Mossberg 590 heavy 18.5” barrel, and the magazine tube.

categories:GunsSporting Goods

2443 impressions

198 views