*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Federal 2 1/2" #9. Less than 10 boxes = $35 per box. 10 or more boxes = $32.50 per box. Price is FIRM. Will not respond to lower offers. 57 available. Update: 23 remaining Troy (US made,Florida) 3" #7.5. $35/box. 12 boxes available. Update: SOLD Sterling 2 1/2" slugs. $40/box. 20 available. Update: SOLD If you contacted me via email, check your junk/spam folder for my reply email. Some people have notified me that it was going to that folder. Challenger 2 1/2" #6. $40/box. 20 available. Update: SOLD  Pick up in Calgary. No shipping.

categories:Sporting GoodsGuns

52524 impressions

1565 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:Sporting GoodsGuns

87770 impressions

2576 views

Many survivialists, competition shooters and outdoorsmen fear it... a dead battery in their reflex sight. While some have opted to make compromises and surrender the speed of a reflex sight for the comfort of something less effective, Vector Optics is poised to change all of that will the introduction of the various Solar Augmented sights. They still require a battery but will draw power from ambient light to prolong that battery life. All versions sold by Specter Arms are multi reticle, with minimal weight or bulk while preserving the main reason to get a reflex sight; speed. All of these units can be mounted on a picatinny rail. _____________________ Vector Optics Scrapper (SM45) $80 (sale) This is a closed, tube style optic. It comes with 2 different mount heights, one for modern sporting rifle where the comb of the stock and the mounting plane are on the same level or a low profile mount for traditionally stocked firearms such as lever actions. Caliber Range (max): 20ga, 762x39mm. Ideal For: Shotguns, SKS, FX9, Scorpion, Raven, Templar, wk180, ws-mcr, tavor, APC, Bren _____________________ Vector Optics Frenzy-X $250 This is an open micro reflex sight that is easily mountable to a pistol or a traditionally stocked firearm where the comb is lower than the mounting plane. It can be used with a modern sporting rifle with the addition of a riser. This is strongly recommended as a sight for 45-70 lever actions. Caliber Range (max): 12ga, 45-70. Ideal For: Shotguns, PC9, SKS, lever actions, pistols(RMR or picatinny), M10x, Type 81 _____________________ Specter Arms is a dealer for Vector Optics and there is more on the website. Send a text message to 7809079585 for more information. Shipping available at actual cost or pick up in SE Edmonton. Please click on my user name for other ads or information on shipping policies. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:Sporting GoodsGuns

120183 impressions

2318 views

Complete in very good condition 1893 Mauser bolt action with a new/old model 70 Winchester 30-06 barrel ( never fired ) Barrel is threaded for the Mauser action, but not cut for the extractor. Contact me with your email and I will forward pictures. Please note that I have lowered the price on this item.

categories:Sporting GoodsGuns

11376 impressions

447 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. High brass 2.5" #9 shot. Federal 2 1/2" #9. Less than 10 boxes = $35 per box. 10 or more boxes = $32.50 per box. Price is FIRM. Will not respond to lower offers. 57 available. Update: 23 remaining Pick up in Calgary. If you contacted me via email, check your junk/spam folder for my reply email. Some people have notified me that it was going to that folder.

categories:Sporting GoodsGuns

55599 impressions

1605 views

Gen 1 5.56/.223 WK180 Grey DD buttstock and grip 12 grey magpul rail panels Magpul flip up irons Stub grip with battery compartment 3D printed shell deflector TNA slip over fake suppressor 1 pmag provided I have not added the adjustable gas valve, brass piston rod bushing or the bolt release switch which can all be purchased from TNA Minor wear on lower receiver finish Will include scorpion red dot and cover for $50 No trades, face to face deal preferred.

categories:Sporting GoodsGuns

7741 impressions

340 views

Looking for the following ammo: 7.5x55 Swiss 6.5x55 Swedish 30'06 .308 / 7.62NATO 7.62x54r 7.62x39 Preferably in bulk.   Located in Lower Mainland BC but can pay to ship. Also have friends in Edmonton and Toronto that could pickup. 

categories:Sporting GoodsGuns

47395 impressions

2065 views

The KS7 is designed for many applications, but it lends itself perfectly to home defense, back country hiking or anywhere you need a compact 12ga shotgun. Its intuitive, simple features, optional Picatinny-style rail and M-LOK accessory mounting solutions make it very versatile.
The KS7 might be short and slim on the outside, but it’s long under the hood. Its 18.5″ magazine tube holds 6+1 or 7+1 depending on your choice of shell size. The 18.5″ barrel gives you plenty of 12ga velocity to maximize the performance of your preferred loads.
Bullpup Design
You get extra capacity and standard velocity in a shotgun that’s just over two feet long. How do we do it? We bullpup it. We kept the business end right where it’s supposed to be, but we took the party out back. With rear loading and downward ejection, we’re able to keep the KS7 a 12ga micro-beast that’s easy to handle. 
Picatinny Rail Kit
 511 Aluminum Follower
 Shotgun Extended Butt-pad Hi-Tech Steel Defender Muzzle Brake Hi-Tech Lower Rail Mod Attachment Hi-Tech 7-Shell Ammo Side Saddle X2 Hi-Tech Custom KS7 Mini-Side Angle Rail (Left or Right) Hi-Tech KS7 Shotgun Striker Pump Handle Blackhawk 63” gun bag

categories:Sporting GoodsGuns

21209 impressions

1820 views

Introducing an innovative solution for mounting optics to your pistol slide: The Versa Tactical SIGHTSECURE dovetail mount. Available for Beretta and for Glock. To purchase, head to this link: https://partsonly.ca/product/glock-dovetail-optic-mounting-kit/ This system allows the user to install an optic on a slide that does not have an optic cut. Made of a solid piece of 4340 steel, this mount will not bend or break. Has been extensively field tested with thousands of rounds fired. There are no moving parts, latches or other components to wear/break. Simply slide the Versa Tactical mount in the slot where your factory rear sight goes, and install the 2 expander screws. Then your optic is ready to go on! This mount allows for mounting of any industry standard RMR footprint optic. We recommend using a small amount of blue loctite for installation of all the hardware. Ensure the expander screws are inserted until flush and snug, but do not over-tighten! We recommend tightening of the optic mounting screws to either 14in-lbs or to your optic manufacturer's specification, whichever is lower. The Glock mount is compatible with the following models: 9mm – G17,G19,G26,G34,G45 10mm Auto – G20,G29 .357 – G31,G32,G33 .40 SW – G22,G23,G24,G27,G35 .45 G.A.P. – G37,G38, G39 .45 Auto – G21,G30,G36,G41 This Glock dovetail optic mounting kit will not fit and is not suitable for the Glock MOS models! The Beretta mount is compatible with the following models: M9 M9 Exclusive M9A1 M9A3 M9A3 Black M9 22lr 92 Fusion Black 92 Fusion Blue 92 A1 92 Compact 92 Compact w/ Rail 92 Compact with Rail Inox 92 Vertec Inox 92FS 92FS Fusion 92FS Inox 92FS Brigadier 92FS Brigadier Inox 92G 92G-SD 92G Elite 92X Centurion 92X Compact 92X Compact w/ Rail 92X Full Size 98A1 98FS 98FS Inox 90 Series Inox This mounting kit will not fit and is not suitable for the following Beretta models (including but not limited to): ANY Beretta Optics Ready Models 92FS Centennial 92 Performance 92 Performance Defensive 92 RDO Compact M9A4 Centurion Taurus 92 Color: Black Material: 4340 Steel Kit includes: 1x Versa Tactical SightSecure™ optic mounting plate for rear sight dovetail 2x Expander screws 2x Optic retention screws 1x HEX driver

categories:Sporting GoodsGuns

29260 impressions

1136 views

Guntec USA Bolt Carrier Group - 9mm ***$210 Shipped*** Compatible With GLOCK & Colt Style Lower Receivers Dust Cover Compatible Fully Heat Treated MIL-SPEC 8620 Steel Total Weight : 14.9 Ounces QPQ Salt Bath Nitride Finish External Extractor USA Made

categories:Sporting GoodsGuns

8900 impressions

549 views

looking for buttstock and lower forestock for a #5 m1 lee enfield jungle carbine

categories:Sporting GoodsGuns

17835 impressions

1123 views

Hi, I have for sale or maybe trade a brand new never fired Chiappa kodiak lever action in 45-70 government Cal. This is a fine italian made rifle, based on the  Winchester 1886 model but with lots of improvements, like: heavy barrel, fiber optic front sight, full adjustable Skinner rear peep sight, Scout Picatinny rail, Chrome matte steel finish, walnut stock and forend with black rubberized finish, extraction by ejectors, new loading gate desig (Smoother and pinch free), sling studs. 4 rounds magazine tube capacity The stock has bee  customized with an extended thicker, Limbaver shock absorben pad to help with.the recoil of this powerful round, also the rifle is comming with an installed 2-6 power Bushnell Elite scout scope and rings. I am asking only $2000 for the set up,  I could take some  trades or partial trades with a market value not lower than the $2000 , price of the rifle as it is is way over that, so low ballers please don't waist mine and yours time. Trades that I am particularly interested are: Light hunting or long distance 308, Marling Dark series 44 mag,  357mag or S&W Stealth Hunter, Browning BLR 308, Henry Homesteader, maybe a 30-30 or 30-06 rifle, Beretta 1301 or Ultima Patrol, Mossber 590S,  SR45, 12Ga. Short barreled break action shotgun, etc  Trades are only local, face to face. Shipping is available for buyers at their expense. If you are interested please send me a text  (403)615=7461 with info and pics for trades. PAL verification is mandatory. Thank you.

categories:Sporting GoodsGuns

5149 impressions

369 views

Can send a picture upon request. Looking to get a scope with lower magnification for hunting applications. Comes with sunshade and vortex scope flip covers (total value approx: $150) and original see through bikini cover. Has very light faint marks from where the rings were mounted. Text 778-888-2805 with questions or offers.

categories:Sporting GoodsGuns

1012 impressions

215 views

SAKO Rings Original Rings, came on a new rifle bought in 1987, one inch, low, $110 plus mailing cost. Another set for parts, 26mm except one lower half is 1”, low, missing one clamp, $25 plus mailing cost. More pics to email or text. Located in Ottawa Thanks for looking

categories:Sporting GoodsGuns

7361 impressions

630 views

Hornady Lock-N-Load Ammo Plant Kit NEW LOWER PRICE - $1600.00 for complete system THIS PROGRESSIVE PRESS KIT IS LIKE NEW, it was mounted but never used ever. NOTE: This kit is missing the Case feed and Bullet Feed Hoppers. Parts & mounting arms are included. Additional items included (Over $750 value): 5 Lock-N-Load bushings (Total of 15 included) Case Activated Powder Drop Lower Assembly Shell Plates- #8, #45, #10 & #6 Bullet Feed dies for 38/357, 40/10mm, 380/9mm & 451/452 & MORE …. Everything in the photos is included.

categories:Sporting GoodsGuns

3537 impressions

650 views

My back up scope. The scope was installed twice temporarily on savage 17hmr and s20 6.5 cr for very short time to check the guns out of the box. Excellent like brand condition. There are some Bushnell engage scopes for lower price. Not this one. $549 retail now. This scope has quality like Nitro series scopes but, with a difference like tactical pop up turrets to adjust elevation and vindage and push it in back to lock them. Side focus Elevation and windage at zero from factory. Deploy MOA with a thin reticle 30 mm tube 13-5/8in long with lens covers.

categories:Sporting GoodsGuns

3043 impressions

350 views

Brand new Features a slim-line design for superior ergonomics and handling, while also preventing hang-ups in gear and surroundings. The design includes a top picatinny rail with inner channel in order to allow use of iron sights while the rail is installed. M-LOK interfaces are located on the sides, bottom and lower 45 degree angles. Manufactured with hard-coat anodized aluminum, with a premium matte black finish. Fits LMG and M models. Does not fit SA, SE and SR. Includes installation instructions, hex keys and spare set of hardware.

categories:Sporting GoodsGuns

3234 impressions

525 views

Riton, 3 Tactix ARD, Red Dot, .5 MOA, QD Mount, 3TARD Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Specifically designed for the AR platform, the 3 Tactix ARD is a high performance, adaptable red dot. This lightweight red dot comes with a skeletonized, lower 1/3 co-witness Quick Disconnect (QD) mount. The 25mm objective allows for quick target acquisition, while the 2 MOA illuminated, red dot allows for precision in the field or at the range. PRODUCT FEATURES: 1/2 MOA Windage and Elevation Adjustment 6 Levels of Red Illumination Featuring On/Off Between Each Level 40,000 Hours Battery Life

categories:Sporting GoodsGuns

2680 impressions

355 views

Brand new Features a slim-line design for superior ergonomics and handling, while also preventing hang-ups in gear and surroundings. The design includes a top picatinny rail with inner channel in order to allow use of iron sights while the rail is installed. M-LOK interfaces are located on the sides, bottom and lower 45 degree angles. Manufactured with hard-coat anodized aluminum, with a premium matte black finish. Fits SA and SE models. Does not fit LMG and SR. Includes installation instructions, hex keys and spare set of hardware.

categories:Sporting GoodsGuns

3894 impressions

567 views

Brand new Model Number: EXPS2-0GRN Night Vision-Compatibility: None Water Resistant: Submersible to 10ft. (3m) Mount: Quick-detach lever fits both 1 Weaver and MIL-STD-1913 rail Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EXPS2 offers true 2-eyes-open shooting and provides an unparalleled targeting experience. The all-purpose EXPS2 features easy-to-adjust side buttons and a quick-detach lever. It has a transversely-mounted lithium 123 battery. The increased height of the EXPS provides iron sight co-witness access in the lower third of the viewing window. Whether you’re using the sight for law enforcement or hunting, the EXPS series sights are the premier optics in the line.

categories:Sporting GoodsGuns

3770 impressions

465 views

Holosun AEMS Multi-Reticle Green Dot Sight The AEMS 211301-Green (Advanced Enclosed Micro Sight) is a compact optical sight with 2x larger lens surface area than standard 20mm micro style sights for increased FOV. AEMS-Green is made from 7075 aluminum and includes a 1.63” dot height (lower 1/3 co-witness) Picatinny mount. FEATURES Large FOV in a Compact, Lightweight package Motion On with Last Setting Recall Up to a 50,000 Hour battery life Solar Failsafe™ Multi-Reticle System™ (MRS): 2 MOA Dot, 65 MOA Circle, Circle-Dot Shake Awake Technology™ Super Green LED In the Box : Lower 1/3 Co-witness Mount Multi Tool Clear Flip-down Len Covers User Manual CR2032 Battery Lens Cloth SPECIFICATIONS OPTICAL DATA Reticle 2 MOA Dot & 65 MOA Circle Light Wavelength 590nm Reticle Color Green Parallax Free Yes Unlimited Eye Relief Yes Magnification 1x Multi-Coatings Yes ELECTRONIC DATA Power Source Solar & Battery Battery Type CR2032 Battery Life (Hours) 50,000 Brightness Settings 8 DL& 4 NV PHYSICAL DATA Window Size 1.1 x 0.87 Dimension (in) 2,2 x 1.54 x 1.7 Weight (oz) 3.9 MECHANICAL DATA Housing Material 7075 T6 Aluminum Surface Finish Anodized Adjustment per Click 0.5 MOA W&E Travel Range ±50 MOA ENVIRONMENT DATA Storage Temperature -40℃~70℃ Working Temperature -30℃~60℃ Submersion IPX8 Vibration 1000G

categories:Sporting GoodsGuns

3621 impressions

607 views