Brand new Includes One Magazine, Speed loader and carry case Fits Glock 20/21 GEN 4 Features Adjustable Sights The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. Last Round Lock Open The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol. Internal Firing Pin Safety Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. Finish All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. 10 Second Installation Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. One Year Factory Direct Warranty Warranty covers any defects in materials or workmanship. (Excluding S&H Charges). Note: Do not use Stinger or any other hyper velocity ammo Do not use Remington Thunderbolts Made in USA

categories:Guns

12438 impressions

1083 views

Glock 19 Slide USA made No LPK just the complete upper slide/ assembly Shipping Via UPS arrives within 1-3 days(Shipping From Alberta) 900 SHIPPED.

categories:GunsSporting Goods

1657 impressions

279 views

Built this for concealed carry or idpa, 500 rounds thru the set up, FCU not included Wilson combat carry grip with tungsten weight sig compact pro cut slide assembly 9mm threaded barrel 13.5 LH and recoil spring Leupold delta point pro 6 moa red dot rds sight Bravo owb holster Barrel and slide require PAL verification $650 slide $350 barrel $50 recoil spring $150 grip with weight $700 dpp red dot $70 flat trigger $40 bravo holster Shipping & insurance on buyer

categories:GunsSporting Goods

3152 impressions

603 views

Hi I’m looking for a glock 19 gen 3 slide

categories:GunsSporting Goods

2845 impressions

303 views

Have full size sig sauer p320 pro cut slide. Gray fox strategic phoenix light compatible holster and inforce gen1 light. All lightly used but in excellent condition. Also not pictured oem p320 barrel if interested. 800$ PAL required for sale.

categories:GunsSporting Goods

1671 impressions

385 views

Remington Gamemaster 760 270 pump action Bushnell scope Great condition, Action and slide work flawlessly $950 obo + shipping at buyers expense Proof of Pal is required Phone or Text on pls

categories:GunsSporting Goods

4860 impressions

681 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2329 impressions

332 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

3821 impressions

416 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2348 impressions

386 views

Brand new For Glock 17 Gen 4 Slide only Optic Ready Color: Battle Bronze MFG # RA-RA12G106B Made in USA

categories:Guns

11099 impressions

1150 views

Brand new  For Glock 17 Gen 4 Slide only Optic Ready Color: Black Fits Docter, Truglo, Eotech MFG # RA-RA10G106A Made in USA

categories:Guns

6857 impressions

678 views

Brand new Match-grade precision upgrade slide Recessed slide cuts for compatibility with RMR® or other optic (cover plate included) CNC machined from 416 stainless steel billet for superior corrosion resistance and durability Quench-Polish-Quench (QPQ) thermo-chemical case hardened to resist normal wear Front and rear serrations for easy slide manipulation Window cuts for more efficient cooling and airflow Individually hand inspected for accuracy No gunsmith required Limited lifetime warranty

categories:Guns

6828 impressions

747 views

*Brand New* Slide Cut: Omen V1 Optic Cut: Trijicon RMR/SRO/Holosun 507 Ready W/ Cover Plate In Matching Slide Finish Slide Material: Steel Slide Finish: Crimson Red Cerakote Internals: Included Sights: No spsr height. local pickup preferred but I can also ship at buyers expense Selling it with 1: Hyve-technologies cover plate; $20 2: Apex Tactical, CZ P-10, Extended Magazine Release $90 3: Apex Tactical, CZ P-10, Extended Slide Release $130

categories:Guns

2807 impressions

266 views

Brand new Manufacturer: CZ Model: 0423010734ND Compatibility: CZ-75 Shadow SP01 Includes:  – 1pc MAGAZINE CATCH – 6pcs SLIDE STOP – 1pc SEAR – 1pc FIRING PIN – 3pcs EXTRACTOR – 1pc FIRING PIN SPRING – 3pcs EXTRACTOR SPRING – 3pcs RECOIL SPRING – 2pcs SLIDE STOP spring – 1pc TRIGGER SPRING – 1pc MAGAZINE CATCH SPRING – 2pcs MAIN SPRING – 3pcs RECOIL SPRING GUIDE

categories:Guns

8041 impressions

779 views

Brand new  For Sig Sauer P320 MFG # RA-RA42P001A Made in USA

categories:Guns

4544 impressions

521 views

Brand new  For Glock 43/43X/48 MFG # RA-RA42G002A Made in USA

categories:Guns

11525 impressions

1218 views

Can do local sale in victoria or shipping depending on location of buyer glock 17 blow back co2 powered realistic slide comes with the carrying case official umarex glock brand bb pistol shoots 4.5mm .177 steel bbs licensed by umarex made by glock it is the .177 co2 bb pistol model can find exact specs on umarex website shoots approximately 365 fps it is in mint condition comes with only the pistol need to buy own co2 cartridges or ammo

categories:Guns

6360 impressions

475 views

Kimberly 1911 Brushed polished carbon slide aluminum frame. Looking for a speedy sale, please only serious buyers. Thanks GERALD

categories:Guns

2967 impressions

180 views