Brand new Ultra light Weighs only 300 g Fully adjustable to fit different sizes of body shapes Material: Cordura fabric Can be loaded with both Front & Rear 10"*12" Body Armor Plates Note: Just the carrier without any plates. It can hold our company's NIJ III and NIJ IIIA plates but maybe can not hold other ones because the other ones could be too thick. Made in China

categories:Sporting GoodsGuns

3301 impressions

626 views

Brand new Caliber: 22lr Capacity: 10 rds Fits: .22 LR Conversion Kit for GLOCK 20/21 Made in USA

categories:Sporting GoodsGuns

8783 impressions

531 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 3 Slots Max overall length of 1.6″.

categories:Sporting GoodsGuns

2048 impressions

413 views

Brand new The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in USA

categories:Sporting GoodsGuns

2344 impressions

405 views

Brand new Fits Kriss Vector 22 SBR Caliber: .22 LR Capacity: 10/30 rds

categories:Sporting GoodsGuns

7765 impressions

590 views

Brand new Five-Position Forend Pistol Grip Ergonomic Design Textured Grip Gives You Extra Support & Stability When Shooting Installs Onto a Standard Picatinny Rail (Not Included) DuPont Extreme Temperature Glass Reinforced Polymer Matte Black Fits: Standard Picatinny rails Limited Lifetime Warranty Made in USA

categories:Sporting GoodsGuns

2545 impressions

459 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1 series shotguns, adding modularity, comfort, and customizability to the mossberg platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. Not compatible with the optional Mossberg heatshield. Removal is required before use. Not compatible with the 590M shotgun.

categories:Sporting GoodsGuns

6481 impressions

569 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Remington 870 series shotguns, adding modularity, comfort, and customizability to the 870 platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. The MOE M-LOK Forend is not compatible with the Remington 870 Super Mag.

categories:Sporting GoodsGuns

6134 impressions

552 views

Brand new The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Remington 870 12ga shotgun. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories, the SGA 870 brings Magpul design and engineering to another classic American firearm.

categories:Sporting GoodsGuns

8429 impressions

685 views

Brand new The UpLULA® loader is a military-grade, pocket-size, universal pistol magazine loader and unloader designed to load and unload virtually all* 9mm Luger up to . 45ACP single and double stack magazines of all manufacturers. It also loads most . 380ACP single and double-stack mags, and 1911’s mags.

categories:Sporting GoodsGuns

5325 impressions

387 views

Brand new All steel construction Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail Windage adjustable with low-profile knob – no tools required Positive detents in both the up and down positions Standard AR height over bore when deployed, 45 deg. offset right-hand side NOTE: Only compatible with MBUS Pro OFFSET Front sight MAG525.

categories:Guns

2659 impressions

378 views

Brand new  For Glock 19 Gen 3 MFG # RA- RA50G201T Made in USA

categories:Guns

3590 impressions

471 views

New ship poste Canada

categories:Guns

1891 impressions

314 views

Brand new New SureFire Turbo Series handgun WeaponLight generates a tightly focused, 66,000-candela beam pattern Highly visible, integrated 5-milliwatt laser—available in red or green—helps you get on target quickly and accurately without requiring the use of your gun's iron sights Mounts securely to Universal rail-equipped or Picatinny rail-equipped handguns or long guns The Turbo Series version of our X400 handgun WeaponLight delivers a stunning 66,000 candela of intense, tightly focused, far-reaching white light with a hot spot that is tremendously effective, plus a highly visible laser—available in red or green—to help the user get on target quickly and accurately. You can count on the X400T-A to help you positively identify threats at extreme distances while also providing ample spill light to help you maintain situational awareness, and you can trust its laser to provide crucial visual guidance without acquiring your sights if you’re forced to respond from a non-standard shooting position. Ambidextrous switching provides one-finger control of momentary-on or constant-on activation. Its rugged, aerospace aluminum body is Mil-Spec hard anodized for scratch and corrosion resistance and seal Precision-engineered Turbo reflector delivers 66,000 candela of tightly-focused white light; the farthest-reaching beam of any SureFire X-Series handgun WeaponLight Choose the <5 mW / 635-nanometer red laser or <5 mW / 515-nanometer green laser. Both are visible to the human eye for rapid target acquisition from nonstandard shooting positions Integral ambidextrous momentary- and constant-on switching provides easy activation Attaches securely to both Universal and Picatinny accessory rails Weatherproof O-ring and gasket sealing ensure durability in rainy conditions High-strength aerospace aluminum body is Mil-Spec hard anodized for extreme durability Accepts optional pressure-activated DG and XT remote switches for precision control without altering grip on weaponke it weatherproof. The X400T-A delivers a standard of excellence you can trust with your life.

categories:Guns

4069 impressions

409 views

1 set of brand new, never used, 38-40 A-Zoom snap caps. Great for practise, safe for dry fire. Hard to find in 38-40 WIN. Comes with 6 cartridges. will ship on buyers dime. $40 message if interested

categories:Sporting GoodsGuns

2465 impressions

474 views

Brand new The MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.  With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in USA

categories:Guns

2698 impressions

390 views

Brand new Mount Base Part Number: 1301 Recon (0 MOA) 1.5" The AD-RECON mount features the Patented QD Auto Lock™ Lever system which has the following advantages: Does not require proprietary tools for adjustment. Can be adjusted with your finger or a flat blade screwdriver. Lever can be configured to lock to the front or the rear. Superior clamping surface to insure maximum rail engagement. The AD-RECON mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish. Precision machined from 6061 T6 Aluminum. Hard coat anodized for a lifetime of performance. Fully adjustable to fit both in spec and out of spec rail systems. American Defense MFG, LLC. products feature a lifetime warranty. Features the Patented QD Auto Lock Lever system. Made in USA

categories:Sporting GoodsGuns

3833 impressions

545 views

Brand New Mark II FVXP in 22LR, with factory installed scope. 40 rounds down the flute just to sight it in. Bought for my wife in hopes that she would finally enjoy the sport as much as me. Not a chance lol. I have other 22s, so this one is going back out the door. $400 shipped, and will include accessories as pictured: bipod, scope caps, chamber flag, magazine, trigger lock.

categories:Guns

2364 impressions

333 views

Brand new All steel construction Steel, rectangular sight post selectable between Match and Standard widths   —.040” Match width for increased precision   —.060” Standard width for maximum visibility Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks Elevation adjustment knob – no tools required Positive detents in both the up and down positions as well as on the elevation knob Standard AR height over bore when deployed, 45 deg. offset right-hand side NOTE:  All MBUS Pro Front Sights now come factory-equipped with the Enhanced Front Sight Post. There is no need to order one separately unless you are retrofitting an older MBUS Pro front sight. Enhanced Front Site Posts are not compatible with standard MBUS polymer sights. Only compatible with MBUS Pro OFFSET Rear sight MAG526.

categories:Guns

2831 impressions

420 views

Brand new Compatible with Benelli M4 and clones Knurled texture for enhanced grip Constructed from 4140 Steel Made in the USA with a lifetime warranty

categories:Guns

7214 impressions

622 views

Brand new The M-LOK QD Sling Mount provides an alternate attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning. Mounts to all M-LOK compatible hand guards and forends Accepts any push-button QD swivel as well as the Magpul QDM Machined from Mil-Spec annodized aluminum for durability and light weight Beveled edges reduce snagging Anti-rotation design prevents swivels from spinning

categories:Guns

2732 impressions

461 views