4) Savage 1899 Rear Sight (FT) & Elevator (98%) (Stamped Pat Pend) - $165.00 . 6) Savage 99 Rear Sight (Early FT) & Elevator (95%) - $135.00 . 7) Savage 99 Rear Sight (Later FT) & Elevator (95%) - $145.00 . 8) Savage 99 Rear Sight (Semi- Buckhorn) & Elevator (95%) - $165.00 . 9) Savage Folding Rear Sight & Elevator - $145.00 . 10) Savage Flat Top Rear Sight (Reproduction) & Elevator - $75.00 . 13) Savage 25B Windgage Rear Sight (some pitting) - $90.00 . 14) Savage Folding Rear Sight & Elevator - $145.00 . 16) Savage 99 Rear Sight Elevator - $40.00 . 17) Savage 1899 Rear Sight Fishhook Elevator - $40.00 . 20) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 . 21) 8-40 Pan Head Filler Screws (2) - Blue - $20.00 . 22) 3/8" DT Filler - Curved Top - $40.00 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:GunsSporting Goods

83015 impressions

4522 views

If this ad is up, then item is still available! Remington 14 1/2 (or 141) pump action 44 WCF (44-40 Win) for sale. Barrel Stamped with DCP (WWI BRITISH DOMINION OF CANADA PROOF). $1400 EMT(shipping) or cash(F2F pickup) Shipped via Canada Post at buyers expense within Canada only

categories:GunsSporting Goods

6723 impressions

386 views

Pre-WW1 British Pattern 1821 Canadian Artillery Officer's Sword – no Scabbard Savage and Lyman Montreal Sword This company name was used by the Montreal silversmiths Savage and Lyman between 1868-1878. The left side of the blade immediately in front of the guard Is marked Savage & Lyman Montreal Within the engraving on the left side is a Crown.  Believed to be indicative of Queen Victoria. The right side of the blade has a small brass insert which says PROOF.  Wilkinson Sword introduced these Proof Discs in 1844. In the engraving on the right side of the blade is the word ARTILLERY The guard is steel and has fish skin wire bound grips with most of the fish skin having been worn away.   Length of Sword – 40 1/2” Length of Grip including the Guard – 5 1/2” Blade Length – 34 1/2”   Savage & Lyman Montreal (or Savage & Lyman and Company) were manufacturers and suppliers of swords, known for military pattern swords like those for Canadian militia units (e.g., 1st Battalion Chasseurs Canadiens), marking them as producers/sellers, though like many firms, they likely had blades forged elsewhere (perhaps by specialists like J. Martin in Montreal) and then finished, hilted, proofed, and sold by Savage & Lyman in Montreal, a common practice for armsmakers then.  Key Points: Evidence of Manufacturing: Swords clearly marked "SAVAGE & LYMAN MONTREAL" exist in museum collections, showing they were a recognized name in arms. Role: They functioned as an arms dealer and supplier, customizing and selling weapons for Canadian military and militia. Production vs. Supply: While they might not have forged every single blade from raw steel in-house, they were responsible for the final product, including proofing and adding their own markings, as seen on a 1885 Chasseurs Canadiens sword. In short, they were a key player in the Montreal arms trade, making/selling quality military swords, even if blade forging was sometimes outsourced to other specialized smiths.    $500.00 Or Best Offer   Thanks,  Phil

categories:GunsSporting Goods

6979 impressions

197 views

Torkmag G-Block Conversion Kit Features: Compatible with all Mil Spec AR-15 Lowers No Modification to the lower necessary Duel Block System is held firmly in place with set screws (Included) Use with factory Glock Mags, Torkmag 9mm Magazine and .40 S&W Cal Glock Magazines Pickup GTA Ship on buyer

categories:GunsSporting Goods

3825 impressions

140 views

Brand new TAPCO AR SAW style pistol grip w/ storage compartment Combo with Tapco Quad-Rail AR Carbine Handguard for $40 Pickup GTA Ship on buyer

categories:GunsSporting Goods

2987 impressions

185 views

$10 Each *Glock factory OEM Magazine Speed Loaders (not for .45 ACP) *Simple to use. *Compatible Glock Magazine Calibers: 9mm / .40 / .357 / .380 Auto & .45 GAP *Made from durable polymer *Maximize your time and at the range, spend less time loading and more time shooting.

categories:GunsSporting Goods

27054 impressions

656 views

1) Marlin S-25 Rear Sight & Elevator  -  $125.00  2) Marlin S-25 Rear Sight & Elevator - Stepped  -  $145.00 3) Marlin 39 (post 72) Folding Rear Sight & Elevator  -  $170.00 4) Marlin Front Sight Ramp (0.7" C-C) with Screws  -  $85.00 5) Marlin Front Sight Ramp Insert - (298")  -  $75.00 6) Marlin Hood (1972 to Present Day)  -  $60.00 7) Marlin Hood (pre 1972 Rifles)  -  $45.00 8) Marlin Bullseye Stock Inlay  -  $35.00 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45 10) 8-40 Pan Head Filler Screws (2) - Blue  -  $20.00 11) 6-48 Pan Head Filler Screws (2) - Blue  -  $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

50542 impressions

1622 views

The next Historical Arms Collectors Society of BC (HACS) gun show is Jan 18th 2026 at Evergreen Hall. 9291 Corbould St. Chilliwack, BC. 9:AM to 3:PM Admission is $10. 12 & under get in free when accompanied by an adult. Kiwanis Club of Sardis will be serving beverages & hot dogs from the hall concession. your support is appreciated! 2026 annual HACS memberships will be available at the door. cost is $40 for the year. HACS members get in free to all shows and are allowed in 1/2 hour before the public. For more information about HACS or for table rentals check our website: www.hacsbc.ca 2026 show dates: January 18th at Evergreen Hall. 9291 Corbould St. Chilliwack, BC. 9AM - 3PM. March 21st & 22nd Annual two day show at heritage Park, 44140 Luckakuck Way. Chilliwack, BC. (pls note date correction) Sat 9AM - 5PM. Sun 9AM - 3PM. May 31st at Evergreen hall. 9AM - 3PM September 20th at Evergreen hall. 9AM - 3PM. November 14th & 15th. two day show at Evergreen hall. Sat 9AM - 5PM. Sun 9AM - 3PM.

categories:GunsSporting Goods

45481 impressions

6056 views

brand new canuck enforcer2 folding 12 gauge shotgun only 4 rounds out it 12" barrel. 3 chokes. barrel extension extra 12" spring assist pump shotgun PAL / cfo # check shipping $40

categories:GunsSporting Goods

618 impressions

66 views

Selling NF NX8, bought couple weeks ago new, had on Rifle for 40 rounds at the range. Literally brand new.  Not my type of Scope. Liked the compact size, and the Reticle. But I’m not super happy with it. If it sells great, if not I keep it, still great scope.  Comes with Vortex medium rings and Bubble level. NF Scope caps included. Original Box available.  Location Valleyview. Could meet in Grande Prairie as well one of the days.  Shipping available as well, but would prefer F2F Sell or trade for a Mark 5, Kahles, Steiner. Would add cash for the right one on top. 

categories:GunsSporting Goods

6905 impressions

371 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

14121 impressions

354 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

14562 impressions

292 views

Howdy Townpost! I've gotten my hands on some stubby steelies! These are new production Yugoslavian military patterned magazines made in Croatia. These are well made and the milling was done well too. These are all properly pinned to 5 rounds. And are nice for hunting with a shorter mag or hauling it around with a shorter and lighter mag when compared to standard a 5/30 rounder. These magazines will also work with an AK magazine coupler (I have these for sale for $20). Which for an SKS-D some plastic on the coupler must be removed first. The M10X should work with a coupler without issues the same goes for the WK-181 and modded mags in the Type-81. These can be modified to fit into a Type-81. I also have modded mags for sale which are $55 each. I am the only seller who has these Croatian 5/10's in Canada. Even the crappy Gen.1 KCI 5/10's are out of stock practically everywhere in Canada. This is a limited run, so don't miss out. The mags are $40 each. The mags will come in a plastic bag in preserving oil that can be easily cleaned up with any degreaser or simply hot water and dish soap in your kitchen sink with a quick scrub and then dried. It's a good idea too to apply a light coat of gun oil. A single drop rubbed across the entire mag is enough. These mags will fit in the SKS-D, the M10X series, and they might require some hand fitting to work in the WK-181, since Kodiak designed those things with odd magwell dimensions with PMAGS in mind. In all likelihood though, they will work out of the box for you. The magazines are located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $18.89 flat rate. If you order more than 6 mags, shipping will be $21. If you want to order a large amount 10+ shipping will definitely be more.

categories:GunsSporting Goods

57988 impressions

1370 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

16252 impressions

486 views

Steiner GS3 Game Sensing Rifle Scope, 2-10x42mm,E3 Reticle (not illuminated), 2nd Focal Plane,30mm Main Tube Diameter,1/4 MOA Impact Point Correction,40 MOA Windage / 60 MOA Elevation Ranges Waterproof / Fogproof / Sock Resistant.Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Please send message to: medal1958@gmail.com

categories:GunsSporting Goods

8173 impressions

374 views

1) Marlin 336 - 1894 - 1895 Folding Rear Sight & Elevator - $170 3) Marlin Front Sight Ramp (0.7" C-C) with Screws  -  $85.00 4) Marlin Front Sight Ramp (1.0" C-C) with Screws  -  $85.00 5) Marlin 336 Front Sight Ramp - Sight Insert - (298") - $75 6) Marlin 336 Hood (1972 to Present Day) - $60 7) Marlin 336 Hood (pre 1972 Rifles) - $45 8) Marlin S-27 Rear Sight & Elevator  - $155 9) Marlin Rocky Mountain Rear Sight with Elevator - $295 10) Marlin Fishhook Elevator - $35 11) Marlin 336 - 1894 Front Barrel Band Screw (pre 84) - $45 12) Marlin 336 - 1894 Front Barrel Band Screw (post 84) - $45 13) Marlin 336 - 1894 Rear Barrel Band Screw - $45 14) Marlin Bullseye Stock Inlay  -  $35.00 15) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 16) 8-40 Pan Head Filler Screws (2) - Blue  -  $20.00 17) 6-48 Pan Head Filler Screws (2) - Blue  -  $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

74653 impressions

1986 views

1) Sako - Tikka Rear Sight - (0.56" / 9/16" C-C) - $195.00 2) Sako - Tikka - Blade Rear Sight - 1 screw - $225.00 3) Sako - Tikka - Front Sight w/ Sight Insert & Screws (1.2" / 30mm C-C) - $275.00 4) Sako - Tikka - Front Sight Ramp w/ Sight Insert, Hood & Screws (1.2" / 30mm C-C) - $350.00 5) Sako Front Sight Ramp (2 screws) - without Sight Insert (0.75" C-C) - $75.00 6) Sako 85 Front Sight Hood - $85.00 7) Sako / Browning Front Sight Hood - $85.00 8) Sako AIII - Finwolf Front Sight Hood - $85.00 10) 6-48 Filler Screws (4) - Blue - $20.00 11) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 12) 6-48 Filler Screws (4) - Stainless - $20.00 13) 8-40 Pan Head Filler Screws (2) - $20.00 14) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

95308 impressions

3649 views

-Athlon Btr  10 - 40 X 56mm GEN2 Long Range Scope, Brand New in Box. SFP, with zero stop,  Non illumination reticle -Cadex Strike Nuke chassis Od green -Tactical Solutions comp -Anarchy outdoors Extended Mag release -5 - 10 round magazines -Anarchy Outdoors extended bolt handle -Anarchy Outdoors oversized     bolt knob -MDT 20 Moa rail -Cadex 9 slot picatinny mlok rail for bipod -Cadex bag rider And all original parts included (Including original stock) Extra Anarchy Outdoors Extended bolt arm for T1x (Stainless) Must have PAL Local sale prefered

categories:GunsSporting Goods

6379 impressions

478 views

For sale (Open to Trades) — Remington XCR II Key details Condition: Very good / fully functional — no issues. Receiver stamped 721. Re-barreled by first owner with a stainless steel barrel. Stock bedded for improved accuracy and consistency. Action: Remington (renowned reliability). Finish: XCR II features TriNitride coating — an extremely durable, high-performance surface treatment. Performance Fired at Genesee Range (Alberta): was able to hit steel at 500 m using a Bushnell 3–12×40 scope and Federal 150 gr / 180 gr ammunition. Functions reliably and as intended. Sale terms Local sale preferred. Shipping at buyer’s expense (buyer is responsible for transfer compliance). Open to trades — especially rifles in other calibres (this is surplus to my need) Notes XCR = Xtreme Condition Rifle.

categories:GunsSporting Goods

47401 impressions

2817 views

For Sale - Lee Precision 44-40 (44 WCF) factory crimp die $40 - firm 1 set available No trades or offers Brand new in box - Contains: -factory crimp die -instructions -black box EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense. Small package/tracked, all other provinces - $22 (small box) Text, email, or leave message / unable to answer calls in remote areas. If this ad is still up then item is available.

categories:GunsSporting Goods

14550 impressions

554 views

For Sale - Lee Precision 30/40 Krag steel full length sizing 3 die set - crimp die is included $80 - firm 1 set available Brand new in box - Contains: -full length sizing die -expanding die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box The resizing die is steel and is not self lubricating. Payment by EMT(shipped) or cash(pickup) - Pick up available by appointment only (cash), house drop box or shipped at buyers expense within Canada only by Canada Post. Small package/tracked, all provinces - $22 (small box) Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is up then item is still available.

categories:GunsSporting Goods

14854 impressions

648 views