20moa picatinny rail for Remington 700 long action no longer need it

categories:Sporting GoodsGuns

16060 impressions

441 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2958 impressions

494 views

For sale is a Marlin Model 336W lever-action rifle in .30-30 Win. It has an XS Lever Scout picatinny rail for mounting optics. It also comes with a hammer extention installed. It has a hooded front sight. There are a few minor marks on the stock from normal use. It has recently been serviced and tuned by a professional gunsmith. The action is super slick!

categories:Sporting GoodsGuns

13179 impressions

579 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2745 impressions

407 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2777 impressions

492 views

Brand new XT™ Rail Panels offer low-profile 1913 Picatinny rail coverage. The semi-rubbery material offers improved control and rail protection. Easily cut for custom lengths, sections can mount next to each other to form a visually continuous cover. Each panel fits one side of a carbine-length rail.  One panel per package.

categories:Sporting GoodsGuns

1678 impressions

366 views

**BNIB** Blackhawk thumb rest fits Picatinny rail. === $22 Pickup around GTA Ship on buyer.

categories:Sporting GoodsGuns

3528 impressions

791 views

Brand new The RSA QD provides a customized attachment point for all push-button QD slings. Made from corrosion resistant steel, it mounts on 1913 Picatinny rails and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access.

categories:Guns

2416 impressions

386 views

Brand new The RVG is a basic, light weight, cost effective vertical fore grip designed to be compatible with all 1913 Picatinny rails. Constructed from reinforced polymer with aggressive texturing for positive grip and manipulation, it is as durable as it is functional. It is ergonomically designed for use as a traditional vertical grip, but has also been optimized for use with the "Thumb Break Method" of shooting as taught by Magpul Dynamics. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards. Made in USA

categories:Guns

3696 impressions

504 views

3D printed ammo holder that attaches with M-Lok screws or to Picatinny rails. comes with screws. Currently have .22lr, 308, 30-30, 9mm, 12 gauge and 223/556 designed but open to suggestions on other calibers.  shipping available

categories:Guns

13214 impressions

1044 views

Savage 110 in 6.5 PRC with Athlon Argos BTR GEN2 6-24 X 50 FFP scope, MDT 20 MOA Picatinny rail and Vortex scope rings. Was going to build a long range rifle and plans changed.

categories:Sporting GoodsGuns

1500 impressions

74 views

SLING STUD MOUNT The Sling Stud Mount Accu-Shot®Monopods attach to traditional, angled rifle stocks by the Sling Stud found on many common rifle stocks. It comes ready to install along with the one provided 3/32” Allen wrench to aid in proper installation. All models have an additional thumbnut to lock the unit into a fixed elevation, except the BT01-QK. They provide portable stability in a lightweight, mechanical device that attaches to the buttstock of a marksman’s rifle. With both fine and gross elevation adjustment, it is used to control and maintain sight picture while decreasing muscle fatigue. The vertical height can be adjusted with the push of a button. It also folds out of the way when not in use allowing for the concurrent use of your sling with option of the sling attachment found on the Sling Stud Mount series. PRECISION RAIL MOUNT (PRM) The Precision Rail Mount (PRM) Accu-Shot® Monopods mount to any Picatinny rail found or installed on many adjustable buttstocks with a straight surface that parallels the rifles bore. It comes ready to install by a one-screw clamp with the one provided 10-32 x 1.25″ clamp bolt flat head fastener. All models have a thumbnut to lock the unit into a fixed elevation. They provide portable stability in a lightweight, mechanical device that attaches to the buttstock of a marksman’s rifle. With both fine and gross elevation adjustment, it is used to control and maintain sight picture while decreasing muscle fatigue. The vertical height can be adjusted with the push of a button and folds out of the way when Stored or shooting off hand. $120 each

categories:Sporting GoodsGuns

692 impressions

56 views

The Trijicon RMR/SRO ® Footprint Quick Release Low Mount with Trijicon Q-LOC™ Technology features a Mil-Spec drop test rated 6061-T6 aluminum design, with an easy to use one handed tool less mounting system. This Return to Zero mount boasts a low weight and low-profile design, compatible with any Picatinny rail. Designed specifically for the Trijicon RMR/SRO. This lightweight Low mount is perfect for mounting a red dot sight using the RMR footprint on any weapon platform with a Picatinny rail that requires a low optical height. Such as a shotgun, .22 rifle,  AK or pistol platform. Can be Tightened To: 30-38 in. / lbs.

categories:Sporting GoodsGuns

913 impressions

67 views

For sale is a Savage B17 precision rifle. With MDT chassis chambered in 17hmr. The gun is in very good shape overall. Normal signs of use. No cosmetic damage. Barrel is clean and smooth. FEATURES Custom 1 Piece MDT Chassis machined from billet aluminum Adjustable length of pull and comb height 18” heavy threaded barrel w/ flush cap 1 Piece Picatinny rail Light, crisp, user adjustable AccuTrigger pull from 1.5-4 lbs. 10 round detachable magazine If you have any questions or would like more pictures feel free to call, text or email! +tax(we are a business, whatever tax is in your province) +shipping ( $ 60.00 BC, $ 65.00 AB, $ 75.00 all other provinces) Local pickup is available.
 250-753-3355 (Call or Text) 
Must have your PAL to purchase.

categories:Sporting GoodsGuns

1221 impressions

67 views

For sale is a rare Dlask Arms 8.5" 'Shorty' tactical pump-action shotgun. It is 12 gauge model, with 2-3/4" & 3" chamber, and 8.5" barrel (hard to find). It is based on the Remington 870 action. It comes with a Hogue rubber over-molded stock (OD Green), with Dlask sling attachment. This model has the Dlask Tri-Rail (aluminum) pump handle with picatinny rails @ 3, 6, 9 o'clock positions (for mounting accessories) (c/w Dlask tactical hand-stop). It also comes with a Dlask picatinny rail pre-installed on the receiver (for mounting optics). In addition, it has the Dlask (orange) mag-tube follower, and Wilson Combat over-sized safety. This setup has an OAL of over 26.5", making it one of the shortest non-restricted pump-action shotguns on the market. It is in excellent plus condition, and has never been fired!

categories:Sporting GoodsGuns

1167 impressions

110 views

Brand new  Non-restricted Caliber: 5.56mm NATO (.223 REM) Action: Bolt Capacity: 5 Rounds Barrel: 16.25" Sight: Picatinny Rail, FO Rifle Sights Twist: 1:9 LOP Type: Fixed LOP: 13.25" Barrel Finish: Matte Blued Stock Finish: Black Textured Stock Weight: 6.75 lbs. Length: 36.5" Coming with one magazine Made in USA

categories:Sporting GoodsGuns

2152 impressions

120 views

Brand New Non restricted MPN:18096 Caliber: 338 Lapua Stock: Folding, Adjustable Finish: Smoked Bronze Cerakote Grip: Magpul MOE-K2-XL Trigger: Ruger Marksman Adjustable Capacity: 5 Barrel Length: 26" Thread Pattern: 3/4"-24 Weight: 15 lbs. Height: 7.30" Twist: 1:9.375" RH Overall Length: 49.25" Length of Pull: 12"" - 15.50" Folded Length: 37.60" Grooves: 5 20 MOA Picatinny rail secured with # 8-40 screws for increased long-range elevation capabilities. Patented multi-magazine interface functions interchangeably with AICS and M110/SR-25/DPMS/Magpul-style magazines (works with some M14 magazines) Made in USA

categories:Sporting GoodsGuns

2041 impressions

83 views

$450 obo I bought it brand new last week. Stripped it down cleaned it put on a foregrip and then my truck broke and I need to sell to fix it. Never been fired. It is legal in canada .22LR comes with 2x10 round mags and an adapter to use remington 597 mags. It also fits ruger 10/22 mags. Also includes Magpull m-lok angled foregrip This model features a compact 11.7" threaded barrel and a lightweight M-LOK handguard, allowing for easy customization with lights, grips, and accessories. It also uses an AR-style Mil-Spec buffer tube and stock, as well as a standard AR pistol grip, making it highly modular and familiar for AR users. Flip-up sights are included, and the upper receiver is optics-ready with a full-length Picatinny rail. Cartridge: 22 LR Barrel Length: 11.7 in Barrel Threads: 1/2x28 Barrel Finish: Blued Stock Finish: Black Stock Material: Synthetic Stock Type: Adjustable Rear Sight: Flip-Up Front Sight: Flip-Up Magazine Type: Detachable Capacity: 10 Action Type: Semi-Auto Classification: Non-Restricted Must have PAL and will confirm. Will Not ship

categories:Sporting GoodsGuns

2258 impressions

204 views

Harrington & Richardson single-shot **12 gauge** with **factory rifled slug barrel**. Laminate stock, Picatinny rail, tight lockup, clean bore.

categories:Sporting GoodsGuns

2096 impressions

162 views

Very good condition and very accurate Marlin 1895 22" barrel with walnut stocks and deep blue steel. It is a Remington late model with excellent fit and finish and zero issues. Comes with tons of reloading stuff including 2x fired Starline brass x100, new Starline brass x100, powder, primers, Rcbs dies, shell boxes, hardcast 405gr bullets, Remington 405gr Corelokt bullets, A Vortex Diamondback 2-7 with Burris steel Zee rings, hammer spur, Weaver and picatinny rails. Priced to move. No shipping. Not parting out. Load data will be supplied.

categories:Sporting GoodsGuns

2895 impressions

193 views

Purchased this rifle, added optics and had it out a few times, but unfortunately I do not use and I am downsizing. Rifle has had 25 rounds through it. Mint condition. Will sell with or without optics. Will consider trades, price is firm. Rifle rings and Optics - $3,900.00 or separate prices below. I have original boxes for both, they are pretty much brand new, next to no use. Benelli R1 - $1,700.00 Benellis R1 big game rifle features simplicity, strength, and ingenious design. It is built around the patented Auto-Regulating Gas-Operated (A.R.G.O.) piston-driven system. The ComforTech Rifle incorporates technology that significantly reduces recoil. In comparison tests one of the competitors guns kicked twice as much as the R1 ComforTech. Imagine a .300 Winchester Magnum that feels like you are shooting a light .270 Features & Design A.R.G.O. piston-driven system provides significant recoil reduction ComforTech recoil reduction system Unparalleled versatility Picatinny rail for mounting optics Grip tight coating 48 percent less recoil Rotating bolt head ergonomic trigger guard Burris Eliminator 5 - $2,200.00 The Burris Eliminator 5 is the most innovative and effective hunting riflescope in the world. With the push of a button, the Eliminator 5 ranges and displays the distance to the target, instantly compensates and displays the exact aiming point and wind data all inside the scope for complete situational awareness. The Eliminator significantly increases your effectiveness as a hunter and eliminates the guesswork when seconds count. Use the BurrisConnect App to get the appropriate drop information to program your scope with your specific load data. The Eliminator 5 is capable of ranging out to 2,000 yards and includes the best optical system in an Eliminator yet with 5-20x magnification and super clear glass! Four tools in one advanced optics including: precision optics, an internal digital inclinometer, an integrated dope card, and a built-in laser range finder. Range out to 2,000 yards Bluetooth Remote for easy use 5-20 Magnification All-in-one: Rangefinder, inclinometer, smart dope card, and precision riflescope This rifle is non-restricted. Must provide proof of PAL.

categories:Sporting GoodsGuns

42487 impressions

875 views