2 boxes of Federal Fusion 165 gr -$80 for both boxes 1.7 boxes of Remington Core-Lokt 150 gr (13 rounds in one of the boxes) - $50 for both boxes I’m in Lacombe, AB but willing to meet in and around the area.

categories:GunsSporting Goods

581 impressions

48 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 New Model No. 3 Top Break, .44 Special / Russian Revolver. This one is in very good condition with longer 1 9/16 cylinder and can shoot both .44 Special and 44 Russian ammo. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6.5-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 10438, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

848 impressions

415 views

8 mm mauser ammo 20x170 gr SP new o/s $30 16 reloads$20 100 mixed old 12 guage $30 10+and brass 25-06 reloads $20 303 Dominion box and 19 cartridges $60 3 full boxes CIL .22 short $45

categories:GunsSporting Goods

34111 impressions

2292 views

***FREE SHIPPING***LIMITED TIME*** ***NEW IN BOX*** Inertia-Operated Semi-Auto In 12 GA X 3″ 28″ Vent Rib Barrel ,4+1 Capacity Fiber Optic Front Sight , Realtree Max-7 Finish Synthetic Stock , Oversized Bolt Release and Handle , 3 Interchangeable Crio Plus Chokes (Full, Modified, Improved Cylinder) , Rubber Recoil Pad . ( All Canada shipping via Canada post and shipping at the buyer's expense )  you need valid Pal   the only payement accept is E-Transfer or cash  the best way for communacation is TEXT CEL PHONE , OR EMAIL ME toymacram@hotmail.com or by Townpost  NO TRADES NO LOW BALLERS

categories:GunsSporting Goods

612 impressions

54 views

WW1 Swiss Model 1914 Pioneer Sawback Sword bayonet Sawback sword bayonet for use on the 7.5 mm. Schmidt-Rubin M1911 carbine and the M1931 Short Rifle (K31). The M1914 has a swell-point blade profile, where the blade is wider at the point than at the ricasso. The 1914 blade is fullered on only one side. The right side of the blade has the initials HS stamped immediately in front of the guard for the Maker Hans Steimer With the Swiss proof mark stamped below the initials. The back of the blade has an aggressive saw blade which starts 1” in front of the guard and extends to 14” from the guard. The right side of the guard has the number 478681 stamped in it. The release button works as designed. The scabbard is in good condition with the original leather attachment strap included. This bayonet was manufactured by Paillard with their mark stamped on the end of the scabbard. Overall Length – with blade in scabbard - 25” Length of Bayonet – 23 7/8” Length of Grip including the Guard – 5” Blade Length – 19 3/4” The M1914 was issued to select troops. When equipped with K31 rifles, the M1914 bayonet was issued to: —Engineers; —Driver corporals and mounted artillery sergeants; —Blacksmiths, blacksmith private first class or lance corporal, blacksmith sergeants; —Horse transport soldiers, PFCs, corporals and sergeants; —Saddle makers; and, —Drivers for motorized field artillery, howitzers and heavy howitzers. Good Condition $400.00 Thanks, Phil

categories:GunsSporting Goods

7887 impressions

408 views

For sale is a 37 mm m16 brass case in nice condition. See pics. $ 110.00 plus shipping. Can take reasonable offer.

categories:GunsSporting Goods

775 impressions

69 views

Brand New Including Flash Hider or Thread Adapter (CMMG part #57DA53A). Length:10.4″ Material: 4140 Chrome Moly Vanadium Finish: Chrome Lined Maganese Phosphate Coated Barrel Twist: 1:9 Twist Caliber:5.7×28 Chamber Thread: Threaded M12x1.0 LH Item Number: CMMG-57DF1C7

categories:GunsSporting Goods

1338 impressions

56 views

BRAND NEW , NEVER FIRED OR LOADED , MINT CONDITION 45LC Model 1892 Deluxe Trapper, Takedown , COLOR CASE , 16in OCTOGONAL BARREL , WOOD GRADE III/IV , MAGAZINE CAPACITY 7 , ( All Canada shipping via Canada post and shipping at the buyer's expense ) you need valid Pal the only payement accept is E-Transfer or cash the best way for communacation is TEXT CEL PHONE , OR EMAIL ME toymacram@hotmail.com or by Townpost NO TRADES NO LOW BALLERS

categories:GunsSporting Goods

7518 impressions

666 views

01.Leupold VX III 6.5-20×40 Long Range,Fine Duplex,30 mm tube,Matte.Long Range Scope.Low Profile Turrets.Side-Focus Parallax Adjustment.Slight ring marks, crystal clear optics.-$900.00 02.Leupold VX-Freedom 2-7x33 Riflescope, Hunt-Plex reticle,Waterproof, fogproof, & shockproof, black,1 inch tube.-SOLD 03.Leupold Vari X III 3.5x10 adjustable objective, gloss black finish,Duplex reticle, small use marks.Optics are as new.-$650.00 04.Leupold VX-III Rifle Scope 3.5-10X40mm, Clear bright optics with Duplex Reticle,Silver,1 inch tube. Some ring marks. Good condition.-SOLD 05.Leupold M8-4X Gloss Rifle Scope,Clear bright optics with duplex reticle-SOLD 06.Leupold VX-Freedom 4-12x40mm Riflescope,Eye Relief 3 inches, Duplex, Matte Black, 1 inch tube.-$580.00 As, new. 07.Leupold VX-6HD Rifle Scope 30mm Tube 1-6x 24mm,2ND GEN,SMR2 Reticle, MultiGun Custom Dial System (CDS-ZL2 ZERO LOCK ADJUSTMENT) Illuminated,Black Matte,30mm Tube.-$1750.00 08.Leupold VX-3i 4.5-14x40mm Riflescope, Black,1 inch Tube,Duplex reticle, Matte finish.-$300.00 (Not original/China).Not authentic Leupold products. 09.Leupold Mark-4 M1 3.5-10×40 Long range Illuminated R&G Side Wheel Optical Rifle Scope.-$350.00 (Not original/China). 10.Redfield Revolution 3-9x50mm.Matte,1" tube, 4-Plex reticle.Mint.-$500.00 (Manufactured by Leupold). Some scopes could be have some scratches and marks from being mounted. The buyer must pay Canada Post. Please send message to: medal1958@gmail.com

categories:GunsSporting Goods

84709 impressions

6876 views

I have the following factory ammunition for sale: 2 x rem 45-70-300 grain $45 each 1 x federal 30-30 - 170 grain $45 1 x federal fusion 308 - 180 grain $60 2 x Barnes 7mm rem mag 160 grain $140 (4 rounds short in one box) All boxes are full with the exception of one box of 7 mm ammo which is 4 rounds short. Absolutely will not ship ammo. PAL will be verified.

categories:GunsSporting Goods

7828 impressions

292 views

410 Ammo. Troy Brand. 3”&2.5” #7.5 3

categories:GunsSporting Goods

39428 impressions

1928 views

CZ 600 Alpha in 7.62x39. Barrel 18", synthetic stock, 5 round magazine, adjustable trigger, 5/8x24 threaded barrel. Brand new in box, I'm asking 800$ + shipping. No trade, firm price. Free with 60 rounds corrosive ammo if you cover shipping fee 23$.

categories:GunsSporting Goods

2480 impressions

268 views

Description - 3D Printed Free Float Barrel Tray/Stiffener Plate. - Replaces stock Barrel Tray to Free Float the barrel and stiffen the forend of the stock. Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design). Specifications - Material: PLA+ (Polylactic Acid Polymer) - Finish: Black - Weight: 1.1oz (30g) - 3D Printed Fill: 100% (Solid Plastic) - 3D Printed Resolution: 0.008" (0.2mm) - **This is a 3D Printed part, it was constructed via layers of melted plastic. Minor imperfection such as layer lines and start/end seams are to be expected. The part was fully inspected and guaranteed to function as intended. See image attached** - *Screws not included. Must use original screw(s) provided by Savage or source new screws.*

categories:GunsSporting Goods

16407 impressions

494 views

Description - Thread Protector with high temperature retaining O-Ring (up to 400°F) - Friction and Compression of the O-Ring retains the Thread Protector and prevents it from loosening off *Extreme rapid discharge will result in temperature exceeding 400°F and loosen the Thread Protector Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Tracked shipping (for an additional cost) available upon request. Brand: Created by Cay (Yes it's my original design) ___________________________________ What's Included - 1x Thread Protector 1/2"x28" - 1x Viton O-Ring Thread Protector Specifications - Material: AISI 4140 Steel - Finish: Knurled Matte Black Oxide (Blued) - Weight: 0.5oz (14g) - Dimensions: OD: 0.728" (18.5mm) / Length: 0.492" (12.5mm) - Weight: 0.5oz (14g) O-Ring Specifications - Material: Viton® Fluoroelastomer Rubber - Finish: Black - Max Temperature: 400°F (204°C) - Hardness: Durometer 75A (Medium) - Dimensions: OD: 0.591" (15mm) / ID: 0.472" (12mm) / Width: 0.060" (1.5mm) - Finish: Black *5/8"x24 coming soon Instructions 1. Check and make sure the firearm is unloaded. 2. Loosen off the stock thread protector or muzzle device in the counter clockwise direction. 3. Clean the thread (if necessary). 4. Install the High Temperature O-Ring over the threaded barrel. Do not overstretch the O-Ring, light pressure is sufficient the slide the O-Ring over the threads. 5. Install the Thread Protector in the clockwise direction. 6. Note that the Thread Protector can be installed in either directions. The smooth direction facing the O-Ring for more compression/friction or the cutout direction facing the O-Ring for a flush/clean connection. ***Video Instructions Coming Soon***

categories:GunsSporting Goods

16309 impressions

565 views

Prices A- Double Tap Trigger Over Travel Limiter - $20 B - Aperture Ghost Ring Sights Set - $20 C/D - Extended Magazine Release (Right and Left Handed) - $25 **$5 off each additional part for any order combo (2 or more) **Ex. A+B=$35-($5 discount)=$30 Total **A+B+C=$20+$20+$25=$65-2*($5 discount)=$55 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) Double Tap Trigger Over Travel Limiter - $20 Replaces the Factory Trigger Spring Plunger Reduce the Over Travel by 85% for Quick and easy "Double Taps" Machined Stainless Steel Aperture Ghost Ring Sights Set - $20 Replaces the Factory Open Sights Comes in a Set of Two (Large/Small Apertures) 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm) 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) Material: Precision Machined Stainless Steel Finish: Matte Black Oxide (Blued) Weight: 0.02oz (0.4g) **Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached** *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* Extended Magazine Release (Right and Left Handed) - $25 Replaces the Factory Magazine Release No Snag Design (Tab only on one side) Ergonomic Quick Index Finger Mag Release Compatible with the Charger Pistol Material: Precision Machined Aluminum Finish: Matte Black Anodize Weight: 0.56oz (16g) **Not compatible with older Metal Trigger Groups** **Mag Release does not fit certain aftermarket Archangel Stocks**

categories:GunsSporting Goods

52742 impressions

2289 views

Top,rugger American 6.5creedmore .new condition.older scope 800$ Middle,browning 7mm rem mag a bolt 1300$. .sold Bottom Remington 700 in7 mm rem mag ,very good condition with scope rail and open sites 1200$

categories:GunsSporting Goods

16419 impressions

2129 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11648 impressions

520 views

1) Sako - Tikka Rear Sight - (0.56" / 9/16" C-C) - $195.00 2) Sako - Tikka - Blade Rear Sight - 1 screw - $225.00 3) Sako - Tikka - Front Sight w/ Sight Insert & Screws (1.2" / 30mm C-C) - $275.00 4) Sako Front Sight Ramp (2 screws) - without Sight Insert (0.75" C-C) - $75.00 5) Sako 85 Front Sight Hood - $85.00 6) Sako / Browning Front Sight Hood - $85.00 7) Sako AIII - Finwolf Front Sight Hood - $85.00 10) 6-48 Filler Screws (4) - Blue - $20.00 11) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 12) 6-48 Filler Screws (4) - Stainless - $20.00 13) 8-40 Pan Head Filler Screws (2) - $20.00 14) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

84695 impressions

3454 views

Brand new TAPCO SKS Magazine Detachable 5/20rd FDE 6 pcs available Pickup GTA Ship on buyer

categories:GunsSporting Goods

1484 impressions

124 views

- Mossberg 44US (b) target rifle. - This is the commercial version of the Military trainer used in the US. Most adds call the 44US Military trainers,only the one's that are marked  "US PROPERETY " and a sereral number's on the action and barrels are true trainers. - The stock is in good condition and has been refinished. - The plastic trigger guard is intact with no cracks - Rifle comes with one 7 round magazine.  - 26" blued tapered round barrel fitted with a Lyman 17a aperture front sight and a Mossberg adjustable rear peep sight. - It is a large, heavy , accurate gun with target sights and sling -$550.00

categories:GunsSporting Goods

3204 impressions

169 views

100 count M13 links (7.62X51 NATO) These disintegrating links make great mancave ammo belts. 100 links will get you nearly a 5 feet belt. (LINKS ONLY) Local pick up only. Text or call only.

categories:GunsSporting Goods

30694 impressions

912 views