Everything is basically new and works perfectly. About 40 rounds through the gun and extremely accurate. Includes everything in photos Precision armament hypertap muzzle brake MDT carbon bipod MDT rings Vortex strike eagle 5-25x56 moa Accushot monopod Pelicans vault v800 Photo of 100 yard group

categories:Sporting GoodsGuns

16256 impressions

1882 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2743 impressions

407 views

Brand new SureFire SFMB muzzle brake suppressor adapters greatly reduce both recoil impulse and muzzle rise so that your weapon tracks straight back, keeping you on target for faster shot-to-shot recovery. The proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated for extreme durability, they are available for a variety of weapon calibers and muzzle thread specs, and every SFMB serves as a rock-solid mounting adapter for SureFire’s combat-proven SOCOM Series Fast-Attach® suppressors. The SFMB design incorporates multiple bearing surfaces to ensure superior suppressor alignment. Blind pilot holes at the 3 o’ clock and 9 o’clock positions enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. Blind pilot holes at the 6 o’clock position enable indexing the adapter at bottom dead center. All that’s required is a basic hand drill and appropriate drill bits. Offset porting delivers greatly reduced recoil impulse and muzzle rise, so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery Multiple bearing surfaces for superior suppressor alignment Precision machined from U.S. mill-certified heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Inspected for all critical dimensions including concentricity and alignment Pilot holes for tuning of muzzle brake and to pin-and-weld to rifle barrel as needed DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system Model Number: SFMB-762-M18x1.5 Caliber: .308(7.62) Thread Pitch: M18X1.5

categories:Sporting GoodsGuns

8414 impressions

574 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2775 impressions

492 views

Brand new The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2. Made from precision cast black Melonite™ finished steel and compatible with both mil-spec and commercial-spec carbine receiver extensions. Features: Accepts any push-button QD sling swivel as well as the Magpul QDM Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Works with both mil-spec and commercial-spec carbine receiver extensions (buffer tubes) NOTE: The ASAP QD is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, and MOE® Rifle Stocks.

categories:Sporting GoodsGuns

5381 impressions

438 views

Brand new The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in USA

categories:Sporting GoodsGuns

2275 impressions

393 views

Brand new New SureFire Turbo Series handgun WeaponLight generates a tightly focused, 66,000-candela beam pattern Highly visible, integrated 5-milliwatt laser—available in red or green—helps you get on target quickly and accurately without requiring the use of your gun's iron sights Mounts securely to Universal rail-equipped or Picatinny rail-equipped handguns or long guns The Turbo Series version of our X400 handgun WeaponLight delivers a stunning 66,000 candela of intense, tightly focused, far-reaching white light with a hot spot that is tremendously effective, plus a highly visible laser—available in red or green—to help the user get on target quickly and accurately. You can count on the X400T-A to help you positively identify threats at extreme distances while also providing ample spill light to help you maintain situational awareness, and you can trust its laser to provide crucial visual guidance without acquiring your sights if you’re forced to respond from a non-standard shooting position. Ambidextrous switching provides one-finger control of momentary-on or constant-on activation. Its rugged, aerospace aluminum body is Mil-Spec hard anodized for scratch and corrosion resistance and seal Precision-engineered Turbo reflector delivers 66,000 candela of tightly-focused white light; the farthest-reaching beam of any SureFire X-Series handgun WeaponLight Choose the <5 mW / 635-nanometer red laser or <5 mW / 515-nanometer green laser. Both are visible to the human eye for rapid target acquisition from nonstandard shooting positions Integral ambidextrous momentary- and constant-on switching provides easy activation Attaches securely to both Universal and Picatinny accessory rails Weatherproof O-ring and gasket sealing ensure durability in rainy conditions High-strength aerospace aluminum body is Mil-Spec hard anodized for extreme durability Accepts optional pressure-activated DG and XT remote switches for precision control without altering grip on weaponke it weatherproof. The X400T-A delivers a standard of excellence you can trust with your life.

categories:Guns

3982 impressions

403 views

Looking to expand my gun collection. Open to lots of different options, precision 22lr, CZ etc. any semi auto 762 or 556 rifle. Antique handguns, large calibre 300win mag, prc etc I buy, sell and install car audio systems as a hobby and have a great used system I would trade for a gun It consists of a Kenwood KDC-X303 Bluetooth deck. (Retail is over $200) DC audio Level 3 15” sub in box (sub doesn’t look pretty but works good and have whole new recone kit I could install or give with if you want it to be brand new. New is well over $450CAD just for the sub. And a clarion 850rms amp. Could also throw in a full brand new Amp wiring kit. Used value on this system is probably around $600+ pretty easily. If you’re interested but have something worth more I could add install or add cash to make up the difference Thanks

categories:Sporting GoodsGuns

12114 impressions

570 views

Brand new All steel construction Steel, rectangular sight post selectable between Match and Standard widths   —.040” Match width for increased precision   —.060” Standard width for maximum visibility Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks Elevation adjustment knob – no tools required Positive detents in both the up and down positions as well as on the elevation knob Standard AR height over bore when deployed, 45 deg. offset right-hand side NOTE:  All MBUS Pro Front Sights now come factory-equipped with the Enhanced Front Sight Post. There is no need to order one separately unless you are retrofitting an older MBUS Pro front sight. Enhanced Front Site Posts are not compatible with standard MBUS polymer sights. Only compatible with MBUS Pro OFFSET Rear sight MAG526.

categories:Guns

2777 impressions

410 views

Please text anytime 6476871484. Brand new. Made in USA high quality adapter. about 4 inches long. 12GA to 410GA Shotgun Adapter This will allow 12GA shotgun to shoot .410ga ammo. Designed for break-open style guns Precision machined made in USA This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a .410ga ammunition. This adapter is precision machined to the OD specifications of a 2 3/4 12GA shell plus and extra one and a half inch in front to make this adapter 4 inches long in total. It will easily fit into your break open shotgun barrel and accept any 410ga ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This is a smooth bore adapter. The cartridge side is precision CNC machined to the exact chamber dimensions (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 410ga ammunition. Surprisingly accurate!

categories:Sporting GoodsGuns

12369 impressions

1269 views

Savage Lakefield B22 FVSS-SR 22lr Bolt Action Rifle Synthetic Stainless Threaded Heavy Barrel 70232 619.99$ reduced to clear 449.99$ Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Overview Meet a bolt-action rimfire built for the modern age—and for the shooter’s body. The B22 FVSS-SR uses an ergonomically designed stock, higher comb, top tang safety and target style, vertical pistol grip to allow shooters to hold the rifle in a more natural position that puts less pressure on the wrist. Its a heavy, button-rifled barrel is suppressor ready and fed by a 10-round rotary magazine. The adjustable AccuTrigger™ gets the most accuracy from the precision platform. FEATURES Bolt-action 22 LR User-adjustable AccuTrigger 10-round rotary magazine Button-rifled, suppressor-ready heavy barrel Modern, ergonomic composite stock Top tang safety Drilled and tapped for scope mounts Specifications Action : Bolt Barrel Length : 21″ Barrel Material : Stainless Steel Caliber : 22 LR Magazine Capacity : 10 Hand : Right Length of Pull :13.5″ Magazine : Rotary Overall Length (in) : 39″ Rate of Twist (in) : 1 in 16 Type : Rimfire Stock Color : Black Stock Material : Synthetic Stock Type : Sporter

categories:Guns

13171 impressions

832 views

Brand new Trijicon/RMR footprint collimator mount that works with Reptilia AUS and Geissele Super Precision scope mounts. It allows the use of a collimator for short-distance shooting without sacrificing the scope. The mount is designed to keep the collimator as close as possible to the scope without limiting visibility. Being made of anodized 7075 T6 aluminum ensures high durability and shock resistance. Features: ROF-45 mount for Trijicon RMR footprint collimator. Made of 7075-T6 aluminum Works with Reptilia AUS and Geissele Super Precision mounts Low weight

categories:Guns

2569 impressions

281 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

4193 impressions

485 views

Please text anytime 6476871484. Brand new adapters for 12gauge guns. $110 each. Here is the list of adapters currently in stock. 410GA to 22LR smooth bore Adapter 12GA to 357 Magnum & 38 Special - RIFLED Shotgun Adapter 12GA to 44 MAGNUM RIFLED Shotgun Adapter 12GA to 9MM RIFLED Shotgun Adapter 12GA to 45ACP RIFLED Shotgun Adapter 12GA to 22LR rifled or smooth bore Adapter 12GA to 22WMR Magnum rifled/smooth bore Adapter 12GA to 410GA Adapter 12GA to 40S&W rifled 12GA to 45LC rifled 12GA to 10mm rifled 12GA to .380ACP rifled Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long adapter This adapters give your 12 Gauge single or double shot break open shotgun the ability to fire subcaliber ammunition. They will easily fit into your break open shotgun barrel. The cartridge side is precision CNC machined to the exact chamber dimensions (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Carry one gun and have the ability to shoot not only 12GA shells but also 357 Magnum or 38 Special ammunition. Surprisingly accurate!

categories:Sporting GoodsGuns

79926 impressions

6735 views

Please text anytime 6476871484. Brand new 12GA to 9MM RIFLED Shotgun Adapter - Chamber Reducer - Stainless 12GA to 9MM Luger - RIFLED Shotgun Adapter Designed for break-open style shotguns Precision machined from stainless steel This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 9MM bullet (standard 9mm Luger - 9x19). This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 9mm Luger ammunition. After firing simply remove the adapter and tip upside down to remove the spent 9mm shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The 9mm bullet side is precision CNC machined to the exact chamber dimensions to accept 9mm ammunition (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Made in the USA on American machines Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 9mm ammunition. Surprisingly accurate!

categories:Sporting GoodsGuns

44850 impressions

3886 views

Please text anytime 6476871484. Brand new. 12GA to 45LC - RIFLED Shotgun Adapter Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 45LC ammunition. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 45LC ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The cartridge side is precision CNC machined to the exact chamber dimensions to accept 45LC ammunition (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 45LC ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style guns only. The risk is that the cartridge could fall out of the adapter causing a dangerous situation. Also, it could damage the adapter upon ejection.

categories:Sporting GoodsGuns

18752 impressions

1333 views

Please text anytime 6476871484. Brand new 12GA to 22 MAGNUM Shotgun Adapter Designed for break-open shotguns Precision machined from stainless steel made in the USA This adapter has a SMOOTH BORE This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22Magnum bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22 Magnum ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A smooth bore is gently reamed through the adapter for the bullet (no rifling). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Carry one gun and have the ability to shoot not only 12GA shells but also 22 Magnum bullets Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open style shotguns. This chamber / caliber reducer will NOT work with 22LR/22 long/22 short ammunition.

categories:Sporting GoodsGuns

30827 impressions

2478 views

Please text anytime 6476871484. Brand new. 12GA to 357 Magnum & 38 Special - RIFLED Shotgun Adapter Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 40S&W ammunition. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 357 Magnum or 38 Special ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The cartridge side is precision CNC machined to the exact chamber dimensions (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 40S&W ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style guns only. The risk is that the cartridge could fall out of the adapter causing a dangerous situation. Also, it could damage the adapter upon ejection.

categories:Sporting GoodsGuns

22515 impressions

1474 views

Please text anytime 6476871484. Brand new $100-110 12GA to 22 LR or 22 Short Adapter - SMOOTH BORE OR RIFLED!!! Precision machined from stainless steel Made in USA. This adapter has a SMOOTH Bore (rifled) This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22lr bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22LR or 22 Short ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A SMOOTH bore is reamed through the adapter for the bullet. Adapter orientation is not important and the adapter will work in any position. Will fit any break open gun with 2 3/4" or 3" chambers. Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 22LR / 22 Short bullets. Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open shotguns. This chamber / caliber reducer will not work with 22 magnum ammunition. Any ammunition pictured is for representation purposes and is not included with this purchase.

categories:Sporting GoodsGuns

41001 impressions

3206 views

Please text anytime 6476871484. Brand new. 12GA to 357 Magnum & 38 Special - RIFLED Shotgun Adapter Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 357 Magnum or 38 Special ammunition. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 357 Magnum or 38 Special ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The cartridge side is precision CNC machined to the exact chamber dimensions to accept 357 Magnum or 38 Special ammunition (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 357 Magnum or 38 Special ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style guns only. The risk is that the cartridge could fall out of the adapter causing a dangerous situation. Also, it could damage the adapter upon ejection.

categories:Sporting GoodsGuns

31010 impressions

2478 views

Brand new Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~3" recommended) All mounting hardware included The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. Made in USA

categories:Guns

4102 impressions

673 views