Thompson Center Arms .50 caliber Thunder Hawk In-line rifle has a tapered round 1" to 7/8" x 21" stainless steel barrel with light handling marks to the finish. The bore is shiny and the rifling overall is good and sharp. It has a 1:38 twist and a mounted weaver rail. Bullet loads up to 150grn There are factory mount holes to install a ring-type set up. The Rynite stock has a checkered wrist and forend. The stock has a rubber recoil reducing pad and sling swivel studs. The firing mechanism is set up for the #11 percussion cap or 209 primer and has an outside manual bolt position safety. Length of pull is 14", the overall length is 39", weight is 5.4 lbs. CFP/RCMP courtesy of Bill C-71 and JT will require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Private sales do not require any information about the firearm. Private sales do not require any information about the firearm. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code. Valid PAL required. Will ship on your dime. ANY ATTEMPT TO INQUIRE IF A PURCHASE CAN BE MADE WITHOUT A VALID AND CONFIRMED PAL WILL RESULT IN AN AUTOMATIC POLICE AND CFP CENTER REPORT. DON'T WASTE MY TIME WHICH MAY GET YOU TIME!

categories:Sporting GoodsGuns

109452 impressions

9225 views

Brand new Non-restricted  Caliber: .308 WIN Capacity: 10 Action: Bolt Action Barrel Length: 24"  LOP: 330-355 mm Twist Rate | Number of Grooves: 1 : 10 / 4 Trigger Pull Weight: 6–13,5 Stock: Synthetic Weight: 5.3kg A sport special that combines the cutting-edge CZ 600 platform with a sophisticated chassis from the world-renowned MDT brand. This Light Grey cerakote-finished model features an MDT Elite Pistol Grip, adjustable cheekpiece on an AR-15-style buffer tube, and MDT CCS stock with adjustable LOP via butt pad spacers. It also comes with a Picatinny rail, M-LOK mounting points and an Arca Swiss rail. A specially designed MDT AICS 10-round magazine, equipped with a proprietary CZ follower, ensures fully reliable feeding from the ejection port. With advanced ergonomics, a heavy profile cold hammer forged barrel, and an innovative single-stage, easy-to-adjust trigger mechanism, CZ guarantees sub-0,75 MOA accuracy (five-shot groups at 100 meters using match-grade factory ammunition). Made in CZ

categories:Sporting GoodsGuns

14615 impressions

1539 views

For sale is a rare Browning BAR semi-auto rifle in .22 LR. This model has a straight (i.e., English) stock. It has a removable tubular magazine. The receiver has an integrated rail for mounting optics. There are some scratches in the clear-coat, nothing deep. The blueing on the receiver is in good condition, but there is some freckling on the barrel. It is missing the forend screw (doesn't effect the function). Everything works as it should!

categories:Sporting GoodsGuns

9808 impressions

964 views

For sale is a like new Smith and Wesson (S&W) Model 1854 tactical lever-action rifle in .44 Mag. It has a stainless finish with black synthetic stock/forend. This model has a big-loop lever with flat trigger. It comes with a picatinny rail (for mounting optics) with integrated ghost ring iron sight. In addition, it has a picatinny rail on the bottom of the handguard (for mounting accessories), along with M-Lok slots at 3 & 9 o'clock positions. It has a side-loading gate with removable tubular magazine. The barrel is threaded from the factory for muzzle break (comes w/ the thread protector). It is in excellent condition with less than 100 rounds through it! A brand new Lee Reloading Kit for .44 Rem. Mag. is included with the rifle!

categories:Sporting GoodsGuns

9036 impressions

593 views

EGE Arms E40T, 12 gauge, over under short tactical M-lok shotgun, black, E40TBLK Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Specifications Non restricted Caliber: 12 Gauge Chamber: 3″ Capacity: 2 Choke: Cylinder, Modified, Full Break-Action Full Length: 26″ Sights: Fiber optic Barrel Length: 30 cm — 11 & 7/8″ LOP : 12″ Overall Length : 26.5″ Weight : 2.6 kg Made in Turkey Features Solid with A slick look ! M-lok slots bottom left & right ! Soft rubber butt pad 12 Gauge, 2 & 3/4 to 3″ 2 shot capacity Picatinny Accessory Rail ready to mount your favorite red dot Also acts as v-grove rear sight Break action with extractor Ambidextrous Safety/Selector Red fiber optic front sight Chokes : Cylinder, Modified, Full, case included (no key included) 2 side picatinny accessory rails already mounted and ready to rock! Rails also seems to have A QD mount slot on each side.

categories:Sporting GoodsGuns

9020 impressions

960 views

For sale is a Marlin Model 336W lever-action rifle in .30-30 Win. It has an upgraded Williams adjustable (elevation/windage) rear peep sight, and a red fiber optic front sight. It also comes with a rail for mounting optics. A hammer extention has been installed as well. It has parkerized finish on the metal, and the wood has been professionally refinished in dark satin walnut with 3 coats of bees wax! It is one of a kind rifle, and looks absolutely beautiful!

categories:Sporting GoodsGuns

11251 impressions

620 views

For sale is a Marlin Model 336W in 30-30 Win. It has a micro-groove barrel. It comes with a pre-installed rail for mounting a scope. It is in excellent condition with less than a box of ammo through it!

categories:Sporting GoodsGuns

12417 impressions

706 views

Chiappa Double Badger Rifle 22LR/410.19" barrels, wood buttstock and for-end, double trigger.Each barrel is selectively fired by its own trigger and controlled by a top tang safety that is easy to use quickly and reliably. The Double Badger comes with a Williams Fiber Optic Ghost ring and front sight as well as a 3/8" dovetail rail for mounting optics. Designed for portability, pushing the trigger guard down allows the Double Badger to fold in half for a total overall length of 21.20" making storage and transport easy. Gun is in good condition. No trades and not taking offers. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

13739 impressions

949 views

Brand new Model Number: G43.STS TAN Water Resistant: 33ft Mount: MIL-STD-1913 Rail Fixed Magnification: 3X Eye Relief: 2.5″ (63.5mm) Field of View: 7.5 degrees Sealing: Fog resistant internal optics The G43 Magnifier is a miniaturized version of battle-tested G33 Magnifier, making it one of the most compact and lightweight magnifiers available. The mount provides fast transitioning from 3X to 1X and comes with a 7mm spacer to properly adapt to any HWS model.

categories:Sporting GoodsGuns

3774 impressions

435 views

For sale is a Marlin model 1895 lever-action rifle in 45-70 Govt. It comes with the rail for mounting a scope! It has a low round count with a few blemishes.

categories:Sporting GoodsGuns

18225 impressions

1072 views

For sale is a Marlin 336W lever-action rifle in 30-30 Win. It comes with the rail for mounting a scope. It also has the sling swivels and a hooded front sight.

categories:Sporting GoodsGuns

12524 impressions

722 views

For sale Tikka T3 Lite Stainless .308 Win in perfect, as-new condition. Has about 60 rounds through the barrel. STAINLESS BARREL and ACTION Black synthetic stock. Detachable Magazine. Very accurate rifle. No issues, just cutting down my guns stock. CA$1,100 =========================================================== You may also need: Tikka Picatinny scope bases 0 MOA and Visionking scope rings, 30mm with inserts for 25mm scope. Extra CA$ 100 ————————————————————————- Swivel Stud with Picatinny Rail Bipod Mount with adjustable V9 Rifle Bipod Extra CA$ 50

categories:Sporting GoodsGuns

27156 impressions

2626 views

For sale is a Marlin 336C lever-action rifle in 30-30 Win. It is in excellent condition with very low round count. It has a gold trigger and hooded front sight. It is missing the rear sight, but it comes with a scope rail for mounting optics. It also comes with a hammer extention. The lever is wrapped in leather!

categories:Sporting GoodsGuns

18619 impressions

1202 views

Benelli R1 ARGO 300 Win.Mag. Semi-Auto.20" Barrel with sights, Benelli Picatinny Rail Scope Mount installed ($179.99 plus tax),Black synthetic ComforTech recoil dampening stock. Some minor storage/hunting marks. Gun is in good condition. Local is preferred, but will ship at buyers expense.Further Lost insurance can be purchased by the buyer. Valid Pal a Must. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

18799 impressions

1869 views

For sale is a Marlin 336W in 30-30 Win. It has a rail for mounting scopes. It also comes a hammer extention. It is in excellent plus condition with only a few rounds through it!

categories:Sporting GoodsGuns

15872 impressions

1164 views

AN EXCELLENT CONDITION SAVAGE MODEL 10FP CHAMBERED IN 308 WINCHESTER. LOW ROUND COUNT (275). INCLUDES THE WEAVER PICATINNY RAIL SCOPE MOUNT. ALSO HAS THE FACTORY 'ACCUTRIGGER". LOCAL PICK-UP OR BUYER PAYS ACTUAL SHIPPING COST. P.A.L. VERIFICATION  THANKS BUT NO TRADES ON THIS ONE

categories:Sporting GoodsGuns

7650 impressions

858 views

BNIB HBI-10237-01 Buyers pay the shipping, contact me for an estimate. CZ Bren 2 Handguard 13.8″ M-Lok (GEN 2) The HBI 13.8″ handguard for the Bren 2 MS is ideal for 14″ barrel models in both 556/223 and 7.62×39 calibers. Our 13.8″ handguards are designed to truly “free float” the barrel and provide the operator with over 3x the support hand area and over 7x the M-Lok positions as compared to the factory Bren 2 MS handguard. PEQ-15/ATPIAL type IR sight systems and peripheral switches are easily mounted out front above your support hand thanks to a full length continuous 1913/picatinny top rail. Our extended Bren 2 MS handguards feature a window at the gas block that has been carefully designed to allow operator access to gas system adjustments while in use. The gas block window is bridged with a removable 1913 plate. With the 1913 plate removed, the gas block and regulator are exposed for complete disassembly and cleaning. This two piece design allows access to the gas system without having to remove the handguard shroud from the weapon. Additionally, the use of two countersunk screws to secure the 1913 plate means that sighting systems mounted the to 1913 plate WILL retain zero when the plate is removed/reinstalled after cleaning. Every handguard includes an integrated QD mounting plate system for seamless sling integration on either the left or right side. Additionally, we are proud to offer a direct mount light variant compatible with Surefire® 300/600, StreamLight® Protac Rail, Modlite 18650 series, and other popular bodies. The simple and robust mounting design replaces a single M-Lok position with body specific mounting geometry for weapon lights. This light mounting solution offers the simplest, lowest profile, lightest weight, and arguably most rigid light body integration at no additional cost. If your application requires a weapon light, you might want to consider this option. Features 13.8″ M-Lok Handguards for the CZ Bren 2 MS Gen 2 Two Piece Design With Direct Access to Gas Regulator M-Lok Accessory Interface, Full Length 1913 Top Rail QD Mounting Plate Included Optional Direct Mount Light Geometry for select Surefire® and StreamLight® Bodies Total Weight Installed is 12.04 oz (Factory Bren 2 MS Pistol Handguard is 10.27oz) Machined Aluminum 6061, Anodized MIL-A-8625 Type 3 Hard Coat Multiple Patents Pending Designed and Manufactured completely in USA. 922r Compliant.

categories:Guns

9405 impressions

621 views

Little Badger 22 LR Single Shot Break Open Rifle 500.140 Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available The Little Badger is the ultimate packable survival gun. Available in .22lr or .22WMR and now 17HMR. This lightweight, ultra-compact, break-open rifle is designed to go anywhere at any time. When the action is opened and the gun folded, it measures a mere 17” overall length and stows neatly in an included pack/case. The wire frame stock keeps weight to a minimum and the integrated shell holder in the back holds twelve cartridges so ammo is always at the ready. The Little Badger comes equipped with an M1 Carbine style front and rear sight. Picatinny rails are mounted top, bottom and on both sides just forward of the receiver for mounting optics and accessories. An optional handle/cleaning kit combination accessory screws into the bottom of the receiver. Compact length and weighing only 2.9lbs, the Little Badger can truly be taken and ready for use just about anywhere! MAKE Chiappa MODEL Little Badger FIREARM CLASS Non-Restricted CALIBRE 22lr MAGAZINE CAPACITY single shot BARREL LENGTH 18.5"

categories:Sporting GoodsGuns

29083 impressions

2347 views

Grips, dummies, rails, flashlight/scope mounts, etc... You name it I'll print it (no receivers or other restricted parts) Can look at custom designs too, like a charger bridge repair for Enfield sporters etc. Doesn't have to be firearm-related prints/designs, I am fully capable of printing/designing any kind of stuff. shipping ok.

categories:Sporting GoodsGuns

29648 impressions

2971 views

Brand new Compatible with 34mm Maintube 2″ Forward Cantilever Offset Height: 1.46″/37mm Quick Release Mechanism Mount on Picatinny/Weaver Rails Aluminum Construction Type III Anodized Finish Give your riflescope solid support using the EOtech 34mm PRS QD Cantilever Ring Mount. This cantilever adapter is compatible with 34mm maintubes and mounts on Picatinny or Weaver rails. It provides a 2″ forward offset for tailoring eye relief and head placement, and has a quick release mechanism for fast and easy attachment. The mount is made of aluminum with a Type III hard anodized finish and provides precision, stability, and strength when you attach your riflescope to your firearm.

categories:Sporting GoodsGuns

3570 impressions

595 views

Brand new Sealed in original package Description: 3 MOA Red-Dot with Adjustable Brightness MOTAC: Motion-Activated Illumination 1x Magnification/30mm Clear Aperture Fully Multi-Coated / Aspheric Lens 100 MOA Windage & Elevation / 1 MOA IPC CNC-Machined Magnesium Housing TruHold Lockless Zeroing System Waterproof, IPX7-Rated Picatinny & KeyMod Mounts Made in the USA Sig Sauer engineered the ROMEO1 1×30 Open Reflex Sight to enhance your firearm’s aiming capabilities. Its 3-MOA holographic illuminated reticle offers a brilliant red dot with adjustable brightness and Motion-Activated Illumination System (MOTAC). You will see your targets with clarity thanks to a specially-designed, aspherical lens that generates flat and distortion-free images. To enhance transmission of light and to eliminate glare, the lens is also treated with high-performance full multi-coatings. To account for wind and ballistics, the windage and elevation adjusters offer 100 MOA ranges with 1 MOA increments. Designed to endure the toughest battlefield conditions, this sight is packaged into a compact, durable, lightweight, and waterproof housing. To increase durability, the housing was CNC-machined from a single piece of magnesium. Another highlight of the construction is a TruHold twin-spring adjustment system. It is designed and endurance-tested to withstand handgun recoil, deliver lock-less zeroing performance, and to return to zero with impeccable repeatability. Reticle: Red-Dot reticle: 3 MOA 1 MOA impact point correction 100 MOA windage and elevation adjustment range MOTAC: Motion-Activated Illumination Optical Performance: Magnification: 1x Molded glass aspheric lens High-performance coatings Unlimited eye relief Mounting Compatibility: Picatinny rails KeyMod panels Construction: CNC-machined magnesium body TruHold twin adjustment springs ensure a lock-less zeroing and repeatability Waterproof and fogproof Shock-resistant $520 shipped Not interested in trade Thanks

categories:Guns

16213 impressions

1627 views