Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:Sporting GoodsGuns

6266 impressions

615 views

Prices A - Single Sided Kit - $20 B - Double Sided Kit - $30 **$5 off each additional kit for any order combo (2 or more) **Ex. A+B=$50-($5 discount)=$45 Total **3x A=3*$20=$60-2*($5 discount)=$50 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) ___________________________________ Single Sided Specs/Instructions Specifications Black Anodized Stainless Steel Weight: 0.2oz (6g) Length: 0.571" (14.5mm) Equivalent to Magpul Type 1 Sling Mount Kit Kit comes with the following 1x Stainless QD Insert 1x Stainless Washer 1x Stainless Nut 3x Stainless Screws (1/2", 3/4", and 1") What you will need 1/8" Allen Key Wrench 5/16" Socket Screwdriver/Wrench Blue Loctite (Optional) Instructions 1. Insert QD Insert into stock on the desired side 2. Insert one of the 3 screws through the hole on the QD Insert 3. Insert a washer on the opposite side 4. Apply a drop of Loctite on the threads of the nut (optional) 5. Using the Allen Key Wrench and 5/16" Socket fasten the nut on the screw 6. Fasten the assembly until snug using the Allen Wrench ___________________________________ Double Sided Specs/Instructions Specifications - Black Anodized Stainless Steel - Weight: 0.4oz (12g) - Length: 0.571" (14.5mm) *each insert* - Equivalent to Magpul Type 1/Type 2 Sling Mount Kit Kit comes with the following - 2x Stainless QD Insert - 4x Stainless Washer - 3x Stainless Screws (1/2", 3/4", and 1") What you will need - 1/8" Allen Key Wrench - Blue Loctite (Optional) Instructions 1. Insert QD Inserts into stock on both sides of the stock 2. Insert one of the 3 screws through the hole of the unthreaded QD Insert 3. Using the Allen Key Wrench thread the screw and temporally fasten the assembly together 4. Function check using the QD Sling Mount on both sides 5. If the bottom of the screw is protruding too far out, remove the QD Inserts and shim off the QD Inserts with the provided Washers 6. Once the correct Screw and Washer Shims (Optional) is determined, the assembly can be fastened together 7. Apply a drop of Loctite on the threads of the Screw (optional) 8. Fasten the assembly until snug using the Allen Wrench 9. *If the Threaded Insert is spinning on it's own, the Insert can be retained via Retaining Hole with a smaller Allen Wrench (See Last Image)

categories:Sporting GoodsGuns

10215 impressions

1104 views

Brand new The Hunting Series version of the SP-3022. The SCP-3022 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts feature two separate side clamps and allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount. 10-degree wedge included 0 MIL/0 MOA Height: 38 mm/1.5” Clearance: 7 mm/.27" (from the bottom of the tube to front of bridge of the mount body) Length: 141 mm/5.55” Weight: 154 g/5.4 oz Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

7177 impressions

423 views

EGE Arms E40T, 12 gauge, over under short tactical M-lok shotgun, black, E40TBLK Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Specifications Non restricted Caliber: 12 Gauge Chamber: 3″ Capacity: 2 Choke: Cylinder, Modified, Full Break-Action Full Length: 26″ Sights: Fiber optic Barrel Length: 30 cm — 11 & 7/8″ LOP : 12″ Overall Length : 26.5″ Weight : 2.6 kg Made in Turkey Features Solid with A slick look ! M-lok slots bottom left & right ! Soft rubber butt pad 12 Gauge, 2 & 3/4 to 3″ 2 shot capacity Picatinny Accessory Rail ready to mount your favorite red dot Also acts as v-grove rear sight Break action with extractor Ambidextrous Safety/Selector Red fiber optic front sight Chokes : Cylinder, Modified, Full, case included (no key included) 2 side picatinny accessory rails already mounted and ready to rock! Rails also seems to have A QD mount slot on each side.

categories:Sporting GoodsGuns

9020 impressions

960 views

Tacstar slim line 870 side saddle + 870 rear sling mount Looking for 50$+ shipping

categories:Sporting GoodsGuns

1855 impressions

164 views

Springfield 840 caliber 30-30. 20" barrel with no sights. Side Quick removable Weaver scope mount and Weaver rings, Grizzly 3-9X32 scope, excellent bore, wood has handling/hunting marks, perfect working order.3 Rounds steel mag. The Springfield 840, Savage 340 and Stevens 325 are all the same models. Please send message to: medal1958@hotmail.com

categories:Sporting GoodsGuns

37775 impressions

3780 views

Brand new While both the UBR® and STR® come with TYPE 1 push-button QD swivel sockets pre-installed on the left side of the stock, this Sling Mount Kit– TYPE 2 can be installed on the opposite side to add additional push-button QD Sling Swivels or our own Magpul® QDM. Additionally, for running ambidextrous sling swivels on the SGA®, MOE® Rifle, MOE® Fixed Carbine, MOE® AK, Zhukov-S, Hunter 700, and Hunter X-22 Stocks, this TYPE 2 Kit must be utilized in conjunction with the optional TYPE 1 Kit. Heavy-duty black phosphatized steel construction easily installs with the UBR or STR's original hardware, or with the hardware included with the TYPE 1 Kit. Swivels not included. Made in USA

categories:Sporting GoodsGuns

2379 impressions

398 views

Brand new The KRISS Vector Ambidextrous Folding Stock is the dedicated folding stock solution for the Vector Gen 2.1 (Gen II 2017). The stock is constructed of aluminum and advanced polymer composites. The KRISS Vector Ambidextrous Folding Stock secures to the upper assembly with a push button hinge that can be configured to fold to the right or the left. The stock features two QD sling swivel mounts on the left and right side, as well as a sling loop towards the rear. In addition to folding, this stock is also adjustable for length of pull, adjusting to three positions. One end of the stock is installed directly into the Gen 2.1 Vector's upper housing. The other end is the stock itself. It is not an adapter.

categories:Sporting GoodsGuns

3314 impressions

507 views

Little Badger 22 LR Single Shot Break Open Rifle 500.140 Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available The Little Badger is the ultimate packable survival gun. Available in .22lr or .22WMR and now 17HMR. This lightweight, ultra-compact, break-open rifle is designed to go anywhere at any time. When the action is opened and the gun folded, it measures a mere 17” overall length and stows neatly in an included pack/case. The wire frame stock keeps weight to a minimum and the integrated shell holder in the back holds twelve cartridges so ammo is always at the ready. The Little Badger comes equipped with an M1 Carbine style front and rear sight. Picatinny rails are mounted top, bottom and on both sides just forward of the receiver for mounting optics and accessories. An optional handle/cleaning kit combination accessory screws into the bottom of the receiver. Compact length and weighing only 2.9lbs, the Little Badger can truly be taken and ready for use just about anywhere! MAKE Chiappa MODEL Little Badger FIREARM CLASS Non-Restricted CALIBRE 22lr MAGAZINE CAPACITY single shot BARREL LENGTH 18.5"

categories:Sporting GoodsGuns

29085 impressions

2347 views

Please text anytime 6476871484. Brand new in original box. No PAL required . Umarex AirJavelin Air Archery Rifle comes with 2 adapters for 1 and 2 Co2 12g cartridges to use instead of 88gr CO2. 300 FPS 34 FPE 27 shots Powered by (1) 88gr CO2 or (2) 12gr or (1) 12gr  with adapters included. Straight-pull, bolt action cocking Integrated picatinny rail for optics and accessories Push button safety Will accept aftermarket quivers Fixed orange fiber optic front sight Adjustable rear sight Adjustable AR style buttstock M-Lok mounting slots on right and left sides of the rifle Includes 3 arrows Umarex introduces a new tool for small game hunting and recreational arrow shooting with the AirJavelin! Powered from a single 88 gram CO2 cartridge for up to 27 shots, the AirJavelin provides easy accuracy and enjoyment for the whole family. At under 4lbs without CO2 installed, the rifle is easy to manuever and thanks to an easy adjusting AR style buttstock, can be made to fit shooters of all sizes quickly. Sending 170 grain bolts at speeds up to 300 FPS, the AirJavelin produces energies of around 34 FPE at the muzzle. While this may not seem like a powerhouse, simply unthreading the field tip and screwing on a broadhead turns this rifle into a nightmare for small game! And because the arrow is propelled from the front, there is no "archers paradox" to concern yourself with, meaning your shots will find their mark time and time again. The AirJavelin has plenty of room for accessories. With a full length picatinny optics rail, you have space to mount the optic of your choice, with room to spare for lights and lasers. In addition, there are also M-Lok mounting slots on the right and left sides of the frame allowing for even more accessories, like a quiver or a bipod. The possibility are seemingly endless.

categories:Sporting GoodsGuns

40715 impressions

3872 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

5600 impressions

439 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

6147 impressions

559 views

Brand new Sling Mount Kit – TYPE 1 can be added to either side of the SGA®, MOE® Rifle, MOE® Fixed Carbine, MOE® AK, Zhukov-S, Hunter 700, and Hunter X-22 Stocks for use with push-button QD Sling Swivels or our own Magpul® QDM. Heavy-duty black phosphatized steel construction easily installs with provided hardware. Swivels not included. Made in the USA.

categories:Sporting GoodsGuns

3621 impressions

564 views

Brand new The JULIET4 4x Magnifier is designed to work as a stand-alone magnification solution or in conjunction with reflex optics. This family of magnifiers is an excellent choice for transitioning from close quarters to intermediate ranged targets. In conjunction with a reflex optic, the JULIET4 can be adjusted for height through the use of spacers. It has a PowerCam 90° Mount so it can be quickly flipped to the side for more immediate, close quarters scenarios or deployed rapidly to bring targets four times closer. Its quick release mount comes with built-in recoil lugs for repeatable zero. The JULIET4 has a front and rear thread-in lens protector to keep it secure from the elements. ROMEO4H FEATURES: Designed for modern pistols, MSR platforms and shotguns Comes standard with solid and see-through lens covers and quick release mount Ballistic Circle-Dot and Ballistic Circle QuadPlex options Users can select from 4 different integrated reticle options (Dot, Circle-Dot, Dot with Holds, Circle-Dot with Holds) 50,000+ hour battery life and the readily available CR2032 battery is side loading for quick battery replacement. Unlimited to acquire aiming point and target, regardless of eye position behind sight. MOTAC (Motion Activated Illumination) powers up or down when sensing motion Uses an ultra-efficient red LED illumination for daylight visibility and extended runtime True QR mount and low mount included Strong, lightweight aircraft-grade CNC aluminum housing Waterproof, IPX-7 rated, and fog-proof. JULIET4 Features: Aircraft grade CNC aluminum housing ensures a lifetime of reliable service. IPX-8 rated for waterproofing — up to 20 meters for 1 hour Dialectic coated prism size and weight Objective thread-in lens cover and ocular slip-on, flip-back lens cover included Backed by an Infinite Guarantee™

categories:Sporting GoodsGuns

5538 impressions

419 views

1220 shipped, first “ill take it” gets it. Smoothest grizzly you’ll find, has two mags that feed well. This gun hasnt ever given me a problem, looks good and has all the extras you need. Magpul stock, Dlask fore end, flashlight and mount, cerakoted breachblock and trigger, polished internals, rail, and side saddle You can toss the barrel on any 870 as long as the mag tube is shortened. 

categories:Sporting GoodsGuns

2724 impressions

218 views

BNIB HBI-10237-01 Buyers pay the shipping, contact me for an estimate. CZ Bren 2 Handguard 13.8″ M-Lok (GEN 2) The HBI 13.8″ handguard for the Bren 2 MS is ideal for 14″ barrel models in both 556/223 and 7.62×39 calibers. Our 13.8″ handguards are designed to truly “free float” the barrel and provide the operator with over 3x the support hand area and over 7x the M-Lok positions as compared to the factory Bren 2 MS handguard. PEQ-15/ATPIAL type IR sight systems and peripheral switches are easily mounted out front above your support hand thanks to a full length continuous 1913/picatinny top rail. Our extended Bren 2 MS handguards feature a window at the gas block that has been carefully designed to allow operator access to gas system adjustments while in use. The gas block window is bridged with a removable 1913 plate. With the 1913 plate removed, the gas block and regulator are exposed for complete disassembly and cleaning. This two piece design allows access to the gas system without having to remove the handguard shroud from the weapon. Additionally, the use of two countersunk screws to secure the 1913 plate means that sighting systems mounted the to 1913 plate WILL retain zero when the plate is removed/reinstalled after cleaning. Every handguard includes an integrated QD mounting plate system for seamless sling integration on either the left or right side. Additionally, we are proud to offer a direct mount light variant compatible with Surefire® 300/600, StreamLight® Protac Rail, Modlite 18650 series, and other popular bodies. The simple and robust mounting design replaces a single M-Lok position with body specific mounting geometry for weapon lights. This light mounting solution offers the simplest, lowest profile, lightest weight, and arguably most rigid light body integration at no additional cost. If your application requires a weapon light, you might want to consider this option. Features 13.8″ M-Lok Handguards for the CZ Bren 2 MS Gen 2 Two Piece Design With Direct Access to Gas Regulator M-Lok Accessory Interface, Full Length 1913 Top Rail QD Mounting Plate Included Optional Direct Mount Light Geometry for select Surefire® and StreamLight® Bodies Total Weight Installed is 12.04 oz (Factory Bren 2 MS Pistol Handguard is 10.27oz) Machined Aluminum 6061, Anodized MIL-A-8625 Type 3 Hard Coat Multiple Patents Pending Designed and Manufactured completely in USA. 922r Compliant.

categories:Guns

9407 impressions

621 views

Brand New SVT 40 scope mount. Designed to align with the barrel by inserting in side horizontal slots of a gun. 6061-T6 Aluminum, Black Hard Anodized Finish. Shipping extra. Picture of the gun its just for general idea.

categories:Sporting GoodsGuns

9998 impressions

763 views

Brand new The ROMEO3XL open reflex sight is the ideal sighting solution for MSR rifles, shotguns, carbines, submachine guns, and full-size handguns. The ROMEO3XL features a high transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion. 3 MOA  red dot with multiple intensity settings ensure rapid target engagement under a full range of lighting conditions. The large 35mm lens offers an unparalleled field of view in an open reflex sight. High transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion 6 MOA dot with multiple intensity settings for rapid target engagement under a full range of lighting conditions MOTAC (motion activated illumination system) powers up when it senses motion and powers down when it does not Side loading CR2032 battery Comes with a low-profile M1913 Picatinny mount Aircraft grade CNC alluminum housing Dependable waterproof (IPX-7) and fog proof performance Finish: Black Height: 1.4 Inches Length: 2.1 Inches Style: Reflex Weight: 1.5 Ounce Width: 1.3 Inches Magnification: 1 Adjustment Click Value: 1 MOA Warranty: Sig Sauer Electro Optics Infinite Guarantee Battery Type: CR2032 Reticle Color: Red Housing Material: Aluminum

categories:Sporting GoodsGuns

6251 impressions

489 views

This mount holds 2 scoped long guns in a horizontal position parallel to the roof of your side by side, or older pickup with a steel roof. Keeps them out of the mud, but also within reach. Bought it years ago and never installed it, so can't comment on how well it performs. Made by Big Sky Racks in the USA, not a cheap, chinesium knockoff. Measurements in pics.

categories:Sporting GoodsGuns

1580 impressions

101 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 145 g/5.1 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11832 impressions

474 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 34 mm/1.35” Length: 108 mm/4.25” Weight: 154 g/5.4 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11217 impressions

394 views