Brand new in package. Molded KYDEX construction with suede lining to protect handgun finish. 2 Adjustable belt plates included. Have one for 1911 Retail is in $130 range . Text is best way to contact .

categories:GunsSporting Goods

13165 impressions

1308 views

Brand new Shell carrier for the 12 gauge Remington 870 shotgun Holds seven (7) 12 gauge rounds Made of a precision molded polymer with an aluminum mounting plate Will not contact or interfere with the pump action forend when used with length forends Allows for the individual tension adjustment for each shell allowing the user to fine tune the sell carrier for specific ammunition Made in USA

categories:GunsSporting Goods

6239 impressions

376 views

Brand new The Mini-Clip 2.0 was better than the original but the opportunity presented itself to go further using new highly efficient mold/manufacturing partners right here in Texas. The Mini-Clip 2.0 Flex has the flexibility to accommodate a wider range of short shell lengths, should Aguila ever want to make an even shorter (or longer) Minishell. Re-loaders were very interested in this accommodation as are buyers of Exotic Products Shorty shells in varying lengths. The 2.0 Flex will feed all but the longest in their line, the 3 Buck. Allows use of 12ga 1.75” Birdshot, Buckshot, and Slug shells                  Fits: 12ga Mossberg 500, 590, 590A1, and Maverick 88 models Use with Aguila Birdshot, Buckshot and Slug offerings in Mossberg 12ga 500, 590 and Maverick 88 models Easily installs and uninstalls in seconds to allow use of 1.75", 2.75" or 3" shells as desired by user Practice with less expensive Aguila birdshot as the recoil response vs. Aguila buckshot is slight Low recoil of buckshot allows for safe, easy and comfortable aiming and discharge with pistol grip configurations (with proper grip/face clearance, of course). Not confined to hip and laser shooting Mini-Clip stays in well, but may want to tape in with electrical or Gorilla tape for close contact or heavy foliage environment applications

categories:GunsSporting Goods

7924 impressions

492 views

Chiappa LA322 TakeDown Lever Action Carbine, 22 lr, 920.383 The lever-action 22LR is an American classic. Chiappa continues this legacy by using modern technology and materials to produce the LA322. This beautiful rimfire is as attractive as it is functional. Accurate, quick handling and rapid shooting, the LA322 embodies all the qualities that Americans want in a lever-action rifle. A 3/8in dovetail is machined into the top of the receiver for optics. Another coveted feature is the take down design for easy transport and storage. SKU: 920.383 EAN: 8053670717282 Type of Gun: Rifle Caliber: 22 Long Rifle Action: Lever-Action Barrel Length: 18.5″ (470 mm) Capacity: 15 Feed In: Magazine Tube Trigger System: Single Stock: English Style Wood Forend: English Style Wood Front Sight: Fixed Tunnel Rear Sight: Adjustable Elevation & Windage Buckhorn Style Safety: Half Cock Hammer Weight: 5.52 lbs Length: 35.5″ (902 mm) Material: Alloy Frame / Steel Barrel Finish: Blued Lever Style: Standard Extraction: Auto Ejection FAMILY OWNED – SINCE 1958 – MADE IN ITALY The History A curious nature, a passion for firearms and a love for challenges have always guided our path at Chiappa Firearms. There will always be another challenge to take on and we’ll not be afraid to play the game. The history of Chiappa Firearms began in 1958, when Ezechiele (Oscar) Chiappa opened his company and called it Armi Sport. Initially an artisanal workshop, the company has grown over the years to become an industrial group, still wholly owned by the Chiappa family. Chiappa includes the companies Chiappa Firearms S.r.l. (defense, sporting and replica firearms), KIMAR (blank and signal guns), ACP (training systems), Costa S.r.l. (surface treatment of metals) and Chiappa Firearms USA, Ltd. (USA’s distribution center). The success story of the Chiappa derives from a combination of factors, among which are a great technical experience matured over 60 years; ability, the courage and entrepreneurial spirit of the President Rino Chiappa, and the total dedication to work of the whole Chiappa family. These capabilities have lead Chiappa to a series of winning choices, focusing on technological advancement, on understanding and meeting the needs of the market while constantly introducing new models, but also offering accuracy and continued support to customers. All stages of production are carried out entirely within the company. The manufacturing process begins with the design of the 3D model, followed by the realization of prototypes and the transfer of data to CNC machines. Through specific CAM software, the machining equipment is able to produce any component in a very short time taking instructions directly from the 3D drawings. Order and organization are common to all factory departments: the workshop with numerical control machines (CNC) for the processing of components machined from solid steel such as receivers and breeches, or for the realization of all types of stocks and other small parts; manufacturing of barrels; die casting and molding of plastic material; ovens and equipment for heat treatment; surface treatment, such as bluing, parkerizing, nickel plating, as well as equipment for grinding and polishing of metal and wood components. The entire manufacturing process is managed and coordinated by a computer system that encompasses all steps of production. This system allows for a thorough control of the execution time, thus keeping production costs tightly monitored. Finally, all firearms are visually inspected and test fired in the shooting range built inside the company before being brought to the packaging area. Thanks to the experience of the personnel, the tradition of artisan craftsmanship cohabits with a modern organization within the same factory, fostering maximum efficiency. Chiappa manufactures a wide range of models. The catalog includes replicas of American historic weapons and muzzleloaders, lever action shotguns and rifles, handguns and rifles in .17 and .22 rimfire, sporting and self defense handguns such as the famous Rhino, signal guns and air guns. As a direct result of the optimization of the manufacturing process, all Chiappa products are an excellent value. Chiappa today is a rapidly developing, constantly evolving corporation. The great capacity to innovate with flexibility and dynamism, the wide range of products and the excellent value for the consumer have allowed Chiappa to spread sales in 60 countries, being fully able to compete with the biggest companies in the world.

categories:Guns

46829 impressions

3745 views

If you want to make better steady shots on your game from gophers,coyote,bear,deer,elk,Moose. Our tripod shooting rest is not only the only shooting rest that has 2 rests on one shooting rest.. designed by a Canadian from St Albert Alberta Buy direct from us. Or see us at 1 of the many gun shows we do in Alberta,Saskatchewan . You can set this one rest into 2 positions to use at any time while hunting or shooting for better shot placement.you can go from prone(laying dow) to all other positions ,kneeling position ,to a full standing position. Steady shooter tripods work for shooters from 4 ft tall to 6'6"+ Fully ajustable and suited for all applications to steady your rifle. Made of the best materials. Other stands out there being sold are not built as well as ours but you will pay from $180-$250.00 plus tax limited time price : Shipping included : Buy 1- TRIPOD = $135.00 Buy 2 -TRIPODS = $240.00 Buy 3 -TRIPODS = $350.00 Above prices INCLUDES shipping. BUY NOW AND SAVE. Call us and order a FEW TRIPODS SAVE $$$ and make better shots,also use them as a walking stick too. E-TRANFERS on all orders Thanks for buying the best made SHOOTING REST ,Tripod. STEADY SHOOTER TRIPODS. (They make a great gift for the hunter that has everything.) 306-221-9599 text or call More information on the shooting tripod you may want to read below. The SteadyShooter is the best portable shooting support on the market. Price is about the best price on the market.   The SteadyShooter is light-weight (approx. 985 grams or 2 pounds) and the legs fold together which makes it easy to carry with you at all times when hunting.   SteadyShooter has a fully-adjustable side rest which can be used to instantly shoot from a kneeling or sitting position. In my experiences this is a very useful feature as sometimes getting up for a standing shot can spook your animal away. To my knowledge, no other shooting rest on the market has this feature.   The above-mentioned side-rest  can also be used to allow shooting from the prone position.   The legs have two telescoping sections so they can be varied in length from 32" to 75".  However, using the side rest you can support your rifle at a height as low as 6" (ie. prone position).   The SteadyShooter sets up in seconds when a hunter carries it with the legs extended to his/her preferred length.   The V-yoke rotates 360 degrees and provides a very steady support for your rifle.   The V-yoke and side-rest are both nicely padded with soft rubber to protect your gun.   SteadyShooter folds into a small convenient package (3½" X 35") for transport and storage.   The legs are aluminum and the other parts are molded plastic and/or rubber.

categories:GunsSporting Goods

78834 impressions

7789 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2551 impressions

396 views

Hogue Ruger 10-22 Ghillie Green Stock for 0.920 Bull Barrel, 22810Hogue Ghillie Green 159.99$ Black ........... 119.99$ Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Stocks are constructed by molding a super strong, rigid fiberglass reinforced skeleton, or insert, that precisely fits the long gun’s action. This rigid skeleton is then OverMolded with a durable, but soft, synthetic elastomer (rubber). During the heat and extreme pressure of injection molding, the elastomer adheres chemically as well as mechanically to the skeleton, resulting in a permanent bond between the rubber and the insert. The super strong skeleton gives the stock its strength. The precise molded dimensions provide a perfect drop-in fit of your rifle.

categories:GunsSporting Goods

6407 impressions

634 views

CVA SCOUT, 350 Legend, single shot break open rifle, black, CR4817 Box will cut to reduce shipping cost Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available For 2020, the new SCOUT™ Blued/Black models are our most basic break-action centerfire rifles, but are plenty of gun to get the job done for the budget-minded hunter. Whether you’re looking for a youth’s first hunting rifle or a compact truck, camp or brush gun, the SCOUT™ is a great choice. For the hunter who wants a high-quality single shot rifle, the SCOUT™ is the ideal choice. Its sleek, lightweight, and easy to operate design sets a new standard for affordable single shot hunting rifles. Every stock is lightweight, 100% ambidextrous, and features CVA’s CrushZone® Recoil pad – a real plus for heavier calibers like the .35 Whelen. For 2020, the new SCOUT™ Blued/Black models are our most basic break-action centerfire rifles, but are plenty of gun to get the job done for the budget-minded hunter. Whether you’re looking for a youth’s first hunting rifle or a compact truck, camp or brush gun, the SCOUT™ is a great choice. Features & Specifications Model : Scout Color : black Caliber : 350 Legend Barrel Length : 20″ LOP : 14″ (Trigger to butt pad) Standard adult size Action : break Capacity : 1 Scopability : Picatinny base installed (picture shows Weaver base) Checked Grips Stock Materiel : Polymer Sling swivel studs : Rear has A molded hole for A clip, front has A hole for A stud. Hammer extension : installed Butt Pad : Soft black rubber

categories:GunsSporting Goods

7704 impressions

784 views

Protect you firearms, camera equipment, laptop, collectables, valuables.............. Model 1495 Protector Case • Medium Protective Case • Foam • Fits up to 17" Laptops • Watertight, Crush Proof, Dust Proof • 3 dial combination lock included • Fold down over molded handle • Easy open Double Throw latches • Automatic Pressure Equalization Valve • Stainless steel padlock protectors • Pick N Pluck with convoluted lid foam • Case Specifications: • Exterior Dimensions (L x W x D): 21.62" x 17.25" x 4.87" / 54.9 x 43.8 x 12.4 cm • Interior Dimensions (L x W x D): 18.87" x 13.12" x 3.81" / 47.9 x 33.3 x 9.7 cm • Lid Depth: 1.12" / 2.8 cm • Bottom Depth: 2.68" / 6.8 cm • Total Depth: 3.80" / 9.6 cm • Interior Cubic Volume: 0.55 cubic feet/ 15.46 cubic decimeter • Weight: 8.37 lbs. / 3.8 kg • Weight without foam: 7.23 lbs. / 3.28 kg • Buoyancy Max.: 45.15 lbs. / 20.48 kg • Temperature Range: -40 / 210 degrees F (-40 / 99 degrees C) • Colour: • Black 10 Cases Avail

categories:GunsSporting Goods

1709 impressions

309 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2465 impressions

357 views

Brand new Sealed in original package Description: 3 MOA Red-Dot with Adjustable Brightness MOTAC: Motion-Activated Illumination 1x Magnification/30mm Clear Aperture Fully Multi-Coated / Aspheric Lens 100 MOA Windage & Elevation / 1 MOA IPC CNC-Machined Magnesium Housing TruHold Lockless Zeroing System Waterproof, IPX7-Rated Picatinny & KeyMod Mounts Made in the USA Sig Sauer engineered the ROMEO1 1×30 Open Reflex Sight to enhance your firearm’s aiming capabilities. Its 3-MOA holographic illuminated reticle offers a brilliant red dot with adjustable brightness and Motion-Activated Illumination System (MOTAC). You will see your targets with clarity thanks to a specially-designed, aspherical lens that generates flat and distortion-free images. To enhance transmission of light and to eliminate glare, the lens is also treated with high-performance full multi-coatings. To account for wind and ballistics, the windage and elevation adjusters offer 100 MOA ranges with 1 MOA increments. Designed to endure the toughest battlefield conditions, this sight is packaged into a compact, durable, lightweight, and waterproof housing. To increase durability, the housing was CNC-machined from a single piece of magnesium. Another highlight of the construction is a TruHold twin-spring adjustment system. It is designed and endurance-tested to withstand handgun recoil, deliver lock-less zeroing performance, and to return to zero with impeccable repeatability. Reticle: Red-Dot reticle: 3 MOA 1 MOA impact point correction 100 MOA windage and elevation adjustment range MOTAC: Motion-Activated Illumination Optical Performance: Magnification: 1x Molded glass aspheric lens High-performance coatings Unlimited eye relief Mounting Compatibility: Picatinny rails KeyMod panels Construction: CNC-machined magnesium body TruHold twin adjustment springs ensure a lock-less zeroing and repeatability Waterproof and fogproof Shock-resistant $520 shipped Not interested in trade Thanks

categories:Guns

15297 impressions

1536 views

Brand new Description: This optic goes on the 320 M17 – 320 LDC – 320 LDC PRO – 320X5 and 320X5 Legion Designed for fast, responsive target acquisition and accuracy, the ROMEO1PRO miniature open-reflex red dot sight was engineered to withstand the punishment of harsh environments. With an upgraded emitter for superior brightness and outstanding battery life, the ROMEO1PRO is capable of mounting to any SIG SAUER pistol or any other pistol machined to accept the ROMEO2 / PRO reflex sight interface and mounting hole spacing using the included M4 mounting screws. – Molded glass aspheric lens with high performance coatings for superior light transmittance and zero distortion – 3 MOA red dot with multiple brightness settings for rapid target engagement under a full range of lighting conditions – TruHold Lockless Zeroing System that utilizes twin adjustment springs designed to endure handgun recoil and return to zero shot after shot – New point-source emitter provides exceptional brightness with 12 settings (10 Daytime/2 NV), and 20,000+ hours of runtime – MOTAC (Motion Activated Illumination System) that powers up when it senses motion and powers down when it does not – Aircraft grade CNC Aluminum housing ensures a lifetime of reliable service – Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fogproof performance – Ruggedized protective steel shroud included for extreme durability – SIG SAUER Electro-Optics Infinite Guarantee and SIG SAUER Features: Color: Black Weather Resistance: Yes Objective Lens Diameter: 30mm Magnification: 1x Lens Material: Glass Fabric/Material: Aircraft Grade Aluminum Attachment/Mount Type: Picatinny Reticle: 3 MOA Dot Gun Model: Sig Sauer Length: 1.8″ Height: 1.1″ Adjustment Type: MOA Battery Type: CR1632 Weight: 0.06 lb Included Accessories: Mounting Screws Brightness Settings: 12 Water Resistance Level: IPX-7 Illumination Color: Red Width: 1.2″ Battery Life: 20000 hours Objective Window Size: 28x18mm

categories:Guns

8743 impressions

866 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

3947 impressions

443 views

Brand new Designed for use with all M-LOK compatible hand guards and forends. The 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. The M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 11 usable slots and a max overall length of 4.9". Mounts directly to M-LOK compatible systems. Multi-directional mounting Intermediate spacing option Lightweight reinforced polymer Cammed T-nuts Recoil / impact mitigation lugs Made in USA

categories:Guns

2485 impressions

334 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2493 impressions

421 views

Feed your old beauty, make her and yourself happy again! Newly made 41 Swiss brass cases from brand new Starline 50 Alaskan brass cases：cut，annealed with AMP annealer，formed using Lee 41 Swiss full length sizing die，trimed with case length 1.525”（ Observed that feeding reliably with loaded ammo OAL length between 2.180“-2.220”, so with 0.005'' extra length for possible cast bullet variation, instead of 1.520'', easily trimed off the extra 0.005'' brass if you don't like it ), cleaned off lube then annealed once more, tested to extract and eject reliably. Ready for reloading. 9$ each+shipping , minimum 12 pcs. Have some hard cast bullets cast with customized heeled bullet mold designed by myself (http://accuratemolds.com/bullet_deta...bullet=43-310F) to go with those cases if you desire, all lubed with Alox and sized with .429'' Lee bullet sizer, lubed with Alox again ( tested free of leading, even after more than 100 shots, no leading observed: yes, Vetterli is so fascinating, I did extensively loading test with more than 1000 rounds through my M78 and M69/71 and then designed my own bullet for her and am thinking of designing a paper patch bullet. ) , tested to be working quite well : check those 5-shot and 10-shot groups shot at 40 meters indoor range with 1869/71 Vetterli rifle). Ready for reloading. 0.5$ each+shipping, sorry, 3 bullets per case ordered limited due to limited bullets quantity, no place to cast bullets during winter time, should be able to cast more bullets after winter. With my cast bullets and Lee 41 Swiss full length sizing die sized brass cases, you can hand seat the bullet, then use Lee 41 Swiss seating die with seating stem removed to give the loaded round a very firm and consistent crimp at the first groove from the bottom ( the seater will clear the bullet instead of the case mouth), by feeling that the case mouth brass is crashed a little bit ( it is ok that the bullet might be turned by hand inside the case mouth after crimping, but it would be firmly seated, won't be pulled out by hand)，don't go too much，too much crimp might cause the case mouth bumping up too much and you might encounter difficulty to chamber especially with those Vetterlis with tighter chamber. Photo 5 & 6 show that the right one was hand seated before crimping, the left one was properly crimped, and the abovementioned cast bullet. FYI only, use it at your own risk: I found using the recommended charge from the internet of 11 grains of Trail Boss to be around 2200 fps and kicks hard，eventually I reduced the charge to 7 grains of Trail Boss to achieve around 1400 fps, very close to Vetterli designed velocity and very mild and pleasant kicks, no grease cookies, no wads needed. I rendered that the 11 grains of Trail Boss charge was gained from improperly reloaded rounds not using heeled bullets and not getting proper crimp. I did tests with Tripple 7 also, found the data on the internet is way too much also, I got 1900 fps muzzle velocity reducing the charge to 24 grains by weight of Tripple 7, which is only half full of case capacity！I did not go further experimenting with Tripple 7, cause I got very good results with Trail Boss, and I did not enjoy cleaning the bore after every range trip burning Tripple 7.

categories:Guns

8620 impressions

773 views

Great that front sight on SKS can be moved vertical & horizontal. Can be used without removing existing sight but better to take that off. Improves grouping a lot. Shipping included. I used double sided 3M tape on my rifle BUT apparently using RTV Silicone is easier to get sight into the correct position. Epoxy is too brittle and sight can fly over your shoulder after 15 to 30 rounds. These are cased in Titanium after I had a mold produced after trying out a few machined pieces. Mold cost me as much as producing a few hundred. I will ship in stiff cardboard envelope. Payment via Interac or paypal. Located in Waterloo, On.

categories:GunsSporting Goods

7634 impressions

736 views