ERGO Full rifle Cover Rail Covers set of 3. They clip directly onto Picatinny rails for full rail protection Molded in Santoprene Please email only.

categories:GunsSporting Goods

2617 impressions

449 views

(Right) Spuhr 0MOA Remington 700 SA top rail. Has locking pin and screws. Mounted and shows wear. Nothing functionally wrong. $100 (Left) Factory Remington Milspec 5R 0MOA top rail. Has screws. Pull off from brand new gun. $50 Local pick-up preferred. Can ship on buyers exspense.

categories:GunsSporting Goods

5360 impressions

301 views

12 gauge pump action with folding and telescopic stock... $400 without the vertical foregrip or $450 with it... I stuck it on there it's just attached to the pic rail I really liked it on there... also have two small pic rails that attach to the side of the slide Call or text 403-396-2430 Could possibly deliver depending where or ship at your expense

categories:GunsSporting Goods

8613 impressions

1055 views

As new condition, full and modified chokes, and will come with a case

categories:GunsSporting Goods

5154 impressions

598 views

Streamlight TLR-1® GUN LIGHT (NEVER OPENED) Rail-Mounted Tactical Weapon Light Part Numbers List * 300 lumens; 2.5-hour run time; 12,000 candela peak beam intensity * Powered by two (2) 3-volt CR123A lithium batteries * Rail grip clamp system securely attaches/detaches quickly and safely with no tools * Includes keys for GLOCK®-style rails, MIL-STD-1913 (Picatinny) rails, Beretta® 90two, Smith & Wesson® SW99, and Smith & Wesson® TSW * 6000 Series machined aircraft aluminum with black anodized finish * Ambidextrous momentary/constant on operation * Highly accurate sight repeatability when remounting * Fits most existing light bearing holsters * 4.18 oz (118.6 g) * IPX7-rated design; waterproof to 1 meter for 30 minutes * Remote switches available as optional accessories (must be used in conjunction with 69130 remote door switch) * Assembled in the USA The silver band that encircles the head of the TLR-1® is a trademark of Streamlight®, Inc. We do not recommend carry of a TLR® equipped firearm without a proper holster. A proper holster should fully cover the trigger guard area, preventing accidental discharge of both the firearm and light.

categories:GunsSporting Goods

9053 impressions

584 views

Was going to install these on my 2012 rmk pro 800. Never happened and sold sled

categories:GunsSporting Goods

2771 impressions

214 views

BNIB HOLOSUN HE509 red dot with ACSS VULCAN reticle. Solar powered for emergency situations. Comes with adapter plate with RMR footprints or it can be installed onto picatinny rails using an adapter ($25 ~ $30CAD). If ad is up it’s still available. Not interested in trade and low ballers will be ignored. PU in NW Calgary or shipping on your dime. F2F transaction with cash preferred. Retailed at around $850 CAD + tax.

categories:GunsSporting Goods

9703 impressions

1116 views

I have the following sets of rings/mounts/rails available. Pickup is on the West end of Edmonton. Please text or call 780-920-6855 as the best way to contact me. Shipping for any items is the expense of the buyer. New in box items are pictured. Items without boxes are in separate bags. Thank you, Tikka T3/T3X 1. Talley Lightweight - 1" - Extra Low - Used, good condition - SOLD 2. Talley Lightweight - 30mm - Low - Used, lapped - SOLD Barrett Fieldcraft These items have been discontinued and are no longer made. 3. Talley Lightweight - 1" - Low - New in box - SOLD 4. Talley Lightweight - 30mm - Low - New in box - SOLD 5. Talley Lightweight - 30mm - Low - Used, good condition (old loctite on screws) - $65 6. Talley Lightweight - 30mm - Medium - New, but no box - $70 7. Talley 0 MOA Rail (Short Action) - New in box - $70 8. Leupold 20 MOA Rail (Short Action) - New in box - SOLD Rings & Levels 9. SWFA SS-Tac 30mm Low Rings with 1" Inserts - New in box - $50 10. SWFA SS-Tac 30mm Bubble Level with 1" Inserts - New in box - $50

categories:GunsSporting Goods

20361 impressions

1475 views

Custom painted Hatsan Escort MP Turkish made Chrome lined 18" barrel with heat sheild Ghost ring sites Flash suppressor Aircraft alloy reciever Attachment rails 2 round holder Tube clip holds 5 + 1

categories:GunsSporting Goods

4189 impressions

603 views

For sale is a Marlin Model 336W lever-action rifle in .30-30 Win. It has a hooded front sight. It comes with the rings/rails for mounting a scope. There is some freckling on the metal from storage, but the round count is very low!

categories:GunsSporting Goods

8099 impressions

517 views

Grips, dummies, rails, flashlight/scope mounts, etc... You name it I'll print it (no receivers or other restricted parts) Can look at custom designs too, like a charger bridge repair for Enfield sporters etc. Doesn't have to be firearm-related prints/designs, I am fully capable of printing/designing any kind of stuff. shipping ok.

categories:GunsSporting Goods

29185 impressions

2931 views

01.Caldwell XLA 9-13" Shooting Bipod-$50.00 02.Caldwell 9-13" Shooting Bipod-$50.00 03.Accumax Premium Carbon Fiber 6-9" Shooting Bipod-SOLD 04.6-8" Shooting Bipod-$50.00 05.7-11" Shooting Bipod-$50.00 06.6-8" Shooting Bipod-SOLD 07.6-9" Shooting Bipod-SOLD 06.Harris Engineering S-BR Hinged Base 6 - 9-Inch BiPod-$180.00 01.Barska FLX 260 Lumen Tactical Flashlight & Vertical Grip-$120.00 02.Cadex Defence Grip-$20.00 03.CAA MVG- Short Forearm Vertical Grip-$20.00 04.Tactical Push-On QR Vertical Forward Folding Foregrip Grip for Picatinny Rails-$35.00 05.Foregrip/BiPod for Piccatiny Rails Mounts – Black-$30.00 06.Magpul AFG (Angled Fore Grip) Rail-Mounted Forward Grip Black-SOLD 07.F.A.B. Defense TAL 4 - Tactical Vertical Foregrip-$50.00 Please send message to:medal1958@gmail.com

categories:GunsSporting Goods

27261 impressions

2867 views

New unmounted Super High 35mm Mark 4 rings. Extra clearance for chassis rails etc.

categories:Guns

4246 impressions

466 views

https://www.18plus.ca/products/exterminator-metal-2-5-revolver Say hello to the 357. This revolver has the heavy feel users know and love, with the signature Barra precision craftsmanship and attention to detail. With a weathered finish, the 357 brings a level of experience and wisdom to your side. The 357 has a smooth, double-action CO2 power and authentic 6-shot cylinder. It performs like a beast and has an adjustable rear fiber optic sight to improve your accuracy. You can even attach a scope, laser, flashlight, or whatever you’d like to the Picatinny rails. Make it yours! The 357 offers balanced full-metal construction and polymer grip that looks and shoots like the real deal. The 357 has the look, feel, and performance that you’ll love, at the range or in your backyard. It comes in gunmetal, chrome, and aged finishes so you can choose the style you like the most. Now get shooting.

categories:Guns

9952 impressions

1136 views

G1 GLADIATOR 12 GAUGE 13" W/ HEAT SHIELD & TOP RAIL OUR NEW TACTI-COOL SHOTGUN. PRACTICAL, COOL LOOKING AND FUN TO SHOOT. 13 INCH BARREL MAKES IT EASY TO STORE FOR YOUR HUNTING ADVENTURE OR TO HAVE IT AS A CAMP GUN. ALSO, YOU CAN TAKE ON THE HIKE OR ATV RIDE AS IT IS ONLY 33 INCHES LONG. NO CHOKES. NIB Price with Taxes:$420 Shipping is not included

categories:Guns

12339 impressions

1297 views

Brand new Sealed in original package Description: 3 MOA Red-Dot with Adjustable Brightness MOTAC: Motion-Activated Illumination 1x Magnification/30mm Clear Aperture Fully Multi-Coated / Aspheric Lens 100 MOA Windage & Elevation / 1 MOA IPC CNC-Machined Magnesium Housing TruHold Lockless Zeroing System Waterproof, IPX7-Rated Picatinny & KeyMod Mounts Made in the USA Sig Sauer engineered the ROMEO1 1×30 Open Reflex Sight to enhance your firearm’s aiming capabilities. Its 3-MOA holographic illuminated reticle offers a brilliant red dot with adjustable brightness and Motion-Activated Illumination System (MOTAC). You will see your targets with clarity thanks to a specially-designed, aspherical lens that generates flat and distortion-free images. To enhance transmission of light and to eliminate glare, the lens is also treated with high-performance full multi-coatings. To account for wind and ballistics, the windage and elevation adjusters offer 100 MOA ranges with 1 MOA increments. Designed to endure the toughest battlefield conditions, this sight is packaged into a compact, durable, lightweight, and waterproof housing. To increase durability, the housing was CNC-machined from a single piece of magnesium. Another highlight of the construction is a TruHold twin-spring adjustment system. It is designed and endurance-tested to withstand handgun recoil, deliver lock-less zeroing performance, and to return to zero with impeccable repeatability. Reticle: Red-Dot reticle: 3 MOA 1 MOA impact point correction 100 MOA windage and elevation adjustment range MOTAC: Motion-Activated Illumination Optical Performance: Magnification: 1x Molded glass aspheric lens High-performance coatings Unlimited eye relief Mounting Compatibility: Picatinny rails KeyMod panels Construction: CNC-machined magnesium body TruHold twin adjustment springs ensure a lock-less zeroing and repeatability Waterproof and fogproof Shock-resistant $520 shipped Not interested in trade Thanks

categories:Guns

15663 impressions

1568 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:GunsSporting Goods

5650 impressions

544 views

Brand new Five-Position Forend Pistol Grip Ergonomic Design Textured Grip Gives You Extra Support & Stability When Shooting Installs Onto a Standard Picatinny Rail (Not Included) DuPont Extreme Temperature Glass Reinforced Polymer Matte Black Fits: Standard Picatinny rails Limited Lifetime Warranty Made in USA

categories:GunsSporting Goods

2302 impressions

418 views

Brand new Non restricted Action : Lever Caliber : 410 GA Barrel length : 18.5″ Chamber : 2.5″ Capacity : 5+1 Finish : Black Furniture :  Black Walnut Stock & Birds Head Grip Hand Grip : M-lok with picatinny accessory rails. (aluminum) Choke Kit : F, IM, M, IC, SK, including case and key Front sight : Red Fiber optic Safety : Cross bolt Made in Turkey

categories:GunsSporting Goods

5462 impressions

669 views

EGE Arms E40T, 12 gauge, over under short tactical M-lok shotgun, black, E40TBLK Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Specifications Non restricted Caliber: 12 Gauge Chamber: 3″ Capacity: 2 Choke: Cylinder, Modified, Full Break-Action Full Length: 26″ Sights: Fiber optic Barrel Length: 30 cm — 11 & 7/8″ LOP : 12″ Overall Length : 26.5″ Weight : 2.6 kg Made in Turkey Features Solid with A slick look ! M-lok slots bottom left & right ! Soft rubber butt pad 12 Gauge, 2 & 3/4 to 3″ 2 shot capacity Picatinny Accessory Rail ready to mount your favorite red dot Also acts as v-grove rear sight Break action with extractor Ambidextrous Safety/Selector Red fiber optic front sight Chokes : Cylinder, Modified, Full, case included (no key included) 2 side picatinny accessory rails already mounted and ready to rock! Rails also seems to have A QD mount slot on each side.

categories:GunsSporting Goods

8148 impressions

845 views

Brand new Compatible with 34mm Maintube 2″ Forward Cantilever Offset Height: 1.46″/37mm Quick Release Mechanism Mount on Picatinny/Weaver Rails Aluminum Construction Type III Anodized Finish Give your riflescope solid support using the EOtech 34mm PRS QD Cantilever Ring Mount. This cantilever adapter is compatible with 34mm maintubes and mounts on Picatinny or Weaver rails. It provides a 2″ forward offset for tailoring eye relief and head placement, and has a quick release mechanism for fast and easy attachment. The mount is made of aluminum with a Type III hard anodized finish and provides precision, stability, and strength when you attach your riflescope to your firearm.

categories:GunsSporting Goods

3339 impressions

544 views