Selling/trading an LSA (London Small Arms) No. 1 Mk III .303 British. Overall it's in very nice shape. Bolt, receiver, barrel, and rear sight are matching. Steel is all in very nice shape throughout, normal patina finish. Wood stocks are also in very nice shape with only light imperfections here and there to note. Bore is in excellent shape, bright and crisp. Comes with sling pictured. Missing two sling loops. Overall a very nice rifle. Looking for $1295 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

1046 impressions

108 views

(THIS RIFLE IS NOT AVAILABLE ANYMORE - IT HAS BEEN SOLD) Ad Title: Enfield Snider MK II, made by BSA, 1872, Cal. .57 Snider - Sporterized Make :  Birmingham Small Arms, England Model: Enfield MK II, Conversion Snider (Dated 1872) Serial Number: N/A Type of action: Snider Action   Barrel length: 26 inches Caliber: .57 Snider Note: The wood was shortened and the firing pin is missing. This rifle was used by the Military Canadians with the DC marking. Condition: Good overall condition. The hammer works properly with a strong spring. The door is easy to open. The rifling is still visible. The wood may have been sand blasted lightly since we can still see the markings. Permit: No PAL required (Historical firearm) Price: $450.00 Cdn Ref:  25A118 Shipping: $50 in Canada Basic Insurance: $100 included with all purchases Full insurance: Add 1% of the value of your purchase to get full coverage Payment: By E Transfer

categories:GunsSporting Goods

1054 impressions

198 views

For sale is a Lee Enfield Mk III bolt action .303British rifle. Metal is untouched with a replacement mag. Action is in an ATI montecarlo synthetic stock. Made in 1940 with strong rifling present. Shoots point of aim with hunting ammo at 100 yards, nice paper plate group. Asking $400 shipped, last price drop. EMT only or cash deals in the Calgary area. No trades at this time. Thank you for your interest, Crover

categories:GunsSporting Goods

20062 impressions

1657 views

I have a 1946 dated Longbranch C No 7 Mk 1 .22 long rifle training rifle. It is in very good to excellent condition. Interestingly, it has no serial number on the receiver or the wristband, but one on the bolt. It has the proper magazine and target sight. Bore is clean and bright. This is likely a post-war rifle built from parts auctioned off when Longbranch closed. I also have a transit case for the rifle. I’m asking $2,100.00 for the rifle largely because it is not a war production gun. As always, the first person to pay for the rifle gets it. Shipping is not offered, but will ship if necessary. Just as a “for instance”, Canada Post shipping to the GTA from Alberta would be approx.  $175.00 for parcel post. More pics on request. Offers welcome.

categories:GunsSporting Goods

2216 impressions

217 views

Looking for a Christmas present? Good utility hunting rifle...backup gun for that fancy 6.5 Creed? Truck gun? Look no further. Rifling strong. Shoots great. Goes bang every time. Barrel is full length. Some pitting on outside of barrell. Looks to have been an Indian gun made by Birmingham Small Arms Co. (BSA) $300 Call or text 4039238656 In Grand Prairie but can ship for $60

categories:GunsSporting Goods

3543 impressions

315 views

Thing still has stickers on it took it out once put maybe 150 rounds threw so basically new

categories:GunsSporting Goods

1546 impressions

190 views

UP FOR YOUR CONSIDERATION IS AN UNTOUCHED 1915 ENFIELD MK 111. THE UNIT OPERATES VERY NICELY AND THE RIFLING AND BARREL ARE IN PRIME CONDITION. THE STOCK BEARS THE CONDITION OF BEING IN 2 WARS (SEE PHOTOS). COMES COMPLETE WITH A C BROAD ARROW SLING. LOCATED IN EAST VANCOUVER. EMAIL ME IF YOU HAVE ANY QUESTIONS. $900.00 OBO. PAL REQUIRED

categories:GunsSporting Goods

1873 impressions

199 views

Knight MK-85 .54 cal muzzleloader with Scorpion variable scope. RH Synthetic thumb hole stock, stainless barrel. Also comes with .54 cal bullets and cleaning supplies.

categories:GunsSporting Goods

2328 impressions

212 views

Selling/trading an Enfield No.4 Mk I .303. Overall it's in very nice shape. Dated 1943, non numbers matching. Steel is all in nice shape throughout with light fading in the colour here and there. Stocks are in very nice shape throughout, normal bumps and marks here and there. 2 groove bore is excellent, bright and crisp. Comes with what appears to be a repro sling. Overall a very nice rifle. Looking for $1095 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

2685 impressions

278 views

Selling/trading a Savage No. 4 Mk I Enfield in .303. Overall it's in very nice shape. Dated 1942, non numbers matching. Wood stocks are in very nice shape, seem to have a gloss clear coat on them and show very well, a few normal dings/marks throughout. Steel is in nice shape as well, has faded to a nice patina. 2 grove bore is in excellent shape, bright and crisp. Sling loop no longer present on the butt stock. Comes topped with its original sights and one detachable magazine. Looking for $1095 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

2254 impressions

205 views

Selling/trading a Knight MK85 Stainless 50 cal. Overall it's in good shape. 24" barrel, takes 209 primers with the disc conversion caps. Steel is in good shape, shows some light freckling throughout. Some of the pieces of hardware have some rust on them. Bore is in good shape, could use a good scrubbing if anything. Comes with a set of 1" rings which also have some rust on them. Overall a good solid muzzleloader. With a good scrubbing will clean up well. Looking for $375 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

1607 impressions

164 views

Ideally looking for German or Japanese mk v wood and blued. Not interested in Vanguards

categories:GunsSporting Goods

3118 impressions

110 views

Selling/trading a few No. 1 Mk III Drill Purpose .303's. These are non fireable as they've had the chambers pinned through the action. I've got 4 of them available. All have been stripped of the factory grease and cleaned. Wood stocks are in good shape, normal bumps, bruises and marks throughout. All have DP stamps on the steel and wood as well as the white/red stripes. Great display pieces. As stated above, they are non fireable. These are still considered firearms and PAL will be verified upon purchase. Looking for $525 shipped each. Willing to work on price if purchasing more than one. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

1835 impressions

163 views

Selling/trading a Savage No. 4 Mk I. Overall it's in very nice shape. Has the early, less common cocking mechanism as seen in pictures. Stocks are in nice shape, shows normal finish loss throughout with light marks and dings. Steel has turned to a nice patina and shows well throughout. 2 groove bore is in very nice shape, good colour and crisp rifling. Has its original iron sights and will come with one detachable magazine. Looking for $1095 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

2126 impressions

169 views

Replace cracked, missing, and worn grips or safeguard your minty originals by swapping to a new pair that you're ok with taking a beating in the field. I am selling reproduction revolver grips for models of revolvers/handguns including antique and modern and can source plenty more if interested. I also have holsters for antiques available! Check my ads for more. Antiques were made before CNC machining, meaning there can be slight variation between different examples of the same model. Grips may be slightly oversize allowing them to be ground down to size, slightly undersize, or require minor adjustment of the interior face or grip peg hole to fit just the way you want. I can also get plenty of butt plates for shotguns and rifles. Inquire to see if I can help you. Also reach out if you need a leather holster to protect your revolver. Price starts at $100 per grip pair with shipping anywhere in Canada, discounts for bulk order possible. Current stock includes: Colt 1873 Single Action Army / Peacemaker ivory-like Colt 1877 Thunderer/Lightning .41 Webley Mark 1 (Mk I) for .455, .45 ACP, and .45 auto rim service revolver Webley Mark 2, Mark 3, Mark 4, Mark 5 (Mk II, Mk III, Mk IV, Mk V) for .455, .45 ACP, and .45 Auto rim service revolvers Smith & Wesson No. 3 New Model for .44 single action revolvers Smith & Wesson No. 3 Russian ivory-like for .44 Russian single action revolvers I can source most grips and butt plates for makes of pistols and long guns such as Beretta, Benelli, CZ, Colt, Forehand & Wadsworth, Harrington & Richardson (H&R), Hopkins & Allen, Ithaca, Iver Johnson, Luger, Marlin, Mauser, Pietta, Remington, Ruger, Springfield, Savage, Sig Sauer, Smith & Wesson, Stevens, Tokarev, Uberti, Walther, Webley, and more.

categories:GunsSporting Goods

32728 impressions

689 views

If you are looking for a reliable, sturdy, and protective holster for your collectible handguns, I can help. Don't go out into the bush or backcountry without a way to protect and safeguard your valuables! I have hand-made and custom fit holsters that work the following models, and more. Webley Mk 1-6, Webley WG, Smith & Wesson no. 3 variants, French MAS 1873 and 1874 models, Reichsrevolvers, Colt 1877 Thunderer, Colt 1878, Small and large frame Nagant types, Bodeo, Remington and Colt Cap & Ball Revolvers. Inquire with your model information and I'll do my best to match you with something that fits to your liking or money back after return. Prices range from $75-$150 I also have scarce period accurate Japanese Service Type 26 Shaped Top "Ham holsters" with removable shoulder strap and 12 round ammo pouch Designed for Japanese Type 26 revolver in 9mm/.38 cal And German Service Reichsrevolver M/1883 Holsters with 12 round ammo pouch designed for Reichsrevolver Model 1883 10.55 mm/.44 Russian Ships Canada wide. I don't like drama, and offer a money back guarantee of satisfaction.

categories:GunsSporting Goods

14434 impressions

567 views

Neerlandia Co-op Sportsman Centre - feature Gun Of The Week special! From JULY 21-26, 2025 check out: https://neerlandiacoop.com/product/browning-bar-mk3-243win-stalker-ns/ BROWNING BAR MK 3 STALKER 243 WIN • Semi-Automatic • 22" Hammer-Forged Barrel • 4 RD Magazine 15% OFF from JULY 21-26, 2025 Regular $1749.99 LOCATED AT: 3224 Twp Rd 615A, County of Barrhead, AB SHIPPING AVAILABLE ACROSS CANADA ** Consider Membership with Neerlandia Co-op: https://neerlandiacoop.com/membership/ **

categories:GunsSporting Goods

26986 impressions

602 views

NEW THROW LEVER FOR LEUPOLD VX5 & VX6 HD RIFLE SCOPES … MAKES A STIFF MAGNIFACTION ADJUSTMENT EASY TO OPERATE….…. Manufactured by MK Machining USA CALL OR TEXT 403 860 5800

categories:GunsSporting Goods

8747 impressions

482 views

The TMAG 30/5 AR/M4 GEN M3 is a highly reliable, translucent, 30-round magazine for STANAG-compatible weapons chambered in 5.56×45 NATO/.223 Remington. Molded from a durable translucent material with an olive drab hue, it provides shooters the ability to visibly verify various ammunition types and the current round count. Featuring ribbed front and rear straps for improved purchase during magazine changes, the sides are left smooth to enhance visibility. Like the rest of the GEN M3 family of magazines, the TMAG incorporates similar internal geometry which translates into unmatched reliability when firing. The four-way, anti-tilt follower is paired with a durable USGI-spec, stainless-steel spring with a painted coil, which maintains the “gas gauge” capability from the “Window” magazine product line. The magazine body is clearly marked to show approximate round counts when inserted in a magazine well, and the paint-pen dot matrix allows for custom markings to be applied by the shooter. The TMAG’s low-profile floor plate also allows for compatibility with the full line of PMAG® AR/M4 GEN M3 floor-plate accessories. The TMAG is optimized for Colt-spec AR15/M4 platforms, but modified internal and external geometry also permits operation with a range of other weapons such as the WK180C, HK® 416/MR556A1/M27 IAR, FN® SCAR™ MK 16/16S, and others. Made in the USA. Available for shipping only. Taxes will be added.

categories:GunsSporting Goods

17653 impressions

498 views

Collectable. Very good condition. Comes with 40 rounds. Would consider trades for a hunting rifle of a similar value. In Okotoks.

categories:GunsSporting Goods

7160 impressions

775 views

Looking to sell my rifle in perfect operating order, matching SN, all original. Some oxidation on brass butt plate. Will consider swap for good condition lever action 3030 rifle or similar. SOLD

categories:GunsSporting Goods

29215 impressions

3192 views