1) Win 97B Front Sight Insert, Ramp, Retainer, & Hood - $165.00 2) Win 97B Front Sight Hood - $60.00 9) 6-48 Filler Screws (4) - Blue - $20.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

7209 impressions

221 views

1) Winchester 32B Rear Sight w/ elevator (95%) - $125.00 9) 6-48 Filler Screws (4) - Blue - $20.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

6936 impressions

214 views

1) Winchester 40A Rear Sight - (M1903) - U Notch - (80%) - $90.00 2) Winchester 40A Rear Sight - (M1903) - U Notch - (95%) - $120.00 9) 6-48 Filler Screws (4) - Blue - $20.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

7941 impressions

220 views

1) Win 9422 - Rear Sight w/ 3C Elevator - $170.00 2) Win 9422 - Front Sight Insert - $85.00 3) Win 9422 - Front Sight Hood - $40.00 4) Win 9422 - 3C Elevator - $50.00 9) 6-48 Filler Screws (4) - Blue - $20.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

9227 impressions

196 views

Redfield - 1 pc Base - Winchester Model 70 Leupold Rings - Med - Matte $75.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

43893 impressions

823 views

Leupold - 2 pc Bases (1 extended) - M70 - Gloss Leupold Rings - Med - Matte $75.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

38345 impressions

758 views

Browning Model 92 Lever Action (1991) - 44 Rem Magnum - 20" Barrel, Full Mag, Gold Plated Saddle Ring, Original Sights Engraved Receiver - LHS Has "1878-1978 Browning Centenial" Excellent Original Condition $1,750.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

55283 impressions

2188 views

Winchester Model 1894 & pre 64 Model 94 - Loading Gate & Screw $185.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

27650 impressions

694 views

1) Winchester pre 64 M94 - Carbine Blade Gold Beaded Insert - $95.00 2) Winchester pre 64 Model 94 - Front Sight Hood - $40.00 3) Winchester pre 64 Model 94 - Front Sight Beaded Insert - $75.00 4) Winchester pre 64 Model 94 - 22B Rear Sight - $350.00 6) Older Original 1A - 1B - 1C Elevators - $60.00 7) Winchester pre 64 Model 94 - 22G Rear Sight - $250.00 8) Winchester Model 94 - Rear Sight 3C - 6 Step Elevator - $50.00 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 12) Winchester 1873 - 1892 Saddle Ring Staple (only) - $65.00 Screws 14) 6-48 Filler Screws (4) - Blue   $20.00 15) Win 1890-06-62 Tang Screw  - 40.00 16) Win 1894-1892-1873 PG Tang Screw - 60.00 17) Win 1876-1886 Tang Screw  -  40.00 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 21) Win 1894 (pre 64) Magazine Plug Screw Long -   35.00 22) Win 1894 (pre 64) Finger lever pin stop screw - 40.00 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 24) Win 1894 (pre 64) Loading gate screw - 40.00 26) Win 1892 -1894 Forend Cap Screw (2) -  45.00 27) Win 1892 -1894 SRC Front Band Screw  - 40.00 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 29) Win 1885 Low Wall Tang Screw - 40.00 30) Win 1885 High Wall Tang Screw - 40.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

119635 impressions

7579 views

Remington Model 580 Single Shot Smooth Bore (1967) - 22 Rimfire Shot Shell, 24" Barrel, Bolt Action, Original Bead Sight. Model 580 Single Shot Rifles had a total production of 60,0000 Rifles (1967 - 1977) - Only 3000 were made as Smooth Bore. $950.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

9879 impressions

325 views

Winchester Models 1873 - 1892 - 1894 - Carbine Ladder Sight Good Working Condition - Nice Original Blue on Base - Not Filed or Damaged $375.00 ---- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

46233 impressions

820 views

1) Winchester M88 + M100 Folding Rear Sight   -  $100.00 2) Winchester M88 + M100  - Front Sight Insert  -  $75.00 3) Winchester M88 + M100  - Front Sight Hood  -  $40.00 4) Winchester M88 Original Sling Swivels  -  SOLD 5) Winchester Post 64 M88 Plastic Butt Plate - 5 x 1 5/8 - 3 3/8 C-C  -  $75.00 7) Winchester Pistol Grip Cap "W" Insert Only -  0.735" x 1.16"  - $65 8) Winchester Pistol Grip Cap Scroll Insert Only -   $30 9) 6-48 Filler Screws (4) - Blue   $20 10) 3/8" DT Filler - Curved Top - $45 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

77143 impressions

4446 views

1) Win post 64 M70 Rear Sight w/ 2 screws - $135.00 2) Win post 64 M70 Front Sight w/ Insert, Hood & Screws - $175.00 3) Win post 64 Model Front Sight Hood - Short (only) - $75.00 4) Win post 64 Model Front Sight Hood - Long (only) - $75.00 5) Win post 64 Pistol Grip Cap with Red "W" Insert - 0.735" x 1.16" - $100.00 6) Win post 64 Pistol Grip Cap "W" Insert Only - 0.735" x 1.16" - $75.00 7) Winchester Pistol Grip Cap Scroll Insert Only - $30.00 --- 21) Win pre 64 M70 - 22G Rear Sight w/o Elevator - $275 22) Win 3C - 6 Step Elevator - $50 23) Win pre 64 M70 Folding Rear Sight - .47" H - $100 24) Win pre 64 M70 - Front Sight Insert - $75 25) Win pre 64 M70 - Front Sight Hood - $40 26) Winchester Marksman - Target Stock - Sling Swivels - $150.00 27) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (without Pins) - $155 28) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (with Pins) - $175 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

48725 impressions

919 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 New Model No. 3 Top Break, .44 Special / Russian Revolver. This one is in very good condition with longer 1 9/16 cylinder and can shoot both .44 Special and 44 Russian ammo. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6.5-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 10438, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

2171 impressions

499 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

8287 impressions

282 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

13908 impressions

566 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

8260 impressions

300 views

01.Browning BAR MKII 300 Win.mag 3 round mag.-$100.00 02.Browning BAR Belgium 300 Win.mag 3 round mag.-$80.00 03.Benelli R1 .300 WSM original mag.-$100.00 04.Tikka T3x CTR/TAC A1/Arctic 5rd Mag 308/260Rem/6.5CM-$180.00 05.Voere 243 win 3 rounds mag.-SOLD 06.XCR-M .308 win. 5-Round Pistol Mags-$40.00 07.AR15 5 Round 20 GA. Magazine-$40.00 08.Winchester 88 Caliber 243 WIN or 308 WIN 4 Round Magazine-$240.00 09.VZ58 7.62x39 5 round short magazine-$40.00 10.X-Bolt Long Magnum Magazine 388 Win Mag, 300 Win Mag, 7mm Rem Mag.-$75.00 11.Ranger XT3 .410 Bore 5 Round Magazine-$65.00 12.Savage 220 2 rounds mag.-$40.00 13.Browning BLR 7 MM.Rem.Mag.5rd mag.-SOLD 14.Sauer 303 Factory Original .300 Win Mag 5 Round Magazine -$300.00 15.Sauer 200/202 Factory Original .30-06 5 Round Magazine -$300.00 16.Heym SR30 27/30-06 Factory Original 3 Round Magazine -$300.00 17.Colt/Sauer 90 FN Factory Original .300 Win Mag 3 Round Magazine -$300.00 18.VZ58 4 magazine leather pouch –$40.00 19.Benelli Lupo 4rd Magazine Magnum Action .300 Win Mag-$80.00 20.Browning A-BOLT-3 300 Win.Mag. Black 3 RD-$120.00 21.PMAG Magpul 308/7.62 NATO 5 rounds mag.-$40.00 22.Browning BAR MKII 270/30-06 Win. 4 round mag.-SOLD 01.Mossberg 715 22LR 10 rounds mag-SOLD 02.Savage/Stevens/Lakefield 93/305/310/502/503 22WMR 5rounds mag-$40.00 each 2pcs. 03.Zastava CZ99/MP22/Rem model 5- 5 rounds .22WMR mag.-$45.00 each 7 pcs. 04.Zastava CZ99/MP22/Rem model 5- 5 rounds .22LR mag.-SOLD 05.Savage A17 17 Hornady Magnum Rimfire (HMR), 25 Rounds,Butler Creek Magazine, Polymer Black-$45.00 each-3 pcs 06.Voere .22LR 7 rounds mag.-SOLD 07.Ruger 10/22 Rotary Magazine - .22LR, 10-Round-SOLD 08.Marlin .22WMR 10 rounds mag.S/S.-SOLD 09.CZ 457, CZ 512, CZ 455 steel magazine .22 LR | 10 round-$60.00 All are used except when specified as "New". They all work in the correct gun model. Some may need fitting. All prices NOT INCLUDED SHIPPING cost! Shipping extra! Please send message to: medal1958@gmail.com

categories:GunsSporting Goods

251148 impressions

12927 views

Marlin Model 375 S (1984) - 375 Win - 20" Barrel, Original Sights, Factory Sling Studs, Factory Recoil Pad Bore is Clean & Shiny, Barrel & Receiver - 99% Original Blue, Excellent original Wood Finish $1,785.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

40817 impressions

1484 views

1) Winchester Pre 64 Model 94 - Rear Barrel Band & Screw - Case Hardened 2) Winchester Pre 64 Model 94 - Front Barrel Band & Screw - Case Hardened Sold as a set - $320.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

31236 impressions

1195 views

2) Ithaca High Standard Elevator - .850" W x 1.00" L - $30 3) Elevator X - .104" W x 0.89" L - OAL = 1.65" - $35 4) Cooey Elevator - .075" x 1.21" - $15 5) Husqvarna Elevator - $45 6) Marble Double Step - Rifle Elevator - $35 7) Marble Double Step - Carbine Elevator - $35 8) Marlin Elevator M1 - Marlin S-25 Sight - .046" W x 1.60" L - $35 9) Marlin Elevator M2 - Marlin S-25 Sight - .055" W x 1.60" L - $35 10) Marlin Elevator (336 - 1894 - 1895) - .115"W x 1.43"L - SOLD 11) Marlin Early Fishhook Elevator- .075" W x 1.22" L - $35 12) Marlin Elevator - Marlin S-27 Sight - .095" W x 1.15" L - SOLD 14) Remington 98 1/2 Sight - 105 Elevator - Round Barrel Model 12 Rifles - $45 15) Remington "R" Elevator (701 1/2) - .057" W x 1.11" L - SOLD 16) Savage Folding Sight Elevator - .061" W x 1.13" L - $40 17) Savage Fishhook Elevator - $40 18) Savage 1899 Elevator - .095" W x 1.05" L - OAL = 1.27" - SOLD 19) Savage 99 Elevator - .095" W x 1.15" Lo - $40 21) Savage 24 Elevator (Replacement Style) - $25 22) Win Early Elevator - $40 23) Winchester 1A Elevator - dated (.207") - $60 24) Winchester 1B Elevator - dated (.162") - $60 25) Winchester 1C Elevator - no date (.175") - $60 28) Win 2C Elevator - .60"W x 1.625"L - $35 29) Winchester 3C - 6S Elevator - $50 - 31) 6-48 Filler Screws (4) - Blue $20.00 32) 6-48 Pan Head Filler Screws (4) - Blue $20.00 33) 6-48 Filler Screws (4) - Stainless $20.00 34) 8-40 Pan Head Filler Screws (2) $20.00 35) DT-1 - 3/8" DT Filler - Blue - Curved Top - $45.00 36) DT-2 - 3/8" DT Filler - Stainless - Curved Top - $50.00 - 40) Husqvarna Front Sight Hood - $85 41) Marlin pre 72 Round Front Sight Hood - $45 42) Marlin post 72 Front Sight Hood - $60 43) Sako - Finnwolf Hood - $85 44) Browning (Japan) BLR - BAR Front Sight Hood - SOLD 45) Parker Hale Front Sight Hood - $85 46) Browning (Belgium) Safari Front Sight Hood - $85 47) Winchester Model 9422 Front Sight Hood - $40 48) Winchester post 64 Model 94 Front Sight Hood - $40 49) Winchester pre 64 Model 94 Front Sight Hood - $40 50) Winchester Model 70-88-100-64-65 Front Sight Hood - $40 51) Winchester post 64 Model 70 Front Sight Hood - $75 52) Winchester post 64 Model 70 Front Sight Hood (Long) - $85 53) Winchester (97 Sight - Model 69) Front Sight Hood - $75 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

180822 impressions

2645 views