PRESENTING THE 1894 WINCHESTER RIFLE, A REMARKABLE FIREARM BOLDLY DATED 1900. THIS LEVER-ACTION MASTERPIECE, CHAMBERED IN .32 SPECIAL, COMMANDS ATTENTION WITH ITS DISTINCTIVE HALF-OCTAGON, HALF-ROUND MAGAZINE BARREL. A DEFINITIVE ADDITION FOR ANY SERIOUS COLLECTOR OR GUN ENTHUSIAST, THIS RIFLE EXEMPLIFIES TIMELESS QUALITY AND PERFORMANCE. DON'T MISS THE CHANCE TO OWN THIS ICONIC PIECE OF HISTORY. THIS RIFLE, DATED TO 1900, HAS A 23 1/2" BARREL AND A 41 1/2-INCH OVERALL LENGTH AND FEATURES A BRIGHT BORE WITH SUBSTANTIAL RIFLING. THE WOODEN STOCK IS WELL-MAINTAINED, SOLID, AND FREE OF CRACKS. IT IS EQUIPPED WITH A STEEL CRESCENT BUTT PLATE, AS WELL AS FRONT AND REAR SIGHTS THAT INCLUDE WINCHESTER FLAT TOP AND BLADE SIGHTS. THE RECEIVER HAS DEVELOPED A TYPICAL DARK PATINA, WHILE THE WOOD STOCK AND FOREARM SHOW NO CRACKS OR SCRATCHES. OVERALL, IT IS IN VERY GOOD CONDITION FOR ITS 125 YEARS OF EXISTENCE. PLEASE NOTE THAT A POSSESSION AND ACQUISITION LICENSE (PAL) IS REQUIRED FOR PURCHASE. ASKING PRICE: $1,475 (SHIPPING INCLUDED) THANK YOU FOR REVIEWING THIS INFORMATION. I APPRECIATE YOUR TIME AND CONSIDERATION.

categories:GunsSporting Goods

1069 impressions

361 views

Very good condition as photos show. No issues, clean and tested. Fixed full choke.   Please use cell phone text messaging. Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:GunsSporting Goods

5486 impressions

292 views

This bolt action single shot shotgun was made in the 1870's and probably converted to a shotgun in Belgium in the 1890's. the gun is in working condition, has a crack that has been repaired by pins shown in pictures. also has some scratches shown in pictures. open to trades Located by evansburg, but make frequent trips to spruce grove.

categories:GunsSporting Goods

77077 impressions

5379 views

I have a Model 1908, 12 gauge single shot, Harrington and Richardson arms CO( Worcester.mass.USA made in USA) (12 gauge choke) for sale. This 12 gauge single shot has had the barrel shortened to about 20 inches. Barrel and receiver are in nice condition with little to no scratches shown in pictures. Wood has nice handmade woodburning engravings of two dragons on butstock, forend had wood it ing of dragon eye. Buttstock had been repaired showed in pictures. Gun is in overall good working condition. Open to trades. Located in evansburg but make frequent trips to spruce grove .

categories:GunsSporting Goods

45139 impressions

1228 views

I have a 1941 XIX 6.5 x52 Carcono single shot for sale. gun is in good working condition, stock is in good condition has some small scratches shown in pictures. bolt is in great condition for age, has been modified to single shot. open to trades. Located in evansburg but make frequent trips to spruce grove .

categories:GunsSporting Goods

58660 impressions

3345 views

Original Lee-Enfield No.4 Mk I top guard set, purchased from Numrich Gun Parts (USA) back when they carried original surplus parts. No visible maker stamps; includes the metal muzzle cap as shown. Structurally sound and ready for restoration or use in a parts build. Sold as pictured. No trades. Will ship on buyer's dime.

categories:GunsSporting Goods

3759 impressions

221 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5545 impressions

385 views

Offered for sale as I am l no longer reloading 9mm.  I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***

categories:GunsSporting Goods

1299 impressions

79 views

DEPRIMED AND TUMBLED - About 20 or so were fired twice while developing a load.......offered for sale ( case-gards included ) as I no longer shoot 9mm.    I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***

categories:GunsSporting Goods

1210 impressions

66 views

 Just found some shell holders,  in the back of the bottom drawer of my loading bench, for a Lee Hand Primer ( which I haven't had for over 30 years ), and which are no longer useful to me for reloading. There are only these six shell holders remaining ..... #s 1,3,4,12,14 & 18 complete with plastic case which has room for 6 more.   I am willing to ship at buyer’s expense ( dependent upon CPC's strike rotations ), or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.      ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

3550 impressions

118 views

Offering 7 various shell holders for $ 7.50 each or $50.00 for all of them. These are for calibers which I no longer reload and some of them were rarely used.....I have listed them by make and number and the caliber for which " I used them " , but most will also be usable and  are listed in the charts for dozens of other calibers:  RCBS # 22 for .43 MAUSER  ,  LYMAN # 3 for 7.62x39  ,  LYMAN # 13 for 300 WEATHERBY MAG  ,  LYMAN # 19 for .30 CARBINE  ,  LYMAN # 15 for 8MM MAUSER  ,  RCBS # 17 for .32 ACP  ,  Unmarked ( LEE ? )# 9 which was for 44-40 WIN. & .44 MAG. Please consult an online, or your own,  Shell Holder Cross Reference Chart to satisfy yourself and verify, what cartridge they will fit.  I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.        ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   *** 

categories:GunsSporting Goods

3991 impressions

126 views

I received this in my Christmas stocking last year ( for a gopher shooting accessory ) but never was able to use it,  having sold my gopher rifle the month before......a good deal for someone who shoots .223 or a similar rifle.    I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.        ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   *** 

categories:GunsSporting Goods

2516 impressions

72 views

OFFERING A VINTAGE ( circa 1900 ), UNION METALLIC CARTRIDGE COMPANY ADVERTISING TARGET......measures 5 1/2" x 4 1/4"..... EXCELLENT CONDITION !!! I am willing to ship at buyer’s expense by letter mail, , or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there or enroute for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

19399 impressions

660 views

NEVER USED...... received as a Christmas gift many years ago ( very much appreciated ) but never used , as it was never part of my BP cartridge shooting regimen, which always worked just fine as it was. Note the rubber sealing ring.....good Buffalo Arms quality item.....total length approx. 19 1/4 inches. I am willing to ship at buyer’s expense ( dependent upon CPC's strike rotations ) , or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

11401 impressions

467 views

Custom built metal stand to hold presses, powder measures, etc. It can be bolted or clamped to a bench or table to bring your equipment to a comfortable working height. The tubular steel is 5 inches in diameter with a 7 inch diameter base and overall height of 10 inches which has been powder coated in black. The weight is 4 lbs. 12 oz. PLEASE NOTE - the sale is for the STAND ONLY and the press is NOT INCLUDED. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

28277 impressions

1400 views

At a bargain price.....one new , unopened pack of 3 bronze bore brushes in .25 caliber which I no longer need as I no longer have my 25-20 Winchester. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

13782 impressions

391 views

16 oz. reloading room/range accessory, which keeps your coffee hot or " other beverage " cold while you are reloading or at the range ..... bought a few of these at a gun show in Denver in the year 2000 but this one was never used, so is in excellent condition. If you have your own pictures, you can unscrew the bottom, remove the photo sheet as a template and replace it with your own pictures. I'm not sure who made it, but the bottom is marked patent pending and matches some of my early Starbucks bottoms that were ( and still are ) all made in China----BOTTOM MARKED " do not microwave" and " hand wash only" also like the Starbucks tumblers and in the same script. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

21732 impressions

606 views

Previous sale cancelled due to non payment.....Still 0ffering straight sided, paper patched ( .4035 to .4045 ) medium hardness 8/9 which were very accurate in my original 40-70 and 40-50 sharps rifles. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

10578 impressions

522 views

Offering an "almost new" ( only used 4 times ) .44 mag / spl resizing die with ring spacer.....please note this is a steel and NOT carbide. Years ago when I hit age 75 , case lubing suddenly became a chore so I purchased individual carbide resizing dies for all my die sets and just recently found this one in my junk box ......a good deal for someone in need of a good die in "like new" condition. I am willing to ship at "BUYER'S EXPENSE" , or offer local pick up. I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

7192 impressions

230 views

I have for sale a very unique Cooley Model, 39 22 S, L,LR that was presented as 1st prize for the 1955 Boy Scouts jamboree in St Catherines for Boy Scout target shooting. Gun is all original and sports a nice brass commemorative plaque, which is nailed to the buttock as shown in pictures. Gun also comes in original Cooey box. $500 shipped for this very cool piece of Canadian boy Scout history.

categories:GunsSporting Goods

1731 impressions

183 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1889 "Navy", .41 Long Colt Revolver This one is in excellent condition. It bears about o 99% of its original nickel plating. The nitre blue on the trigger, hammer and screw heads is well visible. The action is smooth and accurate, and the cylinder indexes and locks properly. The bore of the 4.5 inch barrel is fine and bright, with sharp rifling. The markings are sharp and defined throughout. The assembly numbers match on the cylinder, crane, barrel and frame. The grips are excellent and undamaged, showing no wear.SN 20959, rated excellent overall.​​ History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand. This would prove to be a weakness in the design, and by 1892 locking lugs on the outside of the cylinder were introduced. The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:GunsSporting Goods

10580 impressions

567 views