The factory-original CZ600 5-round magazine for .300 Win Mag, .30-06 Springfield, 8.57mm IS, or .270 Win ammunition. 65$ per mag or 3 for 180$ + shipping

categories:GunsSporting Goods

24388 impressions

536 views

I am selling my 10/22 build, it works flawlessly, less than 500 rounds through, it doesn’t get used often so no point in having it, not looking for trades and I can ship any questions text me 403 928 0419 1. SBI C-71 receiver 2. DLASK 10/22 machined bolt 3. DLASK extended charging handle and action spring 4. DLASK automatic bolt release 5. DLASK extended mag release 6. Ruger 10/22 BX trigger 7. DLASK Stainless Steel, carbon fibre wrapped barrel 16.5” 8. Magpul x22 stock ( comes with spacers to change length of pull) 9. Vortex crossfire red dot 10. Ruger 10 round mag included

categories:GunsSporting Goods

13915 impressions

816 views

Marlin 795. Extensive upgrades. Mcabro spring kit, Boyd’s spike camp stock, metal floor plate, 10 round factory mag and 3 extended mags. 4x scope, very accurate $500.00 obo

categories:GunsSporting Goods

4119 impressions

393 views

Selling/trading a Brno Model 1 bolt action .22. Overall it's in good shape but is missing some parts. Made in 1949. Bluing is in good shape, has normal fading throughout, nothing major. Stock looks to have seen a light sanding and could use a refinishing, it's in nice shape overall. Bore is in nice shape. Comes topped with its original iron sights. From what I can tell it's missing the following parts: butt plate, bottom metal, action screws, sling studs, cocking mechanism, springs, part of the safety. Beyond that I'm not exactly sure as to what it will need to be functional again. Comes with one detachable magazine. Came in as seen. As a result it will be sold as is with no warranty or guarantees. Looking for $350 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

2570 impressions

236 views

Benelli nova speed 26 inches In original box whit all the gears , 2 extendeds chokes, 3 flush chokes, speed choke wrench..ect. + Innovatac spring and cap kit for convert the magazine to standard size. Like new, just fired 2 box of birdshots.

categories:GunsSporting Goods

1327 impressions

214 views

I’m looking for Sks parts Gas tube handguard Magazines Factor or after market SKS pistons Spike bayonet kit After market replacement gas piston spring Mainspring Dust cover And any other parts

categories:GunsSporting Goods

8746 impressions

213 views

Winchester Model 1894 Lever Action 38-55. Date 1909 The stock was varnished at some point. The wood on forearm and butt stock is very good with just some minor bangs from use. Original curved steel recoil butt plate is in place. The bluing on barrel, magazine and lever is approximately 75% and the receiver is < 10%. The metal is good but has some minor scratches, etc. and evidence of minor surface rusting. The non-load side of the received looks like course steel wool was used on it. Buck horn sights are in excellent condition and period correct. The barrel is 26” with a full magazine, and the muzzle looks good. Bore is polished & shiny and shows very minor past corrosion, probably from black powder use. Rifling is in good condition. Screws have been used but are in very good condition. All lettering and the serial number are crisp and clear. Operationally everything checks out. The trigger is good. The firing pin extends out when pushed, The cartridge lifter works well and the ejector is tight. Spring on loading port is tight. Half cock safety works and hold when bumped, when at full cock or fire ready the hammer does not fall when bumped. Overall, this firearm is graded as good. A good addition to any collection. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:GunsSporting Goods

9520 impressions

815 views

Winchester Model 1886 Sporting Rifle in 33W.C.F. Ref #1033 Winchester Model 1886 Sporting Rifle in 33W.C.F. with 24" round barrel, lever action dated 1910. Factory wood is very good at 98%, stock appears to have been varnished. Bluing is near zero on receiver, barrel and magazine app. 75%. Screws all look excellent. Original sights fully intact. Bore has rifling top to bottom with typical black powder corrosion. No repairs, alterations or additions. Operationally everything appears to be good. Cycles well, strong hammer spring and safety works. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used, and are usually acquired through estate liquidations. I visually inspect them and check basic operation only, and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find, but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competant gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammuntion. Thanks, Darcy Darcy's Sporting Estate Liquidations

categories:GunsSporting Goods

9917 impressions

950 views

78 rounds of cleaned and deprived 51 rounds of deprimed only Also 19 rounds of 223 deprimed . Can deliver as far as Medicine Hat in the spring.

categories:GunsSporting Goods

10450 impressions

447 views

The TMAG 30/5 AR/M4 GEN M3 is a highly reliable, translucent, 30-round magazine for STANAG-compatible weapons chambered in 5.56×45 NATO/.223 Remington. Molded from a durable translucent material with an olive drab hue, it provides shooters the ability to visibly verify various ammunition types and the current round count. Featuring ribbed front and rear straps for improved purchase during magazine changes, the sides are left smooth to enhance visibility. Like the rest of the GEN M3 family of magazines, the TMAG incorporates similar internal geometry which translates into unmatched reliability when firing. The four-way, anti-tilt follower is paired with a durable USGI-spec, stainless-steel spring with a painted coil, which maintains the “gas gauge” capability from the “Window” magazine product line. The magazine body is clearly marked to show approximate round counts when inserted in a magazine well, and the paint-pen dot matrix allows for custom markings to be applied by the shooter. The TMAG’s low-profile floor plate also allows for compatibility with the full line of PMAG® AR/M4 GEN M3 floor-plate accessories. The TMAG is optimized for Colt-spec AR15/M4 platforms, but modified internal and external geometry also permits operation with a range of other weapons such as the WK180C, HK® 416/MR556A1/M27 IAR, FN® SCAR™ MK 16/16S, and others. Made in the USA. Available for shipping only. Taxes will be added.

categories:GunsSporting Goods

17661 impressions

498 views

Winchester Model 1894 Lever Action 32-40 Ref #1043 This firearm comes with a Winchester letter indicating it was originally an Octagon barrel, it has however been rebarreled to a round barrel which is marked Model 94. The action is a Model 1894. The butt stock is near perfect, the forend has two hairline cracks that had been professionally repaired at one time, probably when rebarreled. The finish is period correct. Original curved steel recoil butt plate is in place. The bluing on barrel, magazine and lever is approximately 75% and the receiver is 20%. Barrel is 26” with a 2/3 magazine, and the muzzle looks excellent. The metal is excellent with no dings, scratches, etc. There is no rust or corrosion evident. A few rub marks on the right side of action. Sights are in excellent condition and period correct. Bore is clean and does not appear to have seen black powder, there is no corrosion, it’s nice and shiney, with rifling in good condition. Screws have been used but are in very good condition. All lettering and the serial number are crisp and clear. Operationally everything checks out. The trigger is good. The firing pin extends out when pushed, The cartridge lifter works well and the ejector is tight. Spring on loading port is tight. Half cock safety works and hold when bumped, when at full cock or fire ready the hammer does not fall when bumped. Overall, this firearm is graded as a shooter due to being rebarreled, but it is in good condition and a good addition to any collection. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:GunsSporting Goods

18616 impressions

1545 views

672 PRIMERS - NO # CCI 157 shot shell primers-6 full boxs, + 1 box of 72 - + 1 empty box Old remington Size- 173 PRIMERS - NO # CCI 109 SHOTSHELL PRIMERS Replaced by CCI 209 White box, green "CCI" panels, end label reads "No. 157 Remington Size." Diameter is 0.229" Inline - Black powder muzzle loaders..... if you shoot a muzzle loader that takes 209 primers, they will also work with the 57's or 157's. These are collector items. They fit the smaller primer hole that early Remington hulls had. They may fall out of a standard 209 size primer hole. They are the same as the *57 primers made by Remington and Alcan (and I believe Winchester) If you have in-line muzzleloaders, they may be able to use them too-...... ??? NOTE only on the in-lines- some that use a retention spring to hold it in such as those by Traditions and CVA- I am in Calgary, being PRIMERS can not ship.... travel south almost to Nanton every couple days, will meet around Calgary area,.... would consider trade for CCI Magnum / large / small Primers.

categories:GunsSporting Goods

7956 impressions

417 views

Priced to sell! Moving overseas and need to get rid of it (and spent too much over the holidays lol)! Bought just over a month ago, ZERO ROUNDS THROUGH! MAKE AN OFFER!! This is a beautiful piece with flip up ghost sites, fully adjustable cheek rest and spring assisted pump. Comes with one 10 round mag! I will even throw in another 5 round mag if you can pick up before 5pm today!! Don't miss out on adding this beautiful tactical shotgun to your collection for almost half the price you'd usually pay! NOTE: I have another EGE ARMS BULLPUP 12 GAUGE WITH 3 CHOKES AND 2 5 ROUND MAGS that also has zero rounds through it that must go too. Worth over $650 only asking $400. Make an offer on both!!¡¡!!

categories:GunsSporting Goods

10383 impressions

1277 views

RARE OPPORTUNITY Firearm magazine manufacturing business for sale. No property or lease included in the sale. Business registration is in British Columbia. GST/PST number included. Taxes and fees up to date Professionally engineered 3D CAD files rendered by an aerospace and defence specialist. Included 3D printing files and retail prototypes Materials to make approximately 500 magazines. (Including 500 proprietary magazine spring's) (retail rack bags) (filament) Shopify website included. 4 mom & pop retailers with verbal agreements to sell the product. We have created an ambidextrous Type 81 - Ak platform rifle magazine. No modifications or cutting required. Factory style type 81 / AK polymer magazines Designed to only hold 5 rounds with no pins or rivets. (Disclosure business cannot make pinned or riveted magazines as producing a prohibited device is illegal) ( It is still legal with this business to sell imported pinned magazines however) 5 round rifle or 10 round pistol magazines are all that is legal to produce. Further legal instructions from the RCMP included with the sale. A valid PAL is required to purchase this business.

categories:GunsSporting Goods

7008 impressions

438 views

Looking for a pistol grip, charging handle (full assy with the stud, spring, bearing and cover) and mag for my rifle. Please text me at 780 804 4539 as I don't frequently check on here. Parts would have to be shipped to Fort McMurray, Alberta. Thanks

categories:GunsSporting Goods

4048 impressions

311 views

https://hamlynarmamentcompany.ca/products/type-81-pmag-battlepack-with-free-charging-handle Type 81 PMAG battlepack comes with 5x Type 81 PMAGs and 1 free Type 81 extended charging handle. This PMAG is a lightweight and highly reliable 5/30-round polymer magazine modified for the Type 81 pattern rifles in 7.62x39mm Features: Impact and crush resistant all polymer body Constant-curve internal geometry for smooth feeding Anti-tilt, self-lubricating follower for increased reliability Long life stainless steel spring Ribbed gripping surface and aggressive front and rear texture for positive magazine handling Paint pen dot matrix panels on the bottom of the body to allow for identification marking Flared floorplate aids magazine handling and disassembly yet is slim enough for use with most pouches

categories:GunsSporting Goods

8976 impressions

796 views

Hello, I am selling my Mac 49/56 chambered in 7.5 french. The rifle is in perfect condition. As you can see in the photos there is no pitting, or scratches anywhere on the rifle. There is no pitting or rust anywhere on the rifle. The rifle has no cracks, nor chips, on the rifle furniture. The rifle is in perfect functional condition. The recoil spring in strong. The firing pin is in tact, and near perfect. As seen in the photos the bore is minor and shiny. No pitting, nor frosting in the bore. The rifling is strong. I would rate the rifle as 95% in terms of finish. The rifle comes with a sling and recoil pads. As well as two extra magazines. Buyer pays for shipping.

categories:GunsSporting Goods

8088 impressions

944 views

WTS $300 G&G CM16 Predator Box, manuals 1 g&g mag and 1 hicap mag Not sure if its deans or mini tamiya Condition is 10/10 $300 DE UTR45 Polymer version Sight Riser Wired to deans 3 mags, one of the mags has a weak spring Condition is 8/10 Northside Edmonton Will deliver or meet at TAZ on saturdays

categories:GunsSporting Goods

3252 impressions

549 views

Long story short, I’m very impulsive and went all in for the sport, only to use it all once. No longer have the time for the hobby so I’m just trying to recoup some of the money spent. All together retails for $1100 + tax, will consider reasonable offers but not in a rush to sell. Also have some “extras” for sale separately. Pick up in Fort Saskatchewan. Take it all for 800 obo G3 Combat pants (34) & Shirt (L) Dye I5 mask with carry bag and extra lens Yakeda Tactical Vest Tactical Gloves (XL) Double Eagle Metal M4 w quick change spring, 3 mid cap mags, 2 batteries, speed loader, foregrip.

categories:GunsSporting Goods

4625 impressions

551 views

Nice gun blueing in good shape barrel excellent number matching .comes with one mag and sling

categories:GunsSporting Goods

5142 impressions

719 views

Up for sale, wk180c gen 1 Comes with one 5 rd mag Brand new piston and spring, brand new brash bushing. Aftermarket trigger (I think it’s a trigger tech, can’t remember) Has some minor signs of use, nothing a quick paint job won’t hide. Would paint it myself but want to remain transparent so will sell it with the love marks. Only selling because I have a bren 2 now Asking $945 Can discuss shipping, pickup in Guelph area Message for more pictures

categories:GunsSporting Goods

7233 impressions

846 views