4 IN 1 TOLL FOR GLOCK (Push Button Armorer's Multi-Tool) STILL IN THE PACKAGE. NEVER USED. Works On Every Glock. Fits in Your Pocket. Push button, snap-open tools lock in place Features 4 valuable tools: -Armorer's punch Front sight driver Flat blade driver -.050" Allen wrench Sleek, ergonomic, packet with function. In every way a thoroughly modern armorer's tool for Glock owners. 4 different tools store inside the handle and each snaps open and locks in place with the push of a button. Remove pins for disassembly, change out front sights, remove slide lock spring and locking block and adjust aftermarket rear sights. Smart Precise, advanced...just like your Glock. See pictures for greater detail.

categories:Sporting GoodsGuns

7161 impressions

539 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:Sporting GoodsGuns

87775 impressions

2576 views

Hunting sight in mint condition. Never used nor mounted. GPS, Wi-Fi, & HDMI and SD slide.

categories:Sporting GoodsGuns

2141 impressions

418 views

Wk 180 gen 1 mag pull edition, comes with battle panel, and gear shown. No ammo. The 2 clear mags are the 10 round lar, slide together. And the original p mag 5 pin.

categories:Sporting GoodsGuns

2927 impressions

402 views

Prices are parts disassembled by you. please don't send whole restricteds in mail. Non R is ok i have a PAL. send slides and parts to be cerakoted only. Trusted and in business for 7 Years never leave customers unsatisfied. G's extend your drip to your glizzies. roadmans have it sparkle and dazzle opps when you back it out. $100 pistols/Knives $200 shotguns and Rifles any basic color. Do car parts also autobody background 9-5. ALL PICS ARE MY WORK ONLY

categories:Sporting GoodsGuns

8547 impressions

1177 views

The Gun goes for around $350 NEW. ( Everything works like new ) Comes with 25% filled BBs Comes with tons of air cartridges Gun has slide back

categories:Sporting GoodsGuns

2872 impressions

309 views

Darne sliding breech shotgun 12 gauge Side by side bird hunter mod EL R 11 Like new

categories:Sporting GoodsGuns

4098 impressions

735 views

Brand new Factory Mossberg 14″ barrel conversion kits for the Mossberg 500/590/590A1 series of shotguns. This kit gives you everything to make your Mossberg shotgun into a short barreled shotgun. All the parts have a parkerized finish. Included 14″ Barrel Tube Nut Magazine Cap Magtube Magazine Spring Retainer Magazine Spring Forearm Action Slide Assembly

categories:Sporting GoodsGuns

7930 impressions

779 views

Remington Gamemaster 760 270 pump action Bushnell scope Great condition, Action and slide work flawlessly $950 obo + shipping at buyers expense Proof of Pal is required Phone or Text on pls

categories:Sporting GoodsGuns

6340 impressions

938 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2957 impressions

494 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2744 impressions

407 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2776 impressions

492 views

For sale is a brand new Rokin PX-7 12 gauge shotgun. Simple, yet beautiful. With a timeless look and a modern feel, these shotguns will keep you true to the sport. The PX-7 features a rubberized butt plate, a polished walnut stock and pump with textures for maximum control, and an easy-to-use slide lock lever. The PX-7 also features a dovetail rear rail and a fixed front sight. This shotgun also has a forward and rear sling point. Barrel length 18.5" total length 39.5" capacity 2+1 or 4+1 3" chambered Includes hard case If you have any questions or would like more pictures feel free to call, text or email! 
+tax(12% in BC, 5% outside BC)+shipping 
local pickup is available.
 250-753-3355 (Call or Text) 
Must have your PAL to purchase.

categories:Sporting GoodsGuns

9874 impressions

1359 views

Brand new When you need fast and accurate target acquisition, choose the Sig Sauer Romeo3 Mini Waterproof 1x25mm Reflex Sight to maintain a consistent zero shot after shot. The compact size of these Red Dot Sights from Sig Sauer allows low or co-witness mounting. Each unit is CNC-machined from aircraft grade aluminum for lightweight strength. The Sig Sauer Romeo3 Mini Fogproof 1x25mm Reflex Sight is equipped with MOTAC (Motion Activated Illumination) to power off when the unit isn’t moving to save battery power, yet still remember your last brightness setting next time you turn it on. Spectracoat lens coatings and 11 illumination settings combine to give you ultra clear daylight and night vision images from the Sig Sauer Romeo3 Lightweight 1x25mm Mini Reflex Sight. Specifications: Magnification:1x Objective clear aperture:25mm Objective diameter:25mm Material:Aircraft grade CNC Aluminum Reticle:3 MOA DotAdjustment increments:1 MOA Elevation/windage adjustment range:100 MOA Color:Graphite Battery:CR2032 Weight:1.4 oz. Length:2.4 in. MOTAC motion sensing technology immediately powers up illumination when it senses motion and powers down when it does not, to extend battery life. Spectracoat ultra wide broadband anti-reflection lens coatings reduce surface reflections to extremely low levels across the entire visible spectrum, providing superior light transmission. Stealth ID deflection armor trapezoidal surfacing breaks up the shape and visibility of the optic along with pistol slide serrations and grip checkering. Proprietary red-notch coating ensures a bright red dot Maintains confident zero 9 daytime illumination settings 2 night vision illumination settings Unlimited eye relief Side-loading battery so batteries can be replaced without removing unit from firearm IPX-7 waterproof rating for complete water immersion up to 1 meter Fogproof

categories:Sporting GoodsGuns

5713 impressions

501 views

Brand new Includes One Magazine, Speed loader and carry case Fits Glock 20/21 GEN 4 Features Adjustable Sights The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. Last Round Lock Open The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol. Internal Firing Pin Safety Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. Finish All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. 10 Second Installation Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. One Year Factory Direct Warranty Warranty covers any defects in materials or workmanship. (Excluding S&H Charges). Note: Do not use Stinger or any other hyper velocity ammo Do not use Remington Thunderbolts Made in USA

categories:Guns

15432 impressions

1333 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

4194 impressions

485 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. - CZ 75 SP-01 SHADOW 'ORANGE' 9mm caliber - NEW in black polymer carry case - 4.5 inch /114.3 mm long match grade burnished barrel - `ORANGE` meaning: On this pistol; all parts are HAND-FITTED to extemely tight tolerances by a master-gunsmith at the CZ Custom factory at the time of production for outstanding accuracy compared to the standard CZ 75 SP-01 - 3x 10 round steel magazines - THIS PISTOL IS IN IT`S ORIGINAL FORMAT and has not been altered in any way! - Full steel frame and slide... - Spare parts; recoil springs and shock-buffers in pictures (are all included) from the factory - Oil bottle (with oil), cleaning brush and patch puller (included) - Instruction manual (paper) and instructional DVD (included) - Extended Ambidextrous Safety - Extended magazine release - Extended beavertail - Checkered front and back straps and trigger guard - Super smooth polished trigger in single and double action - Skeletonized hammer - Accessory rail under the barrel shroud - Novak-style fixed rear sights and red fiber optic front sights - Integrally flared magwell - Front and rear slide serrations - Stainless steel guide rod and spring with shock buffer - 'Orange' aluminum, agressively-checkered CZ grip panels - Weight 40.7 oz / 1153 g unloaded Note* Serial number has been blacked out in all photos

categories:Guns

33146 impressions

3602 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. This will be the most precise and accurate pistol, with the best trigger you will ever own!! - Smith & Wesson 'MASTER' Model 52-2 (38 special wadcutter) Target/Competition pistol - Beautifully engineered and crafted For COLLECTION and TARGET SHOOTING - All parts are carefully hand-fitted to extremely high tolerances at the S&W Performance Center, USA - Date and place of Manufacturing of this pistol: Oct.19,1991, Springfield, Mass. USA - Extremely RARE /Never seen BRAND NEW 'PRISTINE' in original box, (NEVER FIRED!!) - 5 inch /127mm barrel with integrally milled lock-up bushing as part of the muzzle for SUPER ACCURACY - Semi-auto, Single action trigger, manufactured with an IMPROVED EXTRACTOR compared to the original (model 52) - Truly Excellent, fully adjustable rear sights - Hammer-block safety /slide-mounted (when engaged, the hammer-block safety rotates the firing pin so that it is not in line with the hammer when dry-firing. - Astonishingly-short, crisp, light TRIGGER PULL and reset! - Solid wood, aggressively checkered panel-style S&W grips - Highly POLISHED feed ramp. - Beautifully blued high-gloss finish on slide and frame. - Cleaning and takedown tools,...still in SEALED plastic bag. - Two (5 round) S&W 38 special wadcutter steel magazines - Owner's manual. - Weight 40 oz / 1134 g unloaded Note: Serial number has been blacked out in all photos.

categories:Guns

27677 impressions

3232 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. - SMITH & WESSON Model 2206 /22 lr caliber has a solid stainless steel frame, ss slide and barrel - MINT CONDITION /like new in original box / A TRULY SUPERB TARGET PISTOL! - 6 inch /152mm long barrel with Target-Crowned Muzzle - The barrel is milled into the bottom of the pistol's frame, giving it an EXTREMELY low bore axis, thus, creating virtually no muzzle-rise with each shot fired - Very light, short and crisp trigger pull with adjustable over-travel set-screw behind the trigger - Barrel and front sight do not move when the slide reciprocates, making it very accurate with fast follow-up shots - Fully adjustable rear sight for windage and elevation with LONG sight radius, for better accuracy - 4 (10 rnd) steel, extremely reliable S&W magazines - Takedown tool, Rear sight adjustment S&W screwdriver - Spare extractor, springs and retainer pin (included) from the factory - Instruction Manual - Weight 39 oz /1106 g unloaded UPGRADES: 1- Trigger Job by Gunsmith to lighten the trigger pull 2- Professionally dehorned edges by Gunsmith (all sharp edges have been slightly rounded) 3- Modified 1/8 inch grip inserts (installed) to improve the overall grip and feel 4- Stainless steel allen head GRIP screws (lengthened & installed) 5- Grip tape (installed) Note: Serial Number has been blacked out in all photos

categories:Guns

36130 impressions

3693 views

Can do local sale in victoria or shipping depending on location of buyer glock 17 blow back co2 powered realistic slide comes with the carrying case official umarex glock brand bb pistol shoots 4.5mm .177 steel bbs licensed by umarex made by glock it is the .177 co2 bb pistol model can find exact specs on umarex website shoots approximately 365 fps it is in mint condition comes with only the pistol need to buy own co2 cartridges or ammo

categories:Guns

7447 impressions

584 views

ERA made for F.I.E.caliber .410 gauge Side by Side shotgun made in Brazil. 26" barrels Full/Mod.with front bead site,Bores remain excellent,with tight lockup.Wood has some normal dings/marks,blueng is very good, dual trigger, slide safety behind the barrel release lever, English style stock.Very good condition.Local is preferred, but will ship at buyers expense. Valid Pal a Must.Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

40952 impressions

3806 views