Brand new Slant Compensator for Type 81 LMG. Small, compact and lightweight option to reduce muzzle flip, specifically manufactured for Type 81 LMG. When firing offhand, the rifle will recoil up and away from support hand, therefore the idea for the slant compensator was born to counteract this diagonal movement. This compensator features 3 positions; off-hand right hand shooting, bench/bi-pod shooting and off-hand left hand shooting. Manufactured in USA, Black Oxide Finish. Be Sure to select correct threading for rifle being fitted to. M16 Thread for T81 SR and LMG, serial numbers <20202001 & all 2021 prefix

categories:Sporting GoodsGuns

8070 impressions

643 views

Beretta BRX1 rifle 3006 caliber New Beretta BRX1 Rifle Made In Italy Straight Pull Action Reversible Ambidextrous Linear Bolt Granting The Ability To Change From Right Hand to Left Hand Model Without Any Tools Available In Multiple Calibers Available In 22″ or 24″ Threaded Cold Hammer Forged Barrel M14x1mm Barrel Thread Detachable 5 Round Magazine Three Trigger Weight Options (From 950 to 1,500 Grams) Barrel With Integrated Picatinny Top Rail For Optics High Performance Polymer Stock Adjustable Length Of Pull With Spacers Extralight Rubber Recoil Pad Can ship no trades !!

categories:Sporting GoodsGuns

19196 impressions

1488 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 145 g/5.1 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11832 impressions

474 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 34 mm/1.35” Length: 108 mm/4.25” Weight: 154 g/5.4 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11217 impressions

394 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 24.5 mm/1” Clearance: 3.4 mm/.133" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 134 g/4.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10277 impressions

393 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 147 g/5.2 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10959 impressions

466 views

Brand new The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2. Made from precision cast black Melonite™ finished steel and compatible with both mil-spec and commercial-spec carbine receiver extensions. Features: Accepts any push-button QD sling swivel as well as the Magpul QDM Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Works with both mil-spec and commercial-spec carbine receiver extensions (buffer tubes) NOTE: The ASAP QD is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, and MOE® Rifle Stocks.

categories:Sporting GoodsGuns

5385 impressions

439 views

Ad Title: Unknown Maker Made in Italy, Percussion Rifle, Cal. .54 Make : Unknown Maker Made in Italy Model: N/A Serial Number: 59995 Type of action: Percussion Rifle Barrel length: 28 inches Caliber: .54 Percussion. Note: Comes with set trigger and a copper box in the stock. Octogonal barrel with rifling. This rifle is heavy being 6,6 pounds. Condition: Very Good condition. The barrel has most of its blue except where the hands were holding the rifle. The action has a nice case hardening. Seems to be in very nice working condition. At one time there was a scope attached to this rifle. Now we are left with 4 holes where were the screws. Price: $395.00 Ref: 24A147 Shipping: $70 in Canada ($40 if Barrel and action are separated from the stock) Basic Insurance: $100 included with all purchases Full insurance: Add 2% of the value of your purchase to get full coverage Payment: By E Transfer

categories:Sporting GoodsGuns

15049 impressions

1125 views

Feed your old beauty, make her and yourself happy again! Newly made 41 Swiss brass cases from brand new Starline 50 Alaskan brass cases：cut，annealed with AMP annealer，formed using Lee 41 Swiss full length sizing die，trimed with case length 1.525”（ Observed that feeding reliably with loaded ammo OAL length between 2.180“-2.220”, so with 0.005'' extra length for possible cast bullet variation, instead of 1.520'', easily trimed off the extra 0.005'' brass if you don't like it ), cleaned off lube then annealed once more, tested to extract and eject reliably. Ready for reloading. 9$ each+shipping , minimum 12 pcs. Have some hard cast bullets cast with customized heeled bullet mold designed by myself (http://accuratemolds.com/bullet_deta...bullet=43-310F) to go with those cases if you desire, all lubed with Alox and sized with .429'' Lee bullet sizer, lubed with Alox again ( tested free of leading, even after more than 100 shots, no leading observed: yes, Vetterli is so fascinating, I did extensively loading test with more than 1000 rounds through my M78 and M69/71 and then designed my own bullet for her and am thinking of designing a paper patch bullet. ) , tested to be working quite well : check those 5-shot and 10-shot groups shot at 40 meters indoor range with 1869/71 Vetterli rifle). Ready for reloading. 0.5$ each+shipping, sorry, 3 bullets per case ordered limited due to limited bullets quantity, no place to cast bullets during winter time, should be able to cast more bullets after winter. With my cast bullets and Lee 41 Swiss full length sizing die sized brass cases, you can hand seat the bullet, then use Lee 41 Swiss seating die with seating stem removed to give the loaded round a very firm and consistent crimp at the first groove from the bottom ( the seater will clear the bullet instead of the case mouth), by feeling that the case mouth brass is crashed a little bit ( it is ok that the bullet might be turned by hand inside the case mouth after crimping, but it would be firmly seated, won't be pulled out by hand)，don't go too much，too much crimp might cause the case mouth bumping up too much and you might encounter difficulty to chamber especially with those Vetterlis with tighter chamber. Photo 5 & 6 show that the right one was hand seated before crimping, the left one was properly crimped, and the abovementioned cast bullet. FYI only, use it at your own risk: I found using the recommended charge from the internet of 11 grains of Trail Boss to be around 2200 fps and kicks hard，eventually I reduced the charge to 7 grains of Trail Boss to achieve around 1400 fps, very close to Vetterli designed velocity and very mild and pleasant kicks, no grease cookies, no wads needed. I rendered that the 11 grains of Trail Boss charge was gained from improperly reloaded rounds not using heeled bullets and not getting proper crimp. I did tests with Tripple 7 also, found the data on the internet is way too much also, I got 1900 fps muzzle velocity reducing the charge to 24 grains by weight of Tripple 7, which is only half full of case capacity！I did not go further experimenting with Tripple 7, cause I got very good results with Trail Boss, and I did not enjoy cleaning the bore after every range trip burning Tripple 7.

categories:Guns

9558 impressions

833 views

Selling/trading a Marlin 30 AS 30-30. Overall it's in good shape. JM stamped, 20" barrel. Bluing shows well on the majority of the rifle with the exception of the right hand side of the receiver where it looks like moisture sat on it and took of the finish, has lightly freckled as seen in pictures. Wood stocks are in nice shape, some light finish loss and handling marks throughout and one fairly decent rub on the left side of the forestock. Bore is excellent. Comes topped with a Tasco 3-9x40 scope with 1" Weaver rings. Front sight is present, rear sight is not. Looking for $950 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

2107 impressions

206 views

Selling because cash is tight and I have another - don't miss your chance to add this beautiful investment to your collection. This superb Webley WG Army specimen was made by P. Webley & Sons circa 1896 chambered in .476 Eley and .455 Webley, and sold by the famed John Rigby & Co. in London. Established in 1775, John Rigby & Co remains to this day a staple of the fine firearms market. Their role in this piece's history adds even further to collector value. These revolvers were very popular private purchases among sportsmen and higher ranking officers around the turn of the 20th century up through WW1 as reliable, accurate, and elegant handguns. With an impressive 6" barrel and mirror-bore rifling, this is a collector's or target shooter's dream. I can add a box of 50 factory new Fiocchi Heritage .455 Webley rounds with purchase of the revolver if you have a PAL. If you don't want these rounds, take $100 off asking price. As a pre-1898 antique, this can be owned and used without any registration or headaches. Visually this revolver retains most of its original shiny dark blue finish with scattered minor loss from 130 years living. The trigger, hammer, ejector, cylinder release mechanism, and hinge screw have a shiny silver "in the white" finish giving a proud and bold contrast. The original checkered square bottom hardwood grips are solid, showing some minor dings and a tiny chip on the right. Sharply stamped "WG Army Model" on the top strap with calibers ".455/.476" Webley and Eley, and the W&S winged bullet logo on the left of the frame. The barrel is hand etched with the retailer address "JOHN RIGBY & Co. 72 ST JAMES'S St LONDON S.W.". The serial 13XXX places manufacture in the mid-late 1890s and makes this one of the most modern antiques you can get. The bore retains shiny, strong rifling with scarce patches of wear. The action functions excellent in single and double action, leaving nothing to be desired. The cylinder indexes and locks up with almost no wiggle for reliable firing and the timing is excellent. Comes with FRT antique papers and repro leather Webley holster. Can come with box of Fiocchi .455 Webley ammo if you have a PAL. Call any time or local meetup Calgary or Vancouver depending where I am. Ships Canada No PAL, 18+ Check my ads for more antiques! I make no claims about the safety of shooting ANY antique. Check with your gunsmith! (Tags: England, Britain, French, MAS, German, Reichs, American, Canadian, Dominion, .44, .45, .450, .476, ACP, Auto, Boxer, Kynoch, Smith & Wesson, Remington)

categories:Sporting GoodsGuns

24351 impressions

1276 views

Magnificent rifle Antonio Zoli made in Italy. 30-06. With hard case, only used at the shooting range, 2- boxes.Bolt on the left side. In perfect condition, a magnificent beautiful wood . (New Hand forged knife. Skinner knife hardness 62. Handle Mammoth tusk blade Austrian steel Bohler. This is a bonus for those who buy AZ.).Browning carbon limited edition 7mm. Browning cenergy CX 12 gage. I would preferably want to sell everything together if the price would be higher separately. Super condition!!!! 9.9 from 10. All with boxes.

categories:Sporting GoodsGuns

160330 impressions

12112 views

Selling my left-handed Savage Axis II XP in .30-06 Springfield. This is a great entry level hunting rifle that has served me well, but I’ve recently upgraded to a Tikka and no longer need this one. Comes with, Weaver 3x9x40mm scope. 1x 4 round mag. 2x 20 round boxes of Nosler 168GR. copper expansion tip ammo. Butler creek shoulder sling. Black Allen soft shell carry bag.

categories:Sporting GoodsGuns

1523 impressions

71 views

Savage Model 110 LH 6.5 CM with stainless barrel and adjustable stock Vortex Razor LHT 3-15x42 scope Vortex precision bases Rifle has at most 200 rounds through it. Complete kit new is $3800 Looking to sell for $3300

categories:Sporting GoodsGuns

3256 impressions

265 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Iver Johnson "American Bull Dog", .38 RF short and long Revolver Iver Johnson was one of the most prolific makers of pocket revolvers in America, from 1871 to nearly the present. One of the earliest makers of bulldog-type, double action revolvers, the Iver Johnson American Bull Dog is well known and in demand. These were made by Johnson's and the relief grip showing the American eagle on a shield is typical of Johnson's ware. ​ This one is in very fine to excellent condition, with 99% original nickel. The action is accurate and strong, and the cylinder indexes and locks properly with no play. The bore of the 2 1/2-inch barrel is good with strong rifling throughout. The black hard-rubber grips are excellent and undamaged. SN 2407, excellent overall. History & Background Iver Johnson (1841-1895) was a Norwegian gunsmith who came from Bergen to America in 1863. He found work immediately at Ethan Allen's factory in Worcester, Mass. where he met Martin Bye. Johnson worked at Allen's through the civil war years, as demand for firearms was high, and work was plentiful. By 1871 Johnson and Bye had decided to venture out on their own and founded Johnson Bye & Co. in Worcester, moving to Fitchburg by 1891. In 1883 Martin Bye left the company, selling his interest to Iver. The company name was changed to its most famous form, "Iver Johnson's Arms & Cycle Works, Fitchburg, Mass.", a name it would retain until the outbreak of the First World War. Iver Johnson did not only produce a large variety of firearms, they were also famous for their excellent quality bicycles and motorcycles. The company would remain in business until 1993. The name was "revived" in 2006 and the brand is still used today.

categories:Sporting GoodsGuns

19001 impressions

841 views

Not your average x bolt Skip fluted “heavy sporter” hand lapped 26” barrel Spiral fluted bolt True carbon fiber stock 20moa browning base NO SCOPE,RINGS, BIPOD, SLING- RIFLE AND RAIL ONLY!! Recoil hawg brake with tool and cap Under 150 rds through it Comes with whatever ammo I have left at the time (likely 6-8 boxes) plus a shwack of once fired brass(mostly hornady) Shoots lights out, 1/2 moa 2400obo in BC Pls text first

categories:Sporting GoodsGuns

14053 impressions

1055 views

Selling my brand new, never fired Tikka T3x TAC A1 (left-handed) chambered in .308 Win. Features a 24" threaded heavy barrel and comes factory equipped with a muzzle brake. Includes: 10-round magazine 3 factory spacers (shims) for adjusting length of pull Original factory configuration Rifle is BNIB (Brand New In Box), never used, and in pristine condition. A top-tier precision rifle, perfect for serious long-range shooters. Asking for 2950$ shipped (sold for 3300$ +tx) PAL is a must Feel free to text me at 450-779-8783 if you have any questions.

categories:Sporting GoodsGuns

4230 impressions

274 views