Brand new Mount Base Part Number: 1301 Recon (0 MOA) 1.5" The AD-RECON mount features the Patented QD Auto Lock™ Lever system which has the following advantages: Does not require proprietary tools for adjustment. Can be adjusted with your finger or a flat blade screwdriver. Lever can be configured to lock to the front or the rear. Superior clamping surface to insure maximum rail engagement. The AD-RECON mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish. Precision machined from 6061 T6 Aluminum. Hard coat anodized for a lifetime of performance. Fully adjustable to fit both in spec and out of spec rail systems. American Defense MFG, LLC. products feature a lifetime warranty. Features the Patented QD Auto Lock Lever system. Made in USA

categories:Sporting GoodsGuns

3836 impressions

545 views

Brand New Mark II FVXP in 22LR, with factory installed scope. 40 rounds down the flute just to sight it in. Bought for my wife in hopes that she would finally enjoy the sport as much as me. Not a chance lol. I have other 22s, so this one is going back out the door. $400 shipped, and will include accessories as pictured: bipod, scope caps, chamber flag, magazine, trigger lock.

categories:Guns

2364 impressions

333 views

Brand new All steel construction Steel, rectangular sight post selectable between Match and Standard widths   —.040” Match width for increased precision   —.060” Standard width for maximum visibility Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks Elevation adjustment knob – no tools required Positive detents in both the up and down positions as well as on the elevation knob Standard AR height over bore when deployed, 45 deg. offset right-hand side NOTE:  All MBUS Pro Front Sights now come factory-equipped with the Enhanced Front Sight Post. There is no need to order one separately unless you are retrofitting an older MBUS Pro front sight. Enhanced Front Site Posts are not compatible with standard MBUS polymer sights. Only compatible with MBUS Pro OFFSET Rear sight MAG526.

categories:Guns

2832 impressions

420 views

Brand new Compatible with Benelli M4 and clones Knurled texture for enhanced grip Constructed from 4140 Steel Made in the USA with a lifetime warranty

categories:Guns

7218 impressions

622 views

Brand new The M-LOK QD Sling Mount provides an alternate attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning. Mounts to all M-LOK compatible hand guards and forends Accepts any push-button QD swivel as well as the Magpul QDM Machined from Mil-Spec annodized aluminum for durability and light weight Beveled edges reduce snagging Anti-rotation design prevents swivels from spinning

categories:Guns

2732 impressions

461 views

Please text anytime 6476871484. Brand new. Made in USA high quality adapter. about 4 inches long. 12GA to 410GA Shotgun Adapter This will allow 12GA shotgun to shoot .410ga ammo. Designed for break-open style guns Precision machined made in USA This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a .410ga ammunition. This adapter is precision machined to the OD specifications of a 2 3/4 12GA shell plus and extra one and a half inch in front to make this adapter 4 inches long in total. It will easily fit into your break open shotgun barrel and accept any 410ga ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This is a smooth bore adapter. The cartridge side is precision CNC machined to the exact chamber dimensions (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 410ga ammunition. Surprisingly accurate!

categories:Sporting GoodsGuns

12743 impressions

1286 views

Brand new Keeps five 12 gauge shotguns rounds in easy-access position Compatible with any ATI top-folding or fill length wood or synthetic stock Made in USA

categories:Guns

3349 impressions

330 views

Brand new The M-LOK Paraclip Sling Mount is a steel clip-in sling mount for M-LOK compatible systems. It is constructed of high-grade, precision cast steel and has an extremely durable Melonite finish. With a low-profile and snag-free design it fits a wide range of clips, including the Magpul Paraclip. For use with M-LOK compatible hand guards and forends Accepts clip-style sling attachments such as our own Paraclip Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Length, Max: 1.8" Height, Max: 0.5" Weight, w/ Hardware: 1.0 oz.

categories:Guns

2476 impressions

405 views

Brand new Heavy-Duty quick-disconnect (QD) sling swivel Push-Button quick-detach function for 1-1/4" webbing Rugged manganese-phosphate finished steel construction Compatible with standard QD sling attachment points The Magpul QD Sling Swivel keeps your rifle sling rock steady when you depend on it most. This heavy duty quick-disconnect tactical rifle sling swivel features a push-button quick-detach function specifically for 1-1/4" webbed strapping. The rugged manganese-phosphate finished stainless steel construction lets you know it's ready to work as hard as you do. The Magpul QD Sling Swivel works perfectly with standard QD tactical sling attachment points.

categories:Guns

2538 impressions

390 views

Brand new Designed for use with all M-LOK compatible hand guards and forends. The 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. The M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 11 usable slots and a max overall length of 4.9". Mounts directly to M-LOK compatible systems. Multi-directional mounting Intermediate spacing option Lightweight reinforced polymer Cammed T-nuts Recoil / impact mitigation lugs Made in USA

categories:Guns

2817 impressions

375 views

Brand new Developed to improve precision and accuracy with any style or caliber of weapon, the Trijicon RMR (Ruggedized Miniature Reflex) Type 2 is designed to be as durable as the legendary ACOG. The RM01 is an LED sight powered by a standard CR2032 battery. Housed in rugged forged aluminum, the RMR Type 2 is extremely tough yet lightweight. New easy-to-use adjusters with audible clicks allow for quick windage and elevation adjustments. The new Trijicon RMR Type 2 is tougher than any alternative and suitable for military, law enforcement and hunting applications. Magnification:1x Bullet Drop Compensator: No Length: (in)45mm Weight: (oz)1.2 oz w/Battery Illumination Source: LED Reticle Pattern: 3.25 MOA Dot Day Reticle Color: Red Night Reticle Color: Red Bindon Aiming Concept: No Adjustment @ 100 yards (clicks/in): 1 Housing Material: Forged Aluminum Batteries: 1 CR2032 Lithium Battery Battery LifeUp to 2 years of typical use*, up to 5 years in dark storage. *When used at 70ºF (21ºC). Extreme temperatures (high or low) will affect lithium battery performance.

categories:Guns

5437 impressions

528 views

Brand new  For Glock 19 Gen 4 MFG # RA-RA50G211S Made in USA

categories:Guns

4021 impressions

416 views

Brand new  For Glock 17 Gen 4 MFG # RA- RA50G111T Made in USA

categories:Guns

3883 impressions

464 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 9 Slots Max overall length of 4.1″.

categories:Guns

2114 impressions

350 views

Brand new Can be Fired in Opened or Folded Position Quick Release Button Allows Stock to Lock in Folded/Unfolded Position Textured Pistol Grip Ambidextrous Pre-Drilled to Accept Shotgun Shell Holder Easy Installation Sling Swivel Stud Included DuPont® Extreme Temperature Glass Reinforced Polymer Stock Limited Lifetime Warranty Made in USA Fits Most 12 GA Maverick 88, Mossberg 500/535/590/835, Remington 870 and Winchester 1200/1300 Shotguns

categories:Guns

14237 impressions

739 views

Brand new Includes One Magazine, Speed loader and carry case Fits Glock 20/21 GEN 4 Features Adjustable Sights The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. Last Round Lock Open The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol. Internal Firing Pin Safety Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. Finish All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. 10 Second Installation Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. One Year Factory Direct Warranty Warranty covers any defects in materials or workmanship. (Excluding S&H Charges). Note: Do not use Stinger or any other hyper velocity ammo Do not use Remington Thunderbolts Made in USA

categories:Guns

16424 impressions

1400 views

Brand new This Magazine Well Insert Assembly is designed to work exclusively with the Ruger PC Carbine. It accepts all Glock 9mm magazines. The flush-fit design is made from rugged, glass-filled polymer material for strength and durability. Quick and easy installation; instructions included with product. The 5/32″ hex wrench included with PC Carbine is required for installation.

categories:Guns

7088 impressions

445 views

Brand new The MBUS Rear Sight is adjustable for windage and fits 1913 Picatinny-railed weapons, specifically the AR15/M16 platform. Spring-loaded, folding back-up sight Same plane dual flip apertures Lightweight reinforced polymer construction All mounting hardware included Please note that MBUS sights are optimized for 5.56mm and 7.62mm NATO weapons. 9mm/45 and other pistol caliber weapons may not be fully compatible due to bullet drop at extended range.

categories:Guns

4982 impressions

388 views

Brand new Fits: Norinco NP17 Caliber: 9mm Capacity: 8 Rounds Material: Steel and Polymer  Made in China

categories:Guns

5700 impressions

384 views

Brand new The next evolution in our MBUS (Magpul Back-Up Sight) line The MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system.

categories:Guns

2549 impressions

463 views

Brand new The MBUS Rear Sight is a folding, spring-loaded flip-up sight. Constructed from impact resistant polymer, the MBUS sight is both lightweight and durable. It is compatible with all Picatinny rails, and, having been specifically tailored with the AR platform in mind, has the same height-over-bore as standard A2 iron sights. Two apertures are available for use, one large and one small, and both allow the sight to be folded in position. Can be adjusted for windage with a detent knob.

categories:Guns

2569 impressions

373 views