Torkmag G-Block Conversion Kit Features: Compatible with all Mil Spec AR-15 Lowers No Modification to the lower necessary Duel Block System is held firmly in place with set screws (Included) Use with factory Glock Mags, Torkmag 9mm Magazine and .40 S&W Cal Glock Magazines Pickup GTA Ship on buyer

categories:GunsSporting Goods

2175 impressions

105 views

1) Marlin 336 - 1894 - 1895 Folding Rear Sight & Elevator - $170 3) Marlin Front Sight Ramp (0.7" C-C) with Screws  -  $85.00 4) Marlin Front Sight Ramp (1.0" C-C) with Screws  -  $85.00 5) Marlin 336 Front Sight Ramp - Sight Insert - (298") - $75 6) Marlin 336 Hood (1972 to Present Day) - $60 7) Marlin 336 Hood (pre 1972 Rifles) - $45 8) Marlin S-27 Rear Sight & Elevator  - $155 9) Marlin Rocky Mountain Rear Sight with Elevator - $295 10) Marlin Fishhook Elevator - $35 11) Marlin 336 - 1894 Front Barrel Band Screw (pre 84) - $45 12) Marlin 336 - 1894 Front Barrel Band Screw (post 84) - $45 13) Marlin 336 - 1894 Rear Barrel Band Screw - $45 14) Marlin Bullseye Stock Inlay  -  $35.00 15) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 16) 8-40 Pan Head Filler Screws (2) - Blue  -  $20.00 17) 6-48 Pan Head Filler Screws (2) - Blue  -  $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

71682 impressions

1912 views

Howdy Townpost! I've gotten my hands on some stubby steelies! These are new production Yugoslavian military patterned magazines made in Croatia. These are well made and the milling was done well too. These are all properly pinned to 5 rounds. And are nice for hunting with a shorter mag or hauling it around with a shorter and lighter mag when compared to standard a 5/30 rounder. These magazines will also work with an AK magazine coupler (I have these for sale for $20). Which for an SKS-D some plastic on the coupler must be removed first. The M10X should work with a coupler without issues the same goes for the WK-181 and modded mags in the Type-81. These can be modified to fit into a Type-81. I also have modded mags for sale which are $55 each. I am the only seller who has these Croatian 5/10's in Canada. Even the crappy Gen.1 KCI 5/10's are out of stock practically everywhere in Canada. This is a limited run, so don't miss out. The mags are $40 each. The mags will come in a plastic bag in preserving oil that can be easily cleaned up with any degreaser or simply hot water and dish soap in your kitchen sink with a quick scrub and then dried. It's a good idea too to apply a light coat of gun oil. A single drop rubbed across the entire mag is enough. These mags will fit in the SKS-D, the M10X series, and they might require some hand fitting to work in the WK-181, since Kodiak designed those things with odd magwell dimensions with PMAGS in mind. In all likelihood though, they will work out of the box for you. The magazines are located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $18.89 flat rate. If you order more than 6 mags, shipping will be $21. If you want to order a large amount 10+ shipping will definitely be more.

categories:GunsSporting Goods

53797 impressions

1309 views

Brand-new Henry Lever Action Supreme in .223 Rem/5.56 NATO (model H023-223), the slick modern lever gun that feeds from any AR-15 magazine. This carbine runs an 18-inch free-floated barrel with a multi-lug rotary-locking bolt for rock-solid lock-up, a user-adjustable match trigger, fully adjustable rear sights, and a threaded muzzle. No trades, price is firm, PAL required and will be verified before transfer. Prefer FTF deals in Edmonton but can ship at buyers cost.

categories:GunsSporting Goods

38591 impressions

2630 views

Ruger AmericRuger American Ranch Rifle, 16.12 Cold Hammer Forge Barrel, 5.56 NATO [36928]​ Details Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user adjustable between 3 and 5 pounds, allowing shooters to make that perfect shot. Ergonomic, lightweight synthetic stock designed for quick, easy handling blends a classic look with modern forend contouring and grip serrations. Soft rubber buttpad is crafted for maximum recoil reduction. The one-piece, three-lug bolt with 70° throw provides ample scope clearance and utilizes a full diameter bolt body and dual cocking cams for smooth, easy cycling from the shoulder. Patented Power Bedding®, integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy. Factory-installed, one-piece Picatinny scope base. Offers minute-of-angle accuracy that can make every hunt a success. Compact, threaded barrel with factory-installed thread protector is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity. The visible, accessible and easy-to-actuatetang safetyprovides instant security. Also includes: one magazine; sling swivel studs. SPECS​ StockFlat Dark Earth Synthetic FeatureStandard SightsNone - Scope Rail Installed Barrel Length16.12" MaterialAlloy Steel Capacity10 MagazineAR-Style Twist1:8" RH FinishMatte Black Weight6.1lb. Thread Pattern1/2"-28 Overall Length36" Length of Pull13.75" Grooves5 Bought new from RDSC. Maybe 15 round through it, excellent condition. Topped with a VX-1 3-9 x 40 and Talley scope rings I am in Red Deer if you want to get some hands on before purchasing. I am always interested in tradesan Ranch Rifle, 16.12 Cold Hammer Forge Barrel, 5.56 NATO [36928]​

categories:GunsSporting Goods

11214 impressions

1059 views

CZ Branded Pistol Cleaning Kit. Compact (15 x 9 x 3.5 cm) semi-rigid case with MOLLE on the back Threaded cable Cable attachment - wiper Plastic brush Oiler with Interflon oil Brass brush Set of textile squares $15 per, multiple available.

categories:GunsSporting Goods

26723 impressions

736 views

Please read entire ad! Prices below are not negotiable!  No trades or offers! Prices and quantities are as follows for parts: Bolt, Chinese Type 56, complete w/floating firing pin, extractor, etc - SOLD Bolt, Chinese Type 56, stripped - $35 Dust cover, Chinese unmarked - $40 (1 available) Long Recoil spring, complete - SOLD OUT Short spring - SOLD OUT Take down latch, Russian - $10 Magazine, internal 10rd pinned to 5, Chinese - $50 (2 available) Spike Bayonet, complete - $65 (3 available with spike, bolt, spring & handle – new condition). Ammo bandolero pouch, Chinese - $25 Cleaning rod, Russian - $25 Cleaning rod, Chinese/NcStar - $15 Front sight base w/bayonet lug (with sight pin & block, no mounting pins included for front sight) - $60 Gas tube handguard, black molded plastic (Tapco perhaps?) - $25 Gas port reamer (carbon) cleaner, gas chamber - $15 (3 available) Oil bottle, square green plastic - $3 Oil bottle, steel (round) - $6 (2 available) Oil bottle(steel), pouch - $4 Ammo pouch, Russian - $10 (2 available) 10rd stripper clips, Czech made - $3 ea (6 available) These are the only parts I have... I have no trigger groups, gas tubes, stocks, other springs, slings, barreled actions, recoil lug bolts, spring loaded bolts, rear sights or parts, muzzle brakes or bladed bayonets available. No parting out pieces of the magazines, bayonet units or receiver bolts...you purchase the whole unit. If it’s not listed above then it’s not available.  All of you know how hard it is to find SKS parts nowadays... this is it! Items and pictures will be removed once parts have been sold...items will not be “saved/on hold/held ” unless paid for in full, no exceptions! Items are sold on a first come basis w/ payment in full.  Please don’t ask about the certain serial numbers on the mags...they are either Chinese or Russian only. Shipping available – Items combined to ship / I ship within Canada only. Ship costs starts at $20 Payment by EMT (shipped) or cash (F2F pickup)

categories:GunsSporting Goods

34467 impressions

1175 views

The finest .338 I ever shot or bought. Originally a Kimber Montana. The barrel is trimmed to 23” and I have added an aftermarket titanium bolt handle. I also put her in a Pendleton composite stock with a 14.75” length of pull. This also adds bottom metal so it has kimber floor plate and mag box and you gain the ability to unload out the bottom. It’s also a slimmer stock so it doesn’t feel pregnant around the mag well like the 8400 montanas did. It feels slim, carries like a dream and recoils straight back. I found the recoil to be much less than any other .338 I owned in spite of its light weight. In other words, don’t be afraid of this one, if you can handle a .338 at 9-10lbs you can handle this one. Total scoped weight with a 2.5-8x36 Leupold was 6lbs 15 ounces. I’m selling without the scope but it will come with the tally rings. This rifle is very accurate and I shot many one hole, three shot groups. Will be sold face to face in penhold. I’m listing this one with photos from when I put it into storage and there is lanolin grease visible on the steel. My brother has since cleaned it up and has it in his safe but I don’t have current, clear pics of it without the grease on it so you’re going to have to look past that.

categories:GunsSporting Goods

1388 impressions

137 views

Neerlandia Co-op Sportsman Centre - feature Gun Of The Week special! From DECEMBER 22-27, 2025 check out: https://neerlandiacoop.com/product/ruger-243win-american-predator-green-22in-6972/ RUGER AMERICAN PREDATOR 243 WIN (Product # 7462328) 22" Threaded Barrel 4 RD Magazine Adjustable Trigger 15% OFF from DECEMBER 22-27, 2025 Regular $629.99 LOCATED AT: 3224 Twp Rd 615A, County of Barrhead, AB SHIPPING AVAILABLE ACROSS CANADA Consider Membership with Neerlandia Co-op: https://neerlandiacoop.com/membership/

categories:GunsSporting Goods

37093 impressions

511 views

Brand new Non-restricted Caliber: .22LR Capacity: 5 Action: Bolt Action Safety: Two-Position Manual Safety Trigger: Adjustable Barrel: 20" Cold hammer forged Sights: N/A Stock: Turkish Walnut Thread Pitch: 1/2x20 UNF Length of Pull: 14"-15" Overall Length: 40" Coming with: 1 magazine Made in CZ

categories:GunsSporting Goods

1780 impressions

78 views

I picked this up a while ago and have never used it. It was going to be my bug out gun but life changes and i need to downsize my collection. There is some pitting on the receiver. Bubbad metal work to fit the mag. Rifling looks good. Wartak skar sd-r scope rail. And AR magwell adapter. There is a bit of finish work that needs to be done. The ammo stovepipes unless you put a shim behind the mag then it cycles fine. Might be an easy fix if you have the right tools. Topped with a Burris fullfield 3-9x40 at the moment. $1500 for the rifle, magwell, rail and scope. 1500rd crate of Chinese corrosive. extra $500. Not selling ammo unless it goes with the rifle or the rifle sells first. Might take a partial trade in quality bulk 308 ammo or a 22lr in Henry, ruger, or savage. Must have a valid pal

categories:GunsSporting Goods

38163 impressions

3216 views

Here’s a list of my airsoft gear for sale: - Trigger (grey): $20 - Green pouch bag: $20 - Gloves: $10 - ICS Airsoft Glock (includes HPA): $550 (offer: $500, no lower) - Flashlight mount: $80 (offer: $50) - Valken rentals: $5 - Hi Capa 5.1 aluminum frame: $80 (offer: $50) - TLR-1 HL light: $50 - Glass hold Glock: $10 - Folding red dot: $80 - M4 mags: $50 - BB 20g: $10 - Red helmet: $10 - Optics Valken: $40 - GP1799: $300 (offer: $250) - Mask: $20 (offer: $15) - Parts: $5 - Trigger (gold): $30 (offer: $20) - Long tracer blue: $50 (offer: $40) - Pouch Glock: $20 (offer: $10) - Pouch: $10 (offer: $5) - Big pouch: $10 (offer: $5) - Drum mag: $150 - Pouch: $5 I’m selling all my airsoft gear I no longer use. I recently bought a house. Location: Edmonton, northeast. Text me 780-729-0565 if you’re interested.

categories:GunsSporting Goods

2942 impressions

194 views

Don’t know much about it I have had the shotgun for 15 years and I have now upgraded

categories:GunsSporting Goods

1352 impressions

93 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Can hold for a non-refundable deposit. Can also do a payment plan. This is the very hard to get, Gen 4 (latest generation) Ruger Precision Rifle in 338 Lapua Mag. Brand new in box, unfired. Comes with everything it does from factory. Will ship at buyer's expense but priority will be given to local sale in Calgary. Stock: Folding, Adjustable Finish: Smoked Bronze Cerakote Grip: Magpul MOE-K2-XL Trigger: Ruger Marksman Adjustable (2.25-5 lbs) Capacity: 5 Barrel Length: 26" Weight: 15lbs Overall Length: 49.25" Length of Pull: 12"-15.50" Folded Length: 37.60"

categories:GunsSporting Goods

11371 impressions

526 views

There's been a few people asking for primer dispensers off of my other 3d printed ads so I have finally come out with a couple options! I will update the ad as I get a hold of more primers (or get their measurements) to confirm fitment and amount of sleeves they can hold! Size 1 (small) - Fits ~10 Sleeves of CCI Primers, Cam-pro/Ginex. ---$10--- Size 2 (medium) - Fits ~15 sleeves of CCI Primers, Cam-pro/Ginex. ---$12--- Size 3 (large) - Fits ~10 Sleeves of Federal, Cheddite, Remington, Winchester (a little loose, but they work) ---$15--- I have a ton of colours available (swatch photo attached) and the option to print in a gradient filament for a multi colour effect as well (+1$ each. Pics 2 & 3) As always, shipping is on buyer.

categories:GunsSporting Goods

9484 impressions

335 views

Hey there,  ALL 20 gauge ammo. 8 boxes lead shot, #4, #6, 7.5, and 8 shot.  $15 each 2 Boxes Winchester Slug (5 rounds).  2 3/4", 3/4" Rifled slug.  $15 each 7 Boxes #3 Buck (5 Rounds) , 2 3/4" - $15 each   2 Boxes #2 shot, 3" STEEL SHOT, - $20 each Prefer local Nanaimo Parksville sale.  Shipping is prohibitive.   Not interested in trades, pls. Thanks for looking!

categories:GunsSporting Goods

6220 impressions

260 views

Will take trade of same value. Tanfoglio Cohai Semi Auto Pistol 9MM 4.5" Barrel Stainless, Restricted. Includes one detachable magazine. Must have valid restricted PAL, I came into ownswership of this, they are staying under the companies buisness licence and stored for 15$ a month, once handgun ban is over they can be transfered to yourself. 1500 + 1 year storage fee = $180

categories:GunsSporting Goods

31537 impressions

3826 views

AR 15 Match grade barrel twist rate 1 - 8 gas block .936" 2x 24" 1x 20" $259.00 each

categories:GunsSporting Goods

930 impressions

102 views

Backpack/rifle case.Barrett padded. New and unused. Includes muzzle pouch and magazine pouch. 50 inches long 13 inches wide. For MRAD 98 BRAVO etc or your other firearms. NEW. Sabre Defence Industries Padded Rifle Case. New. 45 x 15 inch. 75.00 bucks

categories:GunsSporting Goods

35478 impressions

2761 views

Brand New Non Restricted Caliber: .45-70 Govt Capacity 5+1 Barrel:16.5” barrel with 1:20” RH twist 8 groove. 11/16 x 24 threaded barrel with thread protector. Aluminum M-LOK® handguard w/15 M-LOK slots. Forged 416 stainless steel receiver with Armornite® finish. Flat trigger with crisp break. Large Lever loop. Black synthetic stock with textured grip panels. XS Sights® adjustable rear ghost ring sight. HIVIZ® H3 front sight. Part #: 14453 Made in USA

categories:GunsSporting Goods

5396 impressions

313 views

Stoeger: 12/28” M3500 DRT BRONZE 3.5” Price firm. Gun case included in asking price. For an additional fee: - Weatherby Cable Lock at additional fee ($15 each) **Per Federal guideline for sale of non-restricted firearms (https://www.rcmp-grc.gc.ca/en/firearms/buying-and-selling-transferring-f...): - transferor (seller) must obtain confirmation of the validity of the transferee's (buyer's) firearms licence, prior to the transfer of a non-restricted firearm. - In an effort to expedite the sale please be prepared to provide a photo of your active PAL with licence number, as well as your date of birth and email address to confirm using the RCMP website. See link above for guidelines and sale process.

categories:GunsSporting Goods

41447 impressions

1137 views